Pavilion 500-023w: BIOS

Similar Questions

• Looking for a block of POWER 500 ~ 550W that fits HP pavilion 500-023w desktop

  I bought a Dynex 520w ATX PSU for HP pavilion 500-023w.  This power supply is about 1.5 cm longer than the original and just, it does not in my computer.  It is too big.

  Previously, I had Thermaltake TR2 430w PSU.  This is of same size as the original power supply. But it won't last even 3 months. IDK, maybe it's not enough for geforce 2 650.

  I'm looking for a PSU that adapts to the 500-023w Pavilion and able to run 650 geforce.

  Please can someone recommend some PSU?

  After watching the dynex 520was reference, it is noted that it is the depth 6.3 "on this case. What you asked has a power supply with only 5.5 "deep. These meet your requirement.

  Rosewill 530W or 630W, as these two are depth 5.5 ".

  No OCZ in the range of 500W which is depth 5.5 "

  Corsair 500w 5.5 "depth, the Corsair CX600 might be a good choice, but it is sold out at this time.

  Any of these will provide a GTX 650 card needs. I love the Rosewill 630W. It will draw only what suits him.

• HP pavilion 500-023w (installing windows 7 questions)

  I just bouth HP pavilion 500-023w desktop PC recently.  It was pre installed windows 8. I tried to install windows 7. Finally, I installed windows 7 but I need the software drivers for my "HP pavilion 500-023w.

  I tried to download HP Web sites, but these drives only work for windows 8.

  So he will be busy if someone can give me the software drivers links that works perfectly on windows 7 for my "HP Pavilion 500-023w".

  Faisal

  Hello

  No, now, try this:

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56998.exe

  Kind regards.

• Pavilion 500-108es: problem with HP Pavilion 500 - 108es BIOS? password

  Hello

  We have a HP Pavilion 500-108es provided with

  This screen. "Enter the password for start" would be the translation. Guy said he didn t wrote a password in the BIOS and swear by himself, it seems.

  I tried to remove the CMOS battery, change, a clear CMOS, etc... but nothing has worked.

  ¿Any idea?

  Thank you!

  Hello:

  For your desktop PC, you need to move some jumpers to clear the BIOS password.

  Please see the link below... Erase password settings.

  http://support.HP.com/us-en/product/HP-Pavilion-500-100-desktop-PC-series/5395585/model/6559295/document/c03757575/

  Important: The instructions as you see them on the Web page are not quite correct.

  I modified the instructions below...

  To clear the password BIOS follow these steps:

• Pavilion 500-164: bios update - no option to update

  Fan CPU and PC failure would not start unless the message "Fan failure. Fan has been replaced, but now always make mistake on blue screen BSOD, which reads "WHEA_UNCORRECTABLE_ERROR" and sometimes other errors. Windows tries to start in recovery but BSOD over and over again.

  What I tried:

  (1) reset BIOS default. DONE - behavior even after resetting to BIOS defaults.

  (2) I tried booting from USB drives (several) using the tools of recovery of Linux (Ubuntu Live, Kaspersky, etc.). KERNEL PANIC, etc..

  (3) downloaded BIOS update HP and created update BIOS USB. Restarted with USB (I turned off safe boot, etc. to allow booting USB.) - NOTHING. I tried the two BIOS to run untouched and by going into the BIOS options (by pressing ESC @ boot upward) - none of the options anywhere to read/set the BIOS updated.

  According to a doc Support HP, I tried updating the BIOS of w / in "HP PC Hardware Diagnostics UEFI. The version on this PC is 5.2.2.0 version: I see no option to update UEFI (Flash BIOS). Options like suites: information system, system, testing of components, Test Logs, language Tests, exit.

  What I'm trying next, please?

  BIOS: JA2 v80.35

  CPU: AMD A8-6500

  RAM: 8 GB memory DDR3, DIMM single into the Groove 4.

