HP PAVILION 700 C SERIES - STARTS DO NOT

Similar Questions

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• Missing drivers for Pavilion 700-109 c

  I bought new Pavilion 700-109 c and do not wish to use Windows 8, who have installed Windows 7. In the process, some pilots have been lost. I still can't find these, as I don't know what they are looking for, or where:

  Network controller

  BCM20702A0

  Thanks for the help!

  Hello:

  Try these drivers...

  Bluetooth:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS029104

  ... Wireless unzip and manually install the first driver listed under the wireless section.

  http://www.ASUS.com/Networking/PCEAC66/#support_Download_30

• DESKTOP HP 700-527C SERIES WILL NOT START AFTER A REBOOT WITH MY SEAGATE BACKUP MORE 4TO CONNECTED TO USB 3.0 OR 2.0

  WHEN I CONNECT MY EXTERNAL HARD DRIVE BACKUP 4 TB OF SEAGATE MORE SACT4000600, HE NOT ONLY RE-START THE COMPUTER. IT SEEMS TO BE

  TRY TO RESTART ON THE SEAGATE, NOT THE INTERNAL HARD DRIVE. MY COMPUTER IS A HP-700-527 C, RUNS THE WINDOWS 7, THE INTERNET EXPLORER BROWSER. MY ERROR MESSAGE SAYS "NO BOOT DISK OR DISK IS DAMAGED." I JUST INSTALLED CMS BOUNCEBACK ULTIMATE, WEBROOT AND MICROSOFT OFFICE PRO AND VISIO.

  I FIRST SET UP THE FIRST COMPUTER AND RECEIVED THIS MSG ON RESTART AFTER THE DISKS HAVE BEEN INSTALLED FOR BOUNCEBACK AND SEAGATE. THOUGHT IT WAS A PROBLEM OF HP, NO LUCK WITH THEIR HELP. MICROSOFT IS NO HELP. A COMPUTER HELD THE GEEKSQUAD AFTER THEY WENT THROUGH IT REMOTELY AT HOME, THEY COULD NOT MAKE CHANGES TO THE BIOS REMOTELY. BIOS IS BELIEVED TO BE IN THE WRONG ORDER TO RE-BOOT. THEY COULDN'T GET IT TO STOP TRYING TO RESTART ON THE SEAGATE, EVEN WHEN THE BIOS FOR THE REST HAS BEEN DISABLED.

  ONLY THING ON IN THE BIOS WAS THE C: / DRIVE. BUT, WITH IT UNPLUGGED IT WOULD RESTART WITH THE BIOS ALWAYS POWER OFF TO EVERYTHING ELSE? WE PLUGGED ON THE 3.0 AND VERSION 2.0. SO, I TOOK THE COMPUTER BACK THINKING IT WAS HER, EVEN A NOVELTY. AT EXTERNAL BACK SAME THING. SAME THING ON THE NEW COMPUTER AND THE NEW HARD DRIVE! .... SEEMS TO ME A HARDWARE PROBLEM? BETWEEN SEAGATE USB 2.0 AND USB 3.0 PORTS?

  IF THE BIOS EVERYTHING IS OFF, THEN WHY HE WOULD ATTEMPT TO BOOT UP OUT OF SOMETHING THAT DOES NOT EXIST IN THE BIOS IT IS! ... MEETS EVERYONE. I HAVE A SMALL PORTABLE 1 TB SEAGATE, IT WORKS PERFECTLY IN USB 2.0 NOT IN 3.0, COOL, MY DIGITAL WEST ON USB 2.0 BUT NOT USB 3.0 ŒUVRES. MY COMPUTER WON'T BOOT UP OFF OF THEM. SITTING AT THE DRAWING BOARD! ??? !!! ....

  Hello
  Thanks for posting your query on the Microsoft Community.

  As you mentioned that your HP desktop computer is not able to start after a reboot.

  I would first disconnect the backup / external drive and check if you are able to start or not.

  I suggest to go to the BIOS and boot sequence and select the internal hard drive as first boot device.

  NOTE: BIOS change / complementary Metal Oxide Semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Setting changes are made at your own risk.

  If the problem persists. I suggest that get you in touch with HP support in order to solve this problem.

  See the link below.
  http://support.HP.com/us-en

  Please let us know if you face the future with other problems with windows. We will be happy to help you further.

• Pavilion dv6 Notebook: laptop still does not start if equipped upward of battery

  Pavilion dv6 daughter Notebook always primer not beyond the screen HP enrobeur battery if

  Product number: WR498EA #ABU
  Serial number: [personal information deleted]

  Operating system: Windows 7

  Hello @HPNovice1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your notebook always primer if if mounted battery and I'd love to help you in this case!

  Since you have already calibrated and tested the battery, I suggest following the steps below re - install the battery method compatible ACPI Microsoft control:

  Step 1. Go to the Device Manager
  Step 2. Select the stacks
  Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 4. Click on uninstall
  Step 5. At the command prompt, put a checkmark in the box to remove the current driver
  Step 6. Shut down the computer
  Step 7: Remove the battery for a minute and then put new

  When the computer returns to the top it should automatically find the driver.

  Step 8. Go to the Device Manager
  Step 9. Select the stacks
  Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 11. Click "automatically search for an updated driver.

  Do the same thing with embedded controller compatible ACPI Microsoft.

  In addition, I also recommend you to restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.

