HP pavilion dv4-2160us Xp blue screen on install

Similar Questions

• HP Pavilion Slimline s5298d had blue screen problem. Error: IRQL_NOT_LESS_OR_EQUAL (a).

  Hello!

  Can someone solve the blue screen of my PC problems?

  My PC always appear blue error screen especially whenever I stop PC.

  Error message: IRQL_NOT_LESS_OR_EQUAL (a).

  Arguments:
  Arg1: ffffffe5, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: 820d3a6a, address memory
  The blue screen issue can be caused by ntkrpamp.exe (nt! ExpScanGeneralLookasideList + 22)
  PC model: HP Pavilion Slimline s5298d
  Operating system: Windows 7 Home Premium 32-bit

  Hi once the device is powered keep tapping F2 button then start the hard drive & test control memory if a test fails, you will need to replace the part if test passes following the steps below. Then you can try the F8 key when the power is on and try the last known good configuration. If this does not work try start repair and try to repair the unit. If these options above does not work you can try to do a system recovery restore or F11 before this please back up your data as it will be lost.

• HP Pavilion DV4-2045DX at startup screen 'black '.

  My HP Pavilion DV4 at startup screen 'black '. It normally happens with all audio prompts password and subsequently entry, audio acceptance... password screen but 'black '. This problem is intermittent, but happens on a basis more common. Any suggestions would be greatly appreciated.   Peace

  Screen is black from the beginning. Hooked up a monitor to laptop and everything's fine. Appears to be a screen, a problem of connection or link screen. Thanks for the input.    Peace

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• HP Pavilion Elite m9280a PC, blue screen now won't start!

  Hello

  My pc does not now start upward. It worked fine until the other day when I got a blue screen STOP error. Before that I could write the code that the computer tried to restart. It won't have the option to go in safe mode now, the hard drive light flashes on the front just once when you turn then just sits there, white light, solid screen. I am running Vista.

  Any help would be awsome as I am Flexi-rent this pc and do not want to pay for a computer I can't use even turned off!

  Thank you

  Pat

  P.S. I had a Vista disk when I got the PC.

  Pat1982,

  You should always have a recovery hard disk partition.

  When you turn on the computer, press F11 repeatedly until the system recovery begins. For more information, read this:

  http://support.HP.com/us-en/document/c00814731

  If/when you get all of this done, you must create a set of recovery disks and then perform the steps described in this article, to avoid possible future problems:

  http://support.HP.com/us-en/document/c01676224

• Pavilion dv4-2160us: correct bios for Pavilion dv4-2160us

  I have serious overheating problems on my Pavilion dv4-260 and reading that updated the bios might help. I have version F0.b, but some sources said another version.  The HP site says nothing when I check the updates.  Can someone tell me what should be the current bios?

  Last version for your model is F.0F - the title of the list of drivers for Windows 7.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv4-2100-entertainment-notebook-PC-series/4074361/model/4125971#Z7_3054ICK0K8UDA0AQC11TA930O2

  I doubt that a BIOS update would solve the problems of overheating. An older office here suffers from overheating in Windows 10 and I think it is due to no AMD graphics driver to Win 10. The graphics card is old and not support for win 10 AMD. The driver using Microsoft base. No doubt will be back this machine to Windows 7.

• Pavilion dv6-6c35dx pc: blue screen

  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 116

  BCP1: FFFFFA800E8CA4E0

  BCP2: FFFFF880040EA80C

  BCP3: 0000000000000000

  BCP4: 0000000000000002

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x116_TdrBCR:2_Tdr:2_IMAGE_atikmpag.sys

  Information about the server: b7f2e454-d92c-48c6-ba83-03e834fc7c9c

  Hi @garciagm

  Welcome to the HP support community! I see that you get a blue screen or a blue screen of death (BSOD) as it is known. Try reinstalling your driver AMD HD graphics and let me know how it goes.

• I get a blue screen after installing windows7

  I have intermittent blue screen of death after installing windows7 home premium on Pavilion m9040n. Can anyone help?