  NOTE: The system came w / RAM into the Groove 4. Only POST is it RAM DIMM in the location #1. Is this normal?

  Thanks for nothing, Support HP...

• Pavilion 500-110ej: BIOS not shown on the screen

  When I turn on my pc it starts directly at windows and does not show the BIOS/post where I could click f10 or something and niether, it shows the HP logo.

  When I hit the spam button f10, the screen remains black and white, my guess is that he entered the BIOS, but there is no display.

  I'd appreciate any help as soon as possible

  Thanks I solved it just took out the CMOS battery and press the power one button a couple of times and came back

• HP pavilion 500-297C: hp pavilion 500-297c bios update

  HP support system indicates that I have an important update "HP consumer desktop PCBIOS (family ROM SSID 2AF7) this package provides an update of BIOS of HP consumer (2AF7 ROMA family) desktop PC for the supported models running a supported operating system.

  "SoftPaq number: SP7148 Version: 80.20Ap1 size: 10,74 MB download and install selected updates.

  When I hit download and install, it shows that it install and then it restarts. But when he comes back, in the HP Support Assistant distillers of shows, it must be downloaded and installed.

  Thanks for all you tips, finely, I got in touch with HP and the technical advisor advised me not to use the new update.  There is no role on windows 8.1 and it could cause my system to not work properely.  They then said, is there anything else we can do to help you?  My answer was yes ' Please don't sent me updates that I can't use.

  again for all your advice.

• HP Pavilion 500-023W: WHERE to find the product key on the computer

  Where can I find the product key on the computer. I already looked at the exterior, Interior and for a disc.  The computer came preloaded with Windows 8.

  Hello
   
  The key is in the BIOS of your machine, please use the following tool to get:
  
     http://www.Belarc.com/free_download.html
  
  When running this tool, it produced a report, scroll to the section of software management. Product key Windows 8 or 8.1 is there.
  
  You can also use the following tool to discover:
  
    https://www.magicaljellybean.com/KeyFinder/
  
  Kind regards

• HP Pavilion 500 023w: BIOHD -.

  I was everywhere except in the right place, looking for the solution. I read a lot of cases that are the same but no suggestion that work! Is there any help out there?

  I think you're right and I should trash the drive. As a test I put it up to clone the drive. I used a good working computer thinking I'll clone from a player well known to those in question. Guess what!  The test did not clone to disc. Since that was the case he told me that the drive is history. While I was there I cloned the drive well known to an SSD with the same configuration and everything worked fine!

• HP Pavilion 500-023w desktop: Hp pavilion 500-023w can run this card EVGA GTX 750 Ti SC (compatibility?)

  Hello very good day my question is if my pc is compatible with this card EVGA GTX 750 Ti SC

  I want to ensure before making the purchase

  PC

  Intel Core i3-3240 CPU @ 3.40 GHz

  Foxconn
  Model 2ADA

  Ivy Bridge chipset

  PCI Express x 16 Slot

  8.00 GB of RAM DDR3 @ 798 MHz

  Integrated Intel HD graphics

  10 64-bit Windows Home

  Marc, welcome to the forum.

  Yes, I think that your motherboard should be compatible with the video card.  The card requires UEFI in the motherboard and your mother should have.  Just be aware that the specifications concerning the State of the map that it requires only a power supply (PSU) with 300W power.  Many members have reported that it is rather 400W.  You can try with the current POWER supply, but if this does not work I suggest one made by Corsair.  I recommend at least 500W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion 500-369: prob inherited from the bios!

  I just install a new video card in my hp Pavilion 500-369 its r7 sapphire radeon 265 and a 600watts power when I turned on it beeps 6 times... and I tried all sorts of tricks to youtube... tried to change my bios in legacy mode but I can't find it... plss help

  More recent versions of the UEFI suport Sapphire cards if it is stated in the specs on the website of the company. Perhaps you should consider returning and its replacement by a new PCIe card.

