HP Pavilion DV6 touchpad does not and now the keyboard doesn't work

Similar Questions

• updated Windows 10 and now the wifi doesn't work do not

  I have upgraded to Windows 10 now my Wifi does not work.

  I've updated the Wifi driver and still no luck, keep saying error unable to connect to this network.

  My laptop is a

  Ignore the router rebooted and now works ok

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• Pavilion dv6: laptop does not

  I was given a Hp pavilion Dv6 some time ago and I tried to run but I don't know what's wrong with him

  When I plug in the power ring lights and when I press the power button on the fan and other lights come on but the screen does not work. When I press Ctr alt delete it restarts and now the backlight of the screen lights up but nothing appears. When connected to an external monitor a cursor appears in the corner of the screen for a few seconds then disappears, I tried to put disc in there but I still nothing No bios or the empty start screen.

  Thanks in advance if you can help me!

• Pavilion dv6 Webcam does not?

  I have a Pavilion dv6-1030 ca laptop, and since a few weeks, I had trouble with my webcam. When I open the HP MediaSmart Webcam, I get the following error message: "no video device detected. Please connect a video device to your computer. If you are using a built-in camera, please make sure that it is turned on. "I have a built-in camera, and (usually) lights up when the webcam application opens. I am running Windows Vista with SP1 and tried many things to fix it, nothing helps. The webcam does not appear in the device, under imaging devices Manager, nor any of the Hubs USB root. So far I have tried:

  -Reinstalled the drivers of USB root hub

  -A tried to fix the solution in the BIOS (that another thread suggested)
  -A tried to use Recovery Manager to reinstall the driver (wasn't in the list)

  -The recovery disks created to solve the problem (it didn't)

  -Updated the MediaSmart Webcam software

  I'm at school right now, and I can't really afford to give my phone to obtain compensation for three weeks since I have exams coming. Any help would be appreciated! Thank you!

  Message edited by annabelle89 on 27/07/2009 20:30
  Message edited by annabelle89 on 27/07/2009 20:31

  Don't pay fees to repair overpriced... it happened to dv6 my boss, lift just the frame surrounding the top and sides.  You don't need a crowbar on the bottom of the frame.  Use your nails under the inside edge of the frame, they have adhesive tape double-sided, so it can be a little difficult to dislodge.  Lift slowly so that the band can separate on its own.  Don't force quickly or you could damage it.  Make sure you are not prying the metal frame silver of the LCD, only the black plastic frame.  There are hooks plastic that will make a click sound when you lift up the frame, it will need a strength, so don't be afraid if you hear the wink, he should be able to put it back together if you did it correctly, otherwise you will need to use some tape to tape the rear frame, better than paying $100 +... haha.  Once you have pryed on the top of the frame and have access to the webcam module, you should see the cable going into it from the bottom, push the cable into the webcam, then see if the problem is resolved, the cable most likely just came loose.  If that solved the problem, I suggest to use something you can remove, as hot glue to hold it together, just in case the webcam really needs to be replaced, you can melt the glue wide and swap out.

  If your microphone works very well and just the webcam does not work, then the problem is most likely a driver problem, or the webcam itself somehow has been damaged, which is highly unlikely.

• HP laptop Pavilion 13: Touchpad does not?

  My touchpad does not work. I don't know if it has been disabled, or if it's broken. Help please!

  Hello

  Try the following - plug the mouse usb cable when it is required.

  Hold down the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In the Device Manager window, expand mice and other pointing devices.

  Right click on the Synaptics device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, stop the laptop.

  Unplug everything device, including any usb mouse.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let windows take over completely for a few minutes before checking the function of the touchpad.

  Kind regards

  DP - K

• Pavilion dv6-2130ej does not recognize her webcam

  Hello

  Just bought this couple of weeks laptop back and now when I tried to use her webcam, it does not exist in the device (7 ultimate x 64) Manager and HP MediaSmart Webcam saied:

  "... If you use a built-in camera, please make sure that is enabled"

  Tried a BIOS update and the HP MediaSmart Webcam update successfully.

  My Ubuntu 10.04 Linux (Dual-Boot) does not recognize an imaging device aswell.

  If I need to send the computer in a lab I lose a week which is a major problem for me.

  What can I do? Can someone help me?

  THNX A LOT

  Drugmand

  Help someone?

  

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The mouse and the keyboard doesn't work do not after Windows 7 update

  I have Windows 7 Home Edition.  My CPU is the last Windows Update during the night, now the keyboard and the mouse do not work.  I rebooted and unplugged both several times.  I go back to my login screen, but I can't do anything from there.

  I prsume your keyboard is USB?  If you can find a friend who has an older keyboard with a PS/2 connector, you can try this, F8 again and select last last known good configuration.

  There is no updates yesterday in itself, because I have them on my PC (I hate the 2nd Tuesday of the month because I run around the House like a crazy woman by ensuring that 1 Vista 64-bit, 2 Server 2008 R2 64-bit, 2 Windows 7 32 bit and Windows 7 64 bit 4 are all downloading correctly and restart if necessary.) All keyboards and mice are works well here.