• HP / Compaq Pavilion Notebook PC series, hp printer connection g6

  HP / Compaq Pavilion Notebook PC series, windows 8.1 g6

  I tried to install my printer hp B110a to the laptop, but it was not possible. I tried to look it up in the topic my devices, but it never came. I don't understand why I'm unable to print from a computer with an hp printer hp laptop.

  Any help would be appreciated.

  Hello Eenigmaa. Thanks for posting on the HP Forums. I understand that your computer has problems during the installation of your printer. To make sure that you follow the correct process, please follow the instructions of this HP website: How to install and download software HP printer and drivers

  If you experience an error during the installation of software, please provide the full error message / code. Otherwise, I hope this helps you. I'm only here to help!

  Mario

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• No HARD disk detected desktop Pavilion 500 PC series

  Hello

  I have a desktop HP Pavilion 500 PC series

  Serial No.:

  Prod #: H5Q30AA #ABA

  Model #: 500-016

  When I start the PC I get the error "No Boot Disk Found".  Sometimes, I get the 'start Recovery', but then the computer system hangs indefinitely.

  How can I order a new HARD drive or recovery discs so that I can burn a new image on an existing (new) HDD?

  I tried to call support, but they wanted $$ just to troubleshoot the problem.

  I'm pretty savy to replace the drive or burn a new computer image.  Can someone tell me how I can order the necessary drive or the discs?

  Thank you

  Jim

  Thank you.

  I was able to order the recovery disks.  It's a shame phone support staff comes to tell me this at the beginning.

  I am considering this case "closed".

  Thank you

  Jim

• Taskbar, menu icon and start start will not appear

  I apologize if I chose the wrong forum for this.    HP Pavilion P6610f Windows 7 family Ed Office.  Internet Wi - Fi of 64-bit (Qwest DSL) middle of experience in technical (I think).  Windows Defender No Windows Live Security Essentials yet, (oops!)  When I signed out of AOL and returned to my desktop, the taskbar, start icon and menu start would not appear.  I tried CTRL + ALT DELETE, to try to find out if a program is interfering, (nothing was running) could not arrested except to do it manually, so I did and pressed conitnually f8 when starting upwards.  I tried 'last best configuration' (did not help) went to HP Support Assistant, ((Heureusement, la barre de HP advisor était en haut de mon écran de bureau) I tried all diagnostic & troubleshooting steps HP Support Assistant.) When I tried to go to Windows Explorer from there, or attempted to open the configuration of my system, he kept saying that the (HAPSLC) (or something close) leave work and he wanted to know why, but never did. I tried it 4 times.  I was hoping to reset back a few days but could not find a way to access this page. Scared to try something else. I did a factory reset on September 1, 2012. Have a record of system repair that was made in may 2012. I think that Windows was the installation of the updates at the time wherever I discovered that these things were not working.  You have any advice would be greatly appreciated. Thanks in advance for your time.

  Hello TY965,

  Even after a restart, the start menu and task bar not come back?

  Try these steps and let me know the results

  1. launch the Ctrl + Shift + ESC Task Manager

  2. under find explorer.exe processes

  3 Select this option and complete the process

  4. then go to file, and select new task

  5. type Explorer.exe and press OK

  Observe the behavior and see if the task bar and menu start back

• HP Pavilion Slimline S5000 series what proccessors are compatible with this desktop computer

  HP Pavilion Slimline s5000 series

  MS Windows 7 Home Premium 64 - bit SP1

  PEGATRON CORPORATION NARRA5 (Socket AM2)

  basically the research to upgrade this computer, but seeks a proccessor with certain powers to him.

  seen things here and there about am2 slots to use am3 proccesors with a bios upgrade and this and that.

  I just want to know if any am2 + / am3 processors will work with this computer.

  I could find only a proccessor am2 but I do not trust any other sites then amd itself wich doesn't am2 processors do more

  Newegg wich ofc cannot sell what is not done more

  and tigerdirect which is the same case.

  If only I had the money to buy a pc with a new am3 motherboard. \

  Hello

  Here are the specifications of your PC (s5623w).

  In theory, these processors AMD Socket AM2 + rated 95 watts should work. I would stay away from the 'B' models

  Find out what the return policy is before you buy.

• 1400-503 problem start will not start

  Hello. I have a problem at startup. When I
  Press power, switches on the control and the fan starts but nothing happens: the start does not start, no HARD drive. It started two weeks ago. After trying three - five times the normal boot sequence has started.
  Now it won't start at all, with one exception: If the computer is cold (after a few hours in the cold car and (no joke) after a while in the fridge).
  Does anyone have an idea what causes this, and if the repair is expensive.

  Hi diederick

  In my opinion it s an overheating problem. You should check the cooling modules and try to clean it up. The right tool is a vacuum cleaner.
  If this problem persists if you contact Toshiba service to check the laptop.

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Pavilion g7-2201sd windows 8 ends not configure updates

  My HP Pavilion G7 2201sd / Windows 8 ends not configure windows updates, it gets stuck on 12%, no error message. A few times a week the laptop wants to update, but does not then complete it. Anyone know what is the cause of this and how do I solve this problem?

  See this topic.

• Pavilion P6000: Windows Word starter

  I upgraded to Windows 10 and lost the word progam starter and not able to open any existing file.  I didn't like Windows 10 when even then I reinstalled Windows 7.  I still can't use starting Word. I uninstalled Microsoft office 2010 starter (is it the same thing?) as suggested, but now I can't reinstall it.  When I put them to the top of the desktop window there is no box that says use office starter.  Help, please.

  Thank you for your answer, but it seems that there is no solution for my problem.