HP officejet v40xi problems

Similar Questions

• I replaced my color for an officejet v40xi ink and red ink does not work.

  Red ink ran out so I replaced the color ink cartridge in my officejet v40xi and Red does not.

  What can I do to fix this?  Thank you.

  Hi timinob,

  I understand that your printer is not printing red ink.  I'll take a look at the document below.

  OfficeJet v40xi

  Let me know how it goes.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• HP officejet v40xi prints partially on windows 7 on bootcamp

  Before the hp officejet v40xi printer worked correctly on windows 7 on parallels. Now, I have installed windows 7 on bootcamp. Since then, the printer does not work. It prints the pages partially. It stops printing after a single page. So, whatever advice kindly int.

  Thank you

  If the update failed, then what is the error?

  You are able to install some other updates?

  What is your system date and time correct?

  Try to turn on your printer and run the update.

  You can also run this tool:

  http://support.Microsoft.com/mats/windows_update/

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• Scanning with Officejet 6500 problems

  My Officejet 6500 printer will scan only from my computer when there is a usb cable attached. Remove the cable, no sweeping. FRO the last 2 weeks in HP Smart people have been scratching their collective heads trying to solve the problem. Is there anyone else with this problem. Maybe we could all have a collective scratch! 2 weeks of my life on this Arghhhhhhhhhhhhhh

  Dear Scratchmyhead,
  
  I have the same problem with the same printer.
  Indeed, it is the error through the programming of the two-way communication via Wifi.

  There is error on HP sid, and they do not have a solution.
  There is a simple solution which is somewhat tidious, but it allows you can scan to receive ink levels wireless and wireless.
  On your printer, go to;
  Configuration > network > view network summary > discovers wireless

  On this page, you will see your printers IP address. Write this down (or remember).
  Return to your computer, open a new tab in a web browser. (IE, Firefox, Chrome, etc.)
  Enter your printer's IP address in the URL bar.
  It takes you to a page that says:

  "Officejet 6500 E710n-z.

  It's your "Built-in Web server" printers

  If your printer is connected to your network correctly, you should see;
  
  Status: loan

  The estimated ink levels: *.

• HP Officejet 5610: Problem with cartridges

  At the moment I can't print more. Whenever the 'Problem with cartridge' message appears. I use no original HP cartridges. Mid October HP provided for a large number of models of an update to resolve this issue. I have not found a link for my model (Officejet 5610). What can I do?

  Thank you.

  Hello @ErikDC

  Thank you for showing your interest in the HP Forums! I see that you are getting the error 'Problem with cartridge' with Non HP cartridges. I would like to help.

  Your printer has not been affected by this update: dedicated to experience better impression.

  You can try these steps, but no guarantee they will work with the cartridges Non-HP: 'Incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series.

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers! Good luck!

• Printing for Officejet 6700 problems

  Recently I struggled to print the word document.  I worked about 3-4 days ago.

  I have windows XP with MS Word 2010.  Printing is HP Officejet 6700 Premium.  I always use it offline.  It is connected to the computer via the LPT connector.

  The test page is printed.  But the word document does not work.  I also tried the computer laptop and excel documents, and I have the same problem.

  I know it's something very simple (at least I feel like that) bit is very annoying when you need something printed.

  Please help me or direct me to request additional assistance.  Thank you.

  JCM

  Take a look at this link for the print queue.

• HP Officejet 4630: Problem installing HP Officejet 4630

  Hello

  I hope someone in these forums can help me get my printer to work.  I currently have a HP Officejet 4630 who can no longer printer from my computer Windows 10, and I don't know why.  I first had the problem when I upgraded my old computer to 10 Windows, the computer sees the printer, but when it will install the drivers, it says that it cannot connect to the printer wirelessly or wired.  I can print to the printer from mobile devices (iPhone, iPad) simply not my main computer.  I have an older model HP Envy 120 that I can view and print for just fine, but it is my printer to work and I prefer not to use it for day to day general printing which is not a related work.  I think that it is a firewall problem, but to be honest, I don't know how, or what are the changes that I need to check if this is the problem.  When I look at the printer in printers and driver section, it says that the printer is not available and that no drivers are loaded to the printer.  I know that I need drivers, but continuous HP told me no printer is installed and custom install drivers for it.  Help, please

  Dan

  Hello

  Thanks for the comments.

  Are able to disable the firewall during installation?

  Here are some troubleshooting wireless;
  
  Troubleshoot wireless
  1. make sure that the printer is not connected to the network via an Ethernet cable
  Wireless does not work if the printer is connected to the network via an Ethernet cable. Unplug it
  Ethernet cable from the printer.
  1. make sure that the wireless light is on
  If the blue light on the printer control panel is not lit, wireless can be disabled. To turn on the radio, touch
  or drag to the bottom of the tab at the top of a screen to open the dashboard, and then tap (wireless), touch
  (Settings). Tap Settings wireless and then tap wireless to activate it.
  If the blue wireless light is flashing, it means that the printer is not connected to a network. Use the wireless configuration
  Wizard available from the Control Panel printer to establish a wireless connection. Touch or drag to the bottom of the tab to
  the top of a screen to open the dashboard and then tap (wireless), press (settings). Touch wireless
  Settings, tap the wireless configuration wizard, and then follow the instructions on the screen.
  1. make sure that the computer or mobile device is connected to the wireless network
  Make sure that your computer or mobile device is connected to your wireless network. If you cannot connect the
  computer on the network, contact the person who set up your network or the router manufacturer. It could be
  be a hardware problem with the router or computer.
  1. reboot the wireless network components
  Turn off the router and the printer and then turn them back on in this order: router first, and then click Printers.
  Sometimes, disabling devices and then turn their back on helping solve the problems of network communication.
  If you still can not connect, turn off the router, the printer and the computer and then turn them back on in this
  order: router first, then printer and computer
  
