HP Officejet Pro 8610: Blue/gray violet and pink print

Similar Questions

• HP Officejet Pro 8610: Impression of Bank and investment statements

  I have a new HP Officejet Pro 8610 and it works fine, except when I print bank statements or investment.  The documents look good on my screen, but when they are printed there are black boxes on some parts of the statement.  I tried to print from two different banks and black boxes are in different areas.

  Found the solution by reading a similar problem in the HP Forum.  I was with Google Chrome to enter the Web site, but when I went to Web sites through Explorer all-over print very well.  Problem solved!

• OfficeJet Pro 8610: Printing on HP Officejet Pro 8610 doesn't give any form printing

  Hello

  I'm trying to help a client to their printing problems.

  They have a Windows Server 2008 R2 Foundation install, they are trying to print from. The printer appears to have been installed properly and had been using the steps described in this article: http://support.hp.com/us-en/document/c03351547

  The issue, is that even when to print a test page, the page of the coils in the window "See what's printing" and disappears, as if she had been sent to the printer. No page out of the printer.

  I restarted the server several times.

  I can ping the IP address of the printer, and I can also access the page via Chrome.

  The Officejet works with their computer Windows 7, which are on the same network.

  Am I missing something?

  I was able to solve this problem by following the steps described in this article: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/No-print-from-Windows-7-Desktop-and-Officejet-Pro-8610/m-p/5120498/highlight/true

• New printer, HP Officejet Pro 8610. Unable to get the printer added to my Windows 8.

  New HP Officejet Pro 8610.  Cannot add the new desktop printer.

  Hello

  Please, download and run the Installer printer HP www.hp.com/go/tools

• OfficeJet Pro 8610: Times New Roman fonts will print on HP Officejet Pro 8610

  My new HP Officejet Pro 8610 not print documents, spreadsheets or test pages to printer containing the font Times New Roman (of any size).  It does not have a job in the print queue.  In Excel, I get the error message "Generic_2_Q294552".

  My configuration: computer a HP Pavilion Elite NY809AV-ABA e9119t; running Windows 7 Enterprise SP1; HP Laserjet 5 L, HP 1310 PCS and HP D4360 all print do it very well.

  My new printer: HP Officejet Pro 8610, FDP1CN1502AR firmware revision, connected via a USB cable.  [Also connected via a cable to cable modem ethernet.]

  What I've done so far to help out the last 3 days: reinstalled printer (3 times), the most recent today with a published installer today. restarted the printer; restarted the computer after every significant change; updated the firmware in the printer; tried two different USB cables; tried to print fonts in Microsoft Word 7, Microsoft Excel 7 and directly from the font file; Reinstall the fonts Times New Roman of backup; visited the forums and tried all the solutions I have for any similar problem; tried the winprint, hpzppw71 and hpzpplhn print processors with RAW and NT EMF 1,008 formats data types; found and fixed all the problems I have found with all hardware and software, as well as to the latest updated version of the software.

  Finally, I seem to have problem solved for me.

  First of all, a few comments, just for the record:

  -in the affected user accounts, "Print Test Page" fails in the printer properties, but HP printer & Scanner doctor said that everything is okay, and printing test page without any problems

  -newly created user accouts working fine

  In the end, I recognized that my user accounts have a default TEMP variable: I redirect to the HARD drive to avoid piercing main SSD drive for temporary files. Setting permissions on this directory to the user everyone "Full control" (not only 'Edit'!) does the job: printer starts to print correctly. Phew!

  I hope that this helps you, Tom and others get this problem!

• HP OfficeJet Pro 6830 constantly go 'offline' and cannot print

  Hello world.

  I love my HP OfficeJet Pro 6830. It does everything I need a printer / scanner but it is one of the aspects that are really starting to annoy me and my family (i.e. my WIFE!) - he continues to go 'Offline '.

  I understand perfectly that it needs/desires to go to save mode, when I'm not using it or have not used for some time, but for now, every time I have seem to need to use it (after I have not used for some time) of energy, it is listed as 'offline' and the only way I can print is stepping on him , turn off, turn it back on, wait a while so it connects to my WiFi network and then have another go. Then it works... and prints the other five copies of the document that my eager family tried to print!

