HP Pavilion Desktop family vista premium sp2, lost whole Update window. Recovery of the aid.

Similar Questions

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• "Family Vista premium sp2 installed and now printer will not print.__Error message, ' Page too complex" and blank page "print."

  MS installed sp2 on my computer.

  Now, HP Color LaserJet 2840 all-in-one printer, connection direct usb does not print word documents.

  HP printer displays "Page too complex" and prints a blank page.

  USB connected to the printer is established, proven and fully functional until installed sp2.

  I have...
  computer restarted, then tried
  have disconnected and reconnected printer 110 AC, then,.
  printer unplugged 110 AC and USB, computer connection, rebooted, then,.
  removed from all printers in the control panel and the computer restarted, the printer is displayed as connected, but,.

  Always get the error message "Page too complex" and printed white page.

  Help, please.

  Hi livelabel,.

  Please use the forum for answers,

  You can uninstall all the driver/software HP printer utilities.  Visit the HP Web site for the last download driver and utility, reinstall them after rebooting your system.
  Also contact HP any known issue with SP2 for your printer model.  Make sure that file for the print job size is not greater than the printer can handle.

  Let us know if this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Family Vista premium must reinstall.

  My family vista premium OS needs to be charged and I don't know how to do this on the internet without having to pay for a new. How can I download and use my old key?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Original title: Edition Vista Home premium

  Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Hello

  Home editions of Vista have not included Fax software.

  Fax only comes with Vista business, full and firm.

  http://Windows.Microsoft.com/is-is/Windows-Vista/send-a-fax

  It is a salary for a Fax program.

  http://www.SnapFiles.com/get/snappyfax.html

  See you soon.

• cannot burn two readers do not recognize the blank cdr - family vista premium

  cannot burn the two deives do not recognize Virgin cdr - family vista premium

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• my computer has a virus. I took it to get the virus removed and now I don't have my family vista premium there Home Basic

  my computer has a bad virus and I had cleaned it but now my family vista premium is not on that but Home Basic is. I tried to activate with the numbers on the side of my computer, but he says that's not good. His NY will not come on either. I went to the trouble and he told me to plug my speakers that have been connected

  Hello

  Take it back to the one who fixed it and demand that they fix it correctly by reinstalling correct Vista edition. namely Vista Home Premium;

  _____________________________________________________

  We cannot help you help to activate the version of vista evil with your home premium product key

  It will not work

  _______________________________________________________

  If you have no luck with the one who fixed it, you need to reinstall vista Home premium yourself or contact a computer technician known to do

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Vista 64 SP2: when you run windows update, trustedinstaller takes 100% of one of the drivers for more than 20 minutes

  I recently bought a new computer, when I run Windows Update there is a process called TrustedInstaller.exe, taking 100% of one of the cores for a very long time (> 20 minutes).

  I have vista 64 SP2 and all updates installed (took me over 3 days to complete).

  Also, when I try to install additional features of windows (for example. IIS) the same thing happens, trusteinstaller takes 100% of the base and install new features forever.

  I have not installed additional software so far is very little probable that a virus or spyware is the cause. When I'm not updating the an or install features of windows, the computer running quickly and the cpu load is not high at all.

  How long was the computer connected to the internet before you installed Avast?

  Can update you Avast manually?

  The above, see if a reset fixes the problem:

  How to reset the Windows Update components?
  [Access KB971058 Internet Explore 32-bit only; [Throws the difficulty in DEFAULT and AGGRESSIVE modes, and then restart & test]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• license for windows family vista premium 64-bit, but need to copy

  I have the license for windows vista Home premium 64-bit.  I had to replace the motherboard in my pc.
  so I had to reinstall windows, but only had a copy of windows xp from an old computer.
  what I have to buy a new copy of windows vista?

  Hello

  If vista is preinstalled, motherboards change should be done in conjunction with the manufcacturer of the computer

  preinstalled OEM licenses are tired to the original material on which they are installed

  the license dies when the computer dies

  If a retail license, you can change morherboards

  borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Setup of Windows, windows vista premium sp2, loop guard coming dialog box

  Does a not install office 2007 compatibility and a .net 3 or something like that.  A box of Windows Installer keeps coming back. I can cancel it, but it is immediately. Brings my system to a crawl. I tried to uninstall the updates they will not uninstall.  I tried to download and install manually, says I do not have components that require this update, I have more Office 2007 on my system.  Help

  Hello

  Go into control panel - Windows updates, click right on and HIDE these updates, so they will not try to install
  After you do the below. Then you can VIEW those that you need later and install.

  --------------------------------------------------------

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  This is to stop the loop of the installation if the above does not work.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Top desktop PC. OS: Vista Ultimate sp2. Error code "Windows can't check new updates" message "800f080d".

  I tried all of the suggestions for help with this error! Still no relief. Please notify. Thank you, in advance,

  Moe723

  Hello

  1. have you plugged all third-party devices other than the keyboard and mouse?

  2 have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and check if that helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Run the system update readiness tool and check if that helps.

  Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/?kbid=947821

  Method 3:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  And also disconnected all external devices except the mouse and keyboard and then try to check for the updates.

  Hope the information is useful.

• need to download a family vista premium 64 clean install iso

  Gateway me screwed arounf for 6 months with oh itll be there in three days, two weeks, 11 and a half days, 6 months. When I finallly get the installation disc, it dosnt work... I am running a version of win 7 32 bit, I'm looking at the 1st stop

  1.) implemented a system dual boot.

  2.) install vista on a partition

  iwipe 3) 32 bit win 7 and put to upgrade to 64 - bit

  I have pro tools 8 and its ti really supposed to work on vista, so I want a system dual boot, and I'll be able to share data between systems and or switch back if necessary?

  I'll do it but a microsoft installation disk if absolutely nessasary, I prefer download and burn if. but I refuse to the gateway to give a penny more

  HII

  borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Family Vista premium missing windows media player 64-bit

  Hello.. .fondamentalement the title says it all.   I'm in Europe and bought the English version of vista HP 64-bit. (integrated home system)

  I want to install what my favorite site who subscribe to allows me to listen to live games and then what highlights.

  But in IE 8 32-bit I get an error (works on IE8 64-bit for any reason and on firefox)... and on 64-bit windows system 7.

  the error code is:

  An error occurred trying to read this content.

  Error code: C00D1197 OR 0xC00D1197
  Error number:-1072885353
  Error description: Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

  For more information, see Microsoft troubleshooting Page.

  Thanks for the links to d/l the WMP 64 bit (I sen a player 64 bit but it was for XP)

  other than this WMP 11 works very well... just thought I would try the 64 bit version and see if that makes a difference.

  Hello GrimREMA,

  This means a file has been moved, renamed, or deleted.  The file is possibly corrupted.

  In Windows Media Player 11, you can choose 'options' on the 'Library' tab then
  Select the network? This tab is opened?

  See the article below:

  Article number: 940029 - error message when you try to use Windows Media Player to stream
  audio or video Windows Media Services: "the specified protocol is not.
  supported"
  http://support.Microsoft.com/kb/940029
   
  Please answer back with an update.
   
  Marilyn

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here