  Still problems? Visit the HP (www.hp.com/go/wirelessprinting) wireless printing Center. This Web site
  contains more complete information and up to date on wireless printing, as well as information to help you
  Prepare your wireless network; solve problems when connecting the printer to the wireless network. and solve
  problems of security software.
  Note: If you use a computer running Windows, you can use the tool HP Print and Scan doctor, which can help
  solve many problems, you may have with the printer. To download this tool, visit www.hp.com/go/tools.
  
  Hope that helps.

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet 6835: Problem OXC19a0020 Code

  Problem code for my printer OfficeJet Pro 6835 "There is a problem with the printhead" OXc19a0020.  Tried to clean the head - no change. Equip new ink cartridges (HP) - no change

  You already have the solutiosn presented on this page?

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6830-e-all-in-one-printer-series/5390307/document/c03081973/

• HP OfficeJet 4550 problem on WINDOWS 8

  I just upgraded my desktop computer for Windows 8 and boredom become my HP Officejet j4550 to work.  I have gone through all of the uninstall and install troubleshooting instructions so many times that I must meet the definition of crazy at this point.  The printer was working fine before I upgraded so I think that there is something on the installation of new drivers which is problematic.  Some forums are useful in that they push me a different direction that I can try.  Before I waste any more time on this, I want to make sure I have a good plan and a few questions.

  Question 1: I have my CD and it won't work.  It seems that I need to change the setting on my software and I can follow the instructions on this forum for the CD to run automatically but wonder if it's essential to get printing to work.  I fear that using a CD that was produced before the release of Windows 8 would be problematic.

  Question 2: Is it better to download 32-bit or the 64-bit version.   I have a 64-bit computer and have been software download for 64 bit.  However, when I upgraded my Microsoft Office suite, suggested Microsoft get the 32-bit desktop software to avoid conflicts.  32-bit would be a good idea here, too?  If I downloaded 32 bit, the software would not work?

  Question 3: A single posted statement said to run the uninstall utility #4.  The link has only three utilities but the third proposed that runs the utility 4 times to completely remove the software.  Is the suggestion, i.e., run the utility 3 to 4 times, or is there another utility that is the appropriate to run.

  Question 4: The link includes a version for IT professionals only, but also the regular complete element.  The professional version of COMPUTING would not be better to download.

  Question 5: I have another HP printer and it seems to be running slow, but at least it works.  Is there a way to correct the 4500 without messing up the 4200?  I have two printer hooked to the same computer because I had so many problems with them, I twice also good chance of a job.  Maybe this isn't a good strategy and I should plug the 4200 to another computer.

  Thanks for any help you can provide on this.

  Since the installation troubleshooting has been blocked, I restarted the computer and it was restarted with the USB cable connected - just to see what would happen.  I checked the Device Manager to see if the 4550 has been installed and it has been.  I tested it on printing and scanning, and it worked.  So, something on your solution worked.  Thank you very much.

• scanning Officejet 5500 problem

  I have an Officejet 5500 and Win 7, 64 bit.  I do not fax mode. All this worked fine until yesterday.  I can print, scan and of the internet, but now when I want to scan to computer I get a message - "No. Scan Option, you need to install or run HP software for the feature. I ran the HP scan utilities and he said that there is a problem with the HP Scanner Twain. I uninstalled the JO 5500 program and then reinstalled and I still have the same problem. Somewhere, he says that maybe it's not a software problem, but a mechanical problem. Can anyone help?

  Hello again,

  I went to the page "Windows 7 update unable to install the driver." I don't know how I landed on this page, but I followed the instructions to the letter, and I think that it solve my problem.

  Thanks for all the help.

  Tom aka dog777.

• HP Officejet 6600: problem with the printer or ink system

  I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

  Hey @popcorn101,

  Welcome to the Forums of HP Support!

  I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

  I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

  HP technical support are available by clicking on the following link:

  Contact HP support

  (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

  (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

  (3) Once finished, click on the 'Show the Options' icon in the lower right.

  (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

  I wish you good luck going forward with this!

• OfficeJet 8620: Problem with HP Officejet 8620 and 8610

  Hello, this morning when we arrived in the office, we notice our officejet 4 8620 and 2 of our 8610 had lights flashing, attached are images of what we are seeing. With the network cable connected, the problem doesn't happen, as soon as plug us the network cable into the error occurs.

  Problem solved. A Blackjack Cube NVR was the cause for the errors listed above.

• color printing with hp officejet 6500 problem has more

  Unable to get the printer (hp officejet 6500 a plus) to print in color.  Impossible to copy in color

  Hello

  ·         What exactly happen when printing?

  ·         Were you able to print earlier?

  ·         Have you checked the color cartridge to check if it is empty?

  You can view the following items and check that it works.

  Printed colors may not match the colors on the screen

  http://support.Microsoft.com/kb/282897

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Let us know if that helps.