  "HP print and Scan Doctor" said he of just nothing wrong and just suggest just uninstall and reinstall. I already tried and it changed nothing. Same problem with Windows 7 and 8.1. It will print a page of 'internal' test, but not via Windows test page.

  I also tried to restart the spoler and checked the 'File and Printer sharing' settings, the firewall settings and looked at the network discovery and run various windows troubleshooting tools without result. Nothing works, but the HP Officejet Pro 6830 software can see / communicate with him! It's so frustrating.

  Someone at - it ideas? This really, REALLY boring. Thanks in advance to anyone who donated their time to help me.

  Regards,

  Steve.

  Steve take a look at this link posted by JonW.

• Affecting HP OfficeJet Pro 8610 without borders on and printing double-sided "return on the long edge.

  I want enabled no border and return on the long edge, I got another printer installation.  But on the 8610, I get the same dialog box and chose of ' keep this setting, and I will change it later ", but it does not allow me to have the two settings in this way.

  I have some WONDERFUL NEWS!

  The 8610 printer (and it was the printer 8600) replaces my HP
  OfficeJet 9110, which I've owned for about a decade.

  My "existing" Linux computer cannot print on it.  (I have a very old)
  Version of CUPS and at the time I gave it - and I don't have a lot of time
  -I have not been able to install a more recent version.)  But, my most recent office
  Computer Linux is a system of 20 of Fedora.  (And, the goal is to have the most recent
  Linux Desktop become my Linux after I get everything copied and
  configured for it).

  Last week, I installed a new version of HPLIP on it.  Is not only
  It give me the ability to print in duplex/duplex, but it also prints
  without borders!

  I am able to print without margins and double-sided printing, using half of the book
  Once again!

  I'm happy with that resolved, now that I've installed marked HPLIP!  :-D

  Barry

• HP Officejet Pro 8610: Deleting a document of spooling print

  Help! I have a paper stuck in spooling it print. I tried everything I can think but cannot get rid of it. I need to print other documents as soon as possible and am short on time.

  Hello

  Follow the HP print and Scan Doctor below by selecting difficulty Printing, which should erase any document of the coil:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Kind regards

  Shlomi

• Print reverse Officejet Pro 8610

  I print on an Officejet Pro 8610 ((Windows7 64-bit) and it prints in reverse order.)

  I have hunted everywhere and cannot for the life of me find out how to stop printing in reverse order. What Miss me?

  Help please!

  Hmm... I just downloaded and installed the Officejet Pro 8610 driver for Windows 7 x 64 system and I can confirm that it has no order of pages option.

  You can install another driver which would be compatible with the 8610, but offers more options.  I suggest the driver Deskjet 6980, which can be installed as follows: click on start, devices and printers, click with the right button on the Officejet Pro 8610, properties of the printer, Advenced, new driver, Next, Windows Update, (wait a few minutes to appear in the update list), select HP (Hewlett-Packard) for the manufacturer, then HP Deskjet 6980 series (HP) , Next, Finish, general, Type a new name for the printer - it will be changed for HP Deskjet 6980, you probably want to go back to HP Officejet 8610, apply, OK.

  Order of pages can now be set in the Advanced tab.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• HP Officejet Pro 8610: printer says ink cartridge is damaged

  Hello, my printer was working well, but the colors were not true to life printing.  I tried to print a page of print quality diagnosis and this prompted to say that the ink cartridge is damaged. Now, it will not be printed. Help, please.

  Hi @sooz01,

  I see that you get an error message "ink cartridge is damaged. I would like to help you today.

  Please, try the following steps to see if it will solve the problem.

  'Missing cartridge' or "Incompatible cartridge" Error Message is displayed for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640 and 8660.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• 8610: unlock the administrator settings on my officejet pro 8610

  How to unlock the administrator settings on my officejet pro 8610?

  Hello and welcome to the community of HP @jujupud,

  I understand that you want to unlock the settings on your HP Officejet Pro 8610 administrator, but you forgot the password. I'll be happy to help you.

  Your printer will have to be reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.
   
  Thanks for posting in the Forum from HP Support. Have a great day.

