HP officejet pro 8610: Error message print Officejet Pro 8610 after 30 seconds

Similar Questions

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Why do I always error: message of 150:30 even after download of Java 6 & restart my computer?

  I work with an iMac 27 "bought in 2011.

  Why do I always error: message of 150:30 even after download of Java 6 & restart my computer?

  Please click on the link for the same question below.

  150:30

  Let me know if it helps.

  ~ UL

• I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

  Then double-click on the .exe file (2 of 2) it will start the installation process.

• Persistent error message: printer failure

  Office Jet Pro 9600

  I tried to realign and then clean the print heads. Once this is done, I started to receive an error message "error in the printer: there is a problem with the printer or ink system.» Turn the printer off, then on. If you continue to receive this message, contact HP. »

  There is a help button on the bottom of the error message and when I click it, it adds a proposal to put off the printer, unplug the unit and then turn off again, when I do this, I keep getting the above error message.

  I'm not sure how to "contact HP" as the support Web page does not appear to be one way to do (other than paid support).

  Thanks for any help you can give me.

  After checking, I found that the print head should be replaced. The cost of the printhead (from Amazon.com) more than $ 100 (includiong of ink), but a new Officejet 8600 Pro costs less than $100 at a local Office Supply Chain Store. I bought a new and don't have the problem anymore.

• LaserJet Eprint error message: printing delayed Due to print some documents/not connected

  It's so good that I get an email telling me my eprint status - but it's so frustrating error messages are not correct.  The printer is connected, the printer does not print other documents!

  How did someone else solved this problem?  It is usually intermittent, but at the present time, it is constant.

  Thanks in advance

  @KiwiKate

  Great! I'm so glad you're back on!

• Error message Printer Spooler 0x000006ba

  • After months of successfully use a HP Laserjet 1012 with Windows Vista Home Premium edition, I received the following error message: 'impossible operation finished (error 0x000006ba). The local print spooler service is not running. Please restart the spooler or restart the machine. "Restarting the machine or the spooller does not help. Checking system files shows no problem.  Windows Vista has improved with all the current upgrades.  I can't print with the HP 1012 currently.  This error does not appear when you search the Microsoft Web site.  I suspect the print spooler file was damaged, but do not know how to remove and replace.

  Have you tried uninstalling the printer software, and then reinstall the printer and its software?

  Who will corription in the printer software.

  Mick Murphy

• SE error message: printer could not be removed. Error 0x000006be"and new Kodak 7250 printer do not print

  Original title: new Kodak 7250 printer print a vista computer

  I'm trying to help my brother who lives in another State set up his new printer Kodak 7250.  After you install the software it is plugged into the USB port.  Vista has detected new hardware and did his thing, and everything seemed good.  However, it would not print from the computer.  The printer is listed and selected status, however, stated that it was not connected.  We contacted Kodak tech, they take control of his computer.  They have tried to delete the printer but could not... "Printer could not be removed... Error 0x000006be ".  Tech said problem wasn't Kodaks and contact Lenova on bad print spooler.  We checked the print spooler, which was running and in auto mode.   We tried several times to remove the printer and start over, but shows the same error.  Any help from anyone would be appreciated.  BTW, her worn old HP printer had no problem.

  Hi vbrown7,

  You can try to let flow the Fixit and see if it helps:

  Links:

  Problems of print and error - a Mr Fixit of printing

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit

  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  Also see the article and check.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»

  http://support.Microsoft.com/kb/946394

  You can also check out the following link and try the steps suggested by Arthur Xie Microsoft, Moderator on Monday, June 1st, 2009 09:39

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/

  1. you use an administrator account?

  If this isn't the case, then you should use the administrator account and check.

  Also, try to create a new administrator account and check if the printer is able to be viewed / deleted.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• startup error message: printer card transfer moniter has stopped working

  Thank you for your help.  I said that Microsoft will try to solve the problem... but the error message continues appeaering.

  Hi SIDDTHEEKIDD,

  1 when was the last time it was working fine?
  2 are you facing problems with the printer on the computer?