  It is indeed a clean install of windows 7. Thanks for the reply, I solved the problem. The problem is I have a Hauppauge winTV TV tuner card is installed and cela mucks the other pilots on this installation. Everything went well after I got rid of the TV card. It seems that hauppage isn't a suitable driver for their card and windows 7 install their WDM driver for him and it does not. When I try to use the TV card and not a few seconds later, I get a blue screen of death and fans try to work overtime for an unknown reason.

• Satellite A205-S5804 - blue screen after installing XP

  Hello.

  I tried to do it twice in vain both times. I have the XP disc and I used it on my desk before so it does not work. Installation is finished and after it is done XP load and there is this blue screen that appears as a fraction of a second and I'm unable to read and then restart the PC. Very frustrating.

  I'd like to really all the help that you can offer me. Toshiba customer service told me that this model only supports Windows VISTA, but there must be a way. Please help me.

  Moled number psaf3u-0nr00v

  Toshiba Satellite A205 - S5804

  Hey,.

  Do you also have problems with the Toshiba Recovery disk or the Windows XP disc?

  The problem is probably related to the drivers SATA may have installed XP correctly when you change the HARD drive in the BIOS from AHCI compatible?

• Blue screen when installing Win XP Pro on the Satellite A100-211

  Hi all.

  I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".

  I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.

  Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?

  Thank you very much in advance! I'm really really freak out with this
  Octavio.

  Hello

  Did you get this error message?
  "stop error 0x7E in Pci.sys".

  I found information on the Microsoft site that you need the latest Microsoft service pack.
  http://support.Microsoft.com/?kbid=839641

• Satellite P300D-12F shows blue screen by installing Win7

  Hello
  When I bought ths laptop, Windows Vista is already installed (32 bit Premium).

  Now, I bought Windows7 Prof I wanted to upgrade my system. But, is not possible. Because of the compatibility of professional and high quality of windows.
  That's why I have to install windows 7 from the beginning (New Installation, no upgrade)
  I tried to install the system

  The problem is that I always get blue screen windows

  What should I do? What is the reason for this problem?
  Thank you

  I installed Win7 on a friend's Satellite P300D month without problems.

  Here is my order of installations:
  Satellite P300D-13N and own Win7

  -win7
  -display driver
  -driver sound
  Driver LAN-
  -Supervisor password utility
  -card reader controller
  -WLAN driver
  -Infrared driver
  -Registry patch 1.2
  -Hardware configuration
  -Toshiba Assist (Vista)
  -VAP
  -ConfigFree
  touchpad driver-
  driver webcam-

  Before you begin installation remove all existing partitions and create a new partition and he chose to install Win7. That s all that I did.

• Satellite M100 PSMAOA - blue screen after installing Vista Bluetooh battery

  I recently did the Vista home premium upgrade on my Satellite M100 (model psmaoa). I installed the Vista drivers as well as by the site "Toshiba Australia and New Zealand", but when I go to install the battery Bluetooth Vista I have blue screen...

  Any help woul appreciated

  Hello

  You update the BIOS?
  On several sets of Toshiba, the update of the BIOS is necessary if you go from XP to Vista or Vista to XP.

  I'm not sure about the Toshiba notebooks for Australian but the European Satellite M100 supports a special BIOS in Vista.
  I recommend you to check this first.

  In addition, I recommend trying to install BT stack from this Toshiba BT Portal;
  http://APS2.toshiba-tro.de/Bluetooth/

  Bye and good luck

• Satellite P200-1BA: blue screen after installing Bluetooth (BT 7.1 stack)

  Hello

  I would like that you suggest me solving this problem. I installed Win 7 on my laptop TOSHIBA (satellite P200-1BA). and installed all necessary drivers downloaded from the official website. But only the bluetooth driver produces the problem. When I install it, first it appears driver installed successfully, my intention to restart. After rebooting once windows starts (desktop appears) all of a sudden blue screen and the computer restarts again and again with blue screen that appears until I have disable bluetooth.

  Anyone who encountered this problem too, or that someone has an idea on his reason?

  It's very strange. I've installed several times on different models with different operating systems and all went well.
  Are you sure you are using the 32-bit version for 32 bit OS?

  What operating system is preinstalled on your laptop?

• blue screen after installing the updated driver intel chipset

  I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

  Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.