• HP Officejet Pro 8610: Printer paper mangles

  I bought a HP Officejet Pro 8610 a few months ago to use mainly for scanning and copying for a home business.  I could not get the printer to print a sheet of paper without deformation of paper and printing things on an angle.  I use paper nine of a ream of fees.  I tried to reload the paper, using less paper in the tray, using more paper in the tray, etc.  My main Canon printer has recently died, and now I have to be able to print business documents and controls on my HP printer.  Any suggestions?

  @Suepatpi

  Welcome to the Community Forum of HP.

  A few ideas

  ========================================================

  The printer may need to be aligned after you do not use as a regular printer for a long time.

  Problems print quality for the e-all-in-one printer series HP Officejet Pro 8610, 8620, 8630, 8640 and 8660

  Down 2/3 of the way through the document, find "step 4: calibrate the line break"-you want to complete it!

  ========================================================

  Belle is not usable equal

  The HP 8610 can care for the moisture content of the paper, or maybe the printer doesn't like the weight of the paper you are trying to use.  This is the simpler, more straightforward answer.

  Assuming that you selected correctly before the type of media in the printing preferences for the printer knows what kind of paper to expect and how to react - the printer is maybe not able to manage this particular test.  If this is the case, and regardless of the perception of the quality of the paper, there is no way to force the printer to accept this document.  It is not a question of "bad paper" - it is a question of how the printer sensors respond to the book.

  Beautiful paper is not always equal paper which is printed on each printer.  HP printers are not the only picky ones in the world.  All printers of high quality can respond to the report in this way.  You don't have to use paper HP, is told by the way.   Try different papers.  Place this paper somewhere cool and dry to store and try again later.

  ----------------------------------------------------------------------------

  Printing preferences

  If you have not already done so, you can set the media type in printing preferences.

  Setting the media Type tells the printer what kind of paper be expected; the printer sets the reels and the spring tension to pull the paper into the printer correctly.

  Printing options

  ----------------------------------------------------------------------------

  The case of the order of the missing pages

  You mentioned something in passing that might be important:

  You will use your OfficeJet 8610 to print checks.

  If printing of cheques requires a feature 'Page Order' of the printer, you may be interested in the following:

  Printing options

  See the entitled subject

  • Page order - front to back / back to front
  • • Option 1: Use the OfficeJet Pro 8600 driver

  ----------------------------------------------------------------------------

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Problems printing to office 2007 - OfficeJet Pro 8610

  I have a new OfficeJet 8610 Pro who don't print from Office 2007 (Word and Excel). Print jobs that are submitted to the printer go into a black hole somewhere and never find yourself in one file printing or to the printer.

  To support cat HP printer driver DeskJet 6980 to allow printing, but I consider that it is a workaround rather than a permanent solution.

  I can print from a web browser form. I can't print a test page with the devices and Sound > devices and printers > HP OfficeJet Pro 8610 (network), but I CAN print a test page for print management > custom filters > all printers > OfficeJet Pro 8610 (network).  FAX and scan to work. I can access the printer through the built-in Web server.

  Suggestions or help?

  My environment: I-7 desktop PC running Windows 7 Pro SP1 with all the current patches. 8610 printer connected via ethernet using the static IP address.

  Printer: driver 13.33.0.2473 software 032.000.090.45518 firmware FDP1CN1416AR

  Fixed a problem. I created a new user (account) Administrator profile and found that I was successfully able to print to the 8610 since all Office 2007 applications.

• HP Officejet Pro 8610 e-All-in: no internet connection

  Hello

  I bought just for HP Officejet Pro 8610 e-all-in-one printer and did the whole upward according to the instructions. everything is fine except for the fact that the printer does not connect to the internet. Although I had no problem to being of network discovery and connection for some reason when I'm checking updates, that it is said that the printer does not have to connect to the internet. I tried ethernet also and always had the same questions.

  any advise will be greatly appreciated.

  PS: all other devices on the network have any connecton from Internet, only the printer

  Hello Evan_,

  Welcome to the Forums of HP Support!

  I see you are having some problems with the Officejet 8610 Internet connection, I would like to see if I can help. Please try to apply a manual IP and DNS to the printer. You can learn to do it by following the steps here: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection, three Solution.

  After you apply the INVESTIGATION period, defining the DNS is done after on the same screen. Use these information for DNS: 8.8.8.8 & 8.8.4.4

  Good luck and let me know the out come.