  Here is the list of specifications to Sapphire in the link below. Notice that most of the R9 series supports UEFI. There is no map of R7 series made my Sapphire Tech who take care of UEFI.

  http://www.sapphiretech.com/presentation/product/?CID=1 & gid = 3 & SGID = 1227 & pid = 0 & PSN = 000101 & lid = 1 & leg = 0

  The r7 Radeon 240 by Club3D, r7 Visiontek 250 FF, PowerColor R7 250 2 GB GDDR5 Eyefinity 4 LP Edition (UEFI) all supports UEFI.

• HP Pavilion 500-141ea: which recommended update BIOS to use?

  I have desktop PC HP Pavilion 500-141ea, bought 2014.03.27 not produce. D7D35EA #ABU.

  Manu of motherboard: MSI, model: 2AE0 (P0). Current BIOS is what FRIEND 80.35 dated the 2013.07.10

  Win 10 (64-bit)

  Online support suggests that this office should be updated to versions...

  (1) update BIOS of desktop PC for the consumer HP Rev.A 80.52 (SSID family ROM 2AE0) 5.1 MB 12 November 2015

  (2) HP Desktop system BIOS Update for the models of PC PC 2013 HP Pavilion 500 - axx (with a ROMA 2AE0 family) 80,51 Rev.A 2.9 MB November 4, 2015

  How will I know that I should use?

  Greetings,

  80.52 is the last and will include the previous update revisions.

  Download the update manually. Do not use the HPSA.

  See you soon!

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• Pavilion 500-150: HP Bios Lock-Down?

  Hi all

  So I was looking for forums and thought that I had asked here: so we got a new machine and the kids want to play games, but some games do not allow internal graphics. I want to install a graphics card but do not know if it will allow the motherboard (Bios). It has a PCI slot for one but don't want to buy and install have the fans turn but have the Bios block.

  I have the power supply to upgrade the installed plant. I intend to buy XFX Radeon R7 240 2 GB DDR3 PCIe 3.0x16, video Cardinal any who think that a time I unstall drivers for the graphics of the plant and install new drivers, Bios it hangs in? Thanks in advance.

  Joseph

  Hi _driver51,

  I can not find the product for your model specification, are you sure it's 500-150? or it's 550-150.

  I can suggest you only focus on the speed of PCIe, the BIOS is not a problem when changing the graphics card, but you must make sure that your motherboard has the correct port for the graphics card. In this case, chetanrao_tech GeForce GTX645 sugested that is PCIe 3.0 x. Looking for a Radeon R7 240, which is also PCIe 3.0 x.

  I was looking for your model and I found 2 options:

  • The closest is the Pavilion 500-164, it supports the PCIe 2.0 x and the before mentioned graphics cards are * NO * supported, be careful.
  • The other model near your is the Pavilion 550-150, this one has a PCIe 3.0 connector x available. and previously the two mentioned graphics cards are supported completely.

  Can you take a look at your model number again just to be sure it was OK?

• How to clear the BIOS on an HP Pavilion 500-214ed

  Hi all

  in a Flash of genius unprecedented I accidentally disabled all the USB ports on my Pavilion 500-214ed. Which now leaves me with a useless system, since both USB keyboard and mouse do not work. So I need to reset the BIOS to factory settings.

  I have found the ROM_RECOVERY (E16) jumper on the motherboard, which I guess is that I need to clear the BIOS, but I can't find a manual or something to let me know which jumper settings, I need.

  Can someone point me in the right direction?

  Thanks in advance

  Steve

  Hi, Steve:

  Normally, you can find that info on the motherboard plug page but it isn't here.

  Have you tried to unplug the PC and carefully remove the cmos battery room and pressing the power button to remove all residual power to the motherboard?

  If all goes well, remove the cmos battery will also clear the BIOS settings.

  But if you look at the motherboard first, there are no jumpers labelled CMOS and password?