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• XJ437PA #ACJ: Pavilion DV6 - Audio does not

  Hello

  The audio has stopped working in my laptop since these days. It started with the audio does not not intermittently, but he has completely stopped working. I shared my PC specs below:

  Product name: HP Pavilion dv6 Notebook PC
  Product number: XJ437PA #ACJ

  Processor name: Intel (r) Core i3 CPU M 370 @ 2.40 GHz (2 400 MHz)

  I went through this forum and tried a few things:

  (1) to reinstall the codec IDT high definition

  (2) using the file available in the Recovery Manager

  (3) using the MicrosoftFixit

  But the problem is not yet solved.

  Can you please provide some suggestions?

  Thank you

  David

  Hi David,

  I would suggest you try a slight variation on the first two methods.
  
  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47393.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.

  Right-click on the Audio display Intel entry and select uninstall - this time check the confirmation box to remove the driver and continue the uninstall.

  Then, right-click on the IDT device and select uninstall - for this entry, also check the box confirmation to remove the driver and uninstalling.

  Once completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

  Any improvement?

  Best regards

  DP - K

• HP Pavilion DV6 6120us does not completely close

  My HP Pavilion DV6 6120us crashes during stop. Windows looks like it goes through the process of closing and the screen goes black but the border mouse pad remains on and wifi (f12) button goes orange. The only way to close it completely is to hold the power for a few seconds. Once I start it again, it said that Windows was not shut down properly. After a few days ago, now the laptop battery is not detected.

  I went into the BIOS and run the embedded memory test and hard drive, but both passed. I haven't done a reinstall of Windows, but the battery problem now I think it could be the motherboard, but I hope that it is something else, because it is out of warranty. I am running Windows 7 family SP1 64-bit edition.

  I've seen a few posts on this forum with the same symptoms, but it never seems to be solutions. Any help is appreciated.

  Hello @Rangor and @dottorepcdotcom,.

  I'm sorry to hear that you both have the same problem with your HP Pavilion dv6-6120us Entertainment Notebook PC computer to not stop correctly. I have things that you can try before you commit a material error.

  First of all, I would like to you follow the steps in the HP Support document: performing a hard reset or forced to reset.

  Secondly, I would like to try a stop with ALL USB devices disconnected from your computer.

  Thirdly, I would like to allow you to start your computer in Mode safe. You can do so by following the steps in the HP Support document: Windows 7 Safe Mode and once it is completely started to stop him. If it stops correctly we have driver problem and I would like you to use the HP support document: use of the Recovery Manager to restore the software and drivers (Windows 7) to load the original drivers supplied with your computer. Make sure that you start with the Chipset drivers and install ALL the drivers available. DO NOT RUN UPDATES! Now try to shut down your computer. If it still has the issue make sure that you now follow the steps in the HP Support document: using HP Support Assistant (Windows 7) and make sure that ALL the HP and Windows updates are done.

  Back, I would like you press F10 at startup and enter your BIOS. Once you are in the BIOS, press F9, which will save and quit with the default values.

  Fifth, I want to make sure that your BIOS is up to date. You can check your update of the BIOS on the HP Pavilion dv6-6120us Entertainment Notebook PC Drivers page.

  I hope these suggestions help to solve this problem for you. Thanks for posting on the HP Forums. Have a great day!

• HP Pavilion dv6-3103sa: HP Pavilion dv6-3103sa does not then illuminate that plugged

  Hi - my HP Pavilion dv6-3103sa has recently developed a fault.

  It lights up with the power cable connected to it.  So that the laptop starts I have to first remove the power cable.

  Similarly, before you turn off the laptop, I need to unplug the power cable.

  If I leave it plugged in and turn off the machine, I can't start at all. The solution is to remove the power cable and the battery, then replace the battery only and then turn on the machine.

  I also noticed that with the removed battery and the power cable is connected, the laptop does not start again.

  Watching the light next to the power cord plug when plugged in the cable it quickly flashes of white, to orange, then back - tell me no power isn't learning laptop in this State.

  I also tried a different power supply with the same intensity from a mobile phone of similar work with the same results.

  Please notify.

  @ScatchyMonkey,

  Hello and thanks for the display on the HP support forums.  The problem you are having is with the motherboard.  There is a part that regulates the power and allows the system to know if it is connected or not connected and if it failed, you will need to have it sent repair.  Here is the link that will help you communicate with the correct service.

  Contact HP support.

  Thanks again for posting and have a great day.

• HP Pavilion DV6 6c65ed: HP Pavilion DV6 6c65ed does not turn on

  Hey

  I have a HP laptop since 2012. A few days ago I turned on him and it freezes. IK it turned on again and after a few minutes, it is suddenly turned off.

  After that when I hit the power button some lights burnt, but nothing happened. When I plugged the charge light power adapter went white, orange and turns it off.

  After that I tried turning on a few times, and reconnect the AC adapter a few times nothing. No lights, no fans, no anything.

  Now, nothing is what you do with the laptop.

  Does anyone know how can I fix?

  PS. I tried a new battery.

  HI @JD14HP,

  Thank you for your answer and explaining the meaning of the battery.

  If you are unable to test the adapter.

  If the document on the test it has not determined or helped, please contact HP support for help.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck and have a great weekend!