  It is possible that some third-party programs installed on the computer are causing the error at startup.
  I suggest that you perform the clean boot procedure and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error message printer 7510, 'Impossible to communicate with the printer' I can't print from my desktop, laptop

  7510 HP e-All-in-one-C311a printer, Windows Vista, giving following error message when I try to print from my counter top "Unable to communicate with printer" also portable print request print not and my iphone does not find the printer.

  has run the wireless network, no problem not detected test results

  the status of the printer report, network status: ready, connection type: wireless

  has run HP page configuration, all good here

  Thanks for your reply, I read one number of other questioned posted here, and numerious corrections was to unplug the router, so I tried and it fixed the problem... once again thank you for taking the time and answer my question.

  Jimmie

• Error Message printer clock no installation on X 576

  I have just installed a new X 576 yesterday and now I get a message at the start of the printer there is an error in the configuration of the clock. I have correctly installed the clock via the control panel preferences, the date/time function reads correctly. What Miss me or is the fault of the clock?

  The text of the error message was "the product has detected an error with the clock of the product. Problem with the preparation of the printer.

  Solution? 1. open and close the cartridge door.

  2. - or - turn on the printer.

  3. - or - the printer Service,

  I did 1 and 2 and also updated the firmware in the printer to the latest version. So far, the problem has not reappeared and seems much more the printer after printing documents.

• Error message printing everytime I print

  If I get a an error of printing every time I print.

  What I tried

  Re install the printer driver - same question

  Compensation to print spooling - emptied

  Test print - same question

  I can test the printer itself from the interface of the printer and it prints.

  Toner - Full

  Paper - Yes

  Connected - Yes

  Run Windows Fix - says there is no problem with the printer

  I tried as admin - same question

  Updated everything in my windows update - same question

  Someone else has a similar problem

  My printer is ST9325 Source Technologies

  IM using Windows 7 Professional

  I also have linux on this computer but I don't think that would cause a problem on a separate hard drive cause

  Hello

  Welcome to the Microsoft community. I will certainly help the issue that you are facing.

  To better understand the issue, I would like to ask you a few questions.

  1. When was the last time it worked fine on the same computer?

  2. What is the exact error message or the error code that you receive when you print?

  This question arises due to a corrupted driver or a conflict with a third-party security software.

  I recommend to disable the security software on your computer and check if the problem persists.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  If the problem persists, I suggest to uninstall printer completely and reinstall it. To do this, follow the steps mentioned below.

  Step 1: Uninstall the printer

  Uninstall the printer driver and the software completely. To uninstall the printer.

  1. Open printers by pressing the Windows key + X.

  2. Then click on Control Panel.

  3. Then click on hardware and sound.

  4. Then click on printers.

  5. Right-click the printer that you want to delete and then click on remove.

  To uninstall the software that was installed with the printer. You can go to programs and features and uninstall the software associated with the printer. To uninstall a program, you can check out the following link.

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Step 2: Install the printer

  Install the printer referring to this article:

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-7

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• Cannot find the error message printer

  When you try to print via bluetooth Mac OSX 10.8.5 on my Photosmart Premium all in one 309 has to get the message "print - printer.  Why?  How to solve?

  Hi hay3911,

  Thanks for letting me know that the problem is solved. {Happy Dance }

  Remember to mark the Message 5 post that solved the problem like "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• 08:04 error message. Designjet T1300. After the update of the firmware. 47%

  Hello!

  I have a problem with my printer, DesignJet T1300. After the firmware update he began to complain of oblique paper, showing error 08:04 error message and ask to restart or to load the latest firmware. From time to time, he showed the message and sometimes it allows me to go further and the menu without any error. Now, it stops at 47% and doesn´t let me not to do anything.

  The printer is three years old and I printed 4 rolls of paper. How to load the original firmware? It doesn´t I would go in the menu with the previous firmware. (The last time I checked there is only firmware December 2013 and the new - neither one works)

  desperately yours.

  Kjell

  Hi bessam_thabet,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• Error message cannot open Control Panel after installing the bsaving, missing rundll32.exe application.

  Original title: If I reinstall Windows XP is that what he's going to recover my rundll32.exe file?  It cannot be found anywhere. Thank you.

  This has happened after I acquired a discount to purchasing application called «bsaving» Now I can't access control panel to uninstall the software.

  Hello

  (1) what exactly happens when you try to open Control Panel?
  (2) what is the accurate and complete error message?
  (3) don't you make changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

  Method 2:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  For more information, please see the link.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope this information helps!