HP Photosmart 735

My camera, I found at a yard sale, doesn't have a memory card.   I tried a 16 gb and now I tried a 2 GB SD.  I get the error message that the card cannot be formatted.   There are a few times that this message and I am able to use the camera and even transfer photos to my computer.   I use the right memory card?  I hope you can solve my problem - I like the photo.

Thank you

Irish2

Hello

Its Manual:

Memory card -Secure digital (SD) or MultiMediaCardTM (MMC) 128 MB is the largest card tested by HP.
Larger sizes of cards have not been tested, but they work - use at your own risk. This product only supports the
the use of MMC memory cards that have been verified according to the specification of MultiMediaCardTM from January 2000. Compatible memory cards MMC have the MultiMediaCardTM logo on the map. The following memory cards are available at HP:
• 32 MB SD - C8895A
• 64 MB SD - C8896A
• 128 MB SD - C8897A

Find a good card now is a big problem.

Full manual: http://h10032.www1.hp.com/ctg/Manual/bpl51337.pdf

I hope this helps.

Tags: Notebooks

Similar Questions

  • HP photosmart 735: software for camera digital hp photosmart 735

    I have an older model device a hp photosmart 735 w/dock.

    A few months ago, I got laptop. I seem to have lost my software disc and without it I can not download my pictures from my camera. Is it possible to get a new drive or download. I tried to see if I could find under drivers, but when asked what are the technologies that I use, that there is no option for Windows 10.

    Someone please help.

    Thank you

    Walid

    Hello

    It is a very old camera that has:

    • Internal 32 MB of SDRAM
    • Internal 16 MB FLASH
    • A card slot Secure Digital (SD) or MultiMediaCard (MMC) memory taken in charge (all sizes up to 512 MB).

  • HP Photoshop Essential has stopped working

    Tried to install the necessary drivers for Photosmart 735 digital camera.  Since then, received message "HP essential Photoshop has stopped working".  Also received HP error "the procedure entry point hpqpsapp.exe could not be located in dynamic link library hpqpsutils.dll"

    Have tried restarting, uninstalling and reinstalling the drivers who started the problem.  Impossible to find a solution to HP or Microsoft.  Equipped with Vista.  Other possible solutions?

    HP has written drivers for their products, not Microsoft.

    http://welcome.HP.com/country/us/en/support_task.html

    Drivers HP and Install info at the link above.

    Enter your model number for each section.

    http://welcome.HP.com/country/us/en/contact_us.html

    Details of HP.

    http://h30434.www3.HP.com/

    HP forums and where there are posters with similar problems.

    See you soon.

    Mick Murphy - Microsoft partner

  • HP Photosmart C7280 Scanner not detected since Mac OS installed Sierra

    Hello

    I installed Mac OS sierra

    Since then, my HP Photosmart C7280 scanner is not longer detected:

    • In the system preferences tab scan
    • Image transfer can not find any device

    I reinstalled the device

    Print shops

    Scanner is connected to the router (Hello) by Eternet

    Scanner still works when you use a Windows 10

    MacBook Pro (retina, 13 inches, end 2012)

    macOS Sierra Version 10.12 (French)

    Here is a link to the HP support pages, please read carefully including the FAQ, there is a link to the HP scanning utility.

    Drivers for HP printers and scanners are downloaded on the App Store, have checked whether there are updates for your HP product.

    What OS did you go to?

  • HP Photosmart C8100 upgrade to Mac OS Sierra Scanner no longer works.

    After that, I'm going to macOS Sierra my HP Photosmart C8100 Scanner no longer works.

    I had try HP they don't site any upgrade in the Sierra. I get my scanner to work.

    I do not have this as a new printer/scanner each time new software upgrade of the Mac computer.

    It sounds like Hello multifunction.

    Have you tried to install the HP drivers, reboot, then delete and add the printer again?

  • 29 Firefox won't print on my laserjet1020 and printers hp photosmart c4780

    In previous versions of Firefox, print with my HP Photosmart c4780 and Laser Jet 1020 worked well. Now, all that happens is the flow of the page. The pages are blank.

    Hi k9ahl,

    Can you explain if this happens with all pages or only PDF files open with Firefox 29,0? If it's from PDF files, I have been informed that this a bug that will be fixed by an update published Friday morning time Pacific.

    I hope this helps.

    Best regards.

    Kosai

  • Photosmart 7520: News on the firmware updated

    Hello

    I was talking to HP support problems with the latest firmware pushed for the 7520 breach ePrint and network services and they told me that there is an updated release due to be released for download via the software / support site, I was wondering when the new firmware is supposed to be available?

    Matt

    Hello

    A new firmware to restore the ePrint feature are available on hp.com, however it is currently available for MS Windows :

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

    I don't know if / when it wil become available for Mac OS, that's why I suggest you get a Windows PC and update of the printer, if you can have such an or can borrow a laptop to a member, family, etc.

    If you need to use another PC, remember to install the printer drivers first prioor runs the update:

    http://ftp.HP.com/pub/softlib/software12/COL43773/MP-108670-3/PS7520_1315-1.exe

    Kind regards

    Shlomi

  • HP photosmart 5510 won't print black

    I have a photosmart 5510 which do not print black. All other colors are OK. Have changed cartridge and went through all the steps on the site of diagnosis without success.

    I really need to turn it on. Any ideas gratefully received.

    See you soon.

    Here is a link that can help you with this problem. It can a be a print head.
    http://goo.GL/OTmPV

  • What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

    1 HP Photosmart Premium all-in-One Printer (309 (a)

    2. Windows Vista 64-Bit family

    3. the general printer error 0x61000f6

    4. no change known to printer before developed problem

    0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.

    Let me know if it helps.

  • My printer has an error 0xc19a0003 message. HP photosmart Plus

    I have the hp photosmart printer more.  CN218A product number and model number B210a.  It has been printing fine until today and it says 'system failure-0xc19a0003 of ink '.

    I turned the printer market even as it says on the screen and it did not help.  I also unplugged the printer from the computer and making electric and re-tried to no change.

    Help, please!

    Normally, an ink system failure message points to a problem in the printhead of the printer. This document will take you through a few things you can try to do to solve the problem. If this does not work, check the date on the print head. The day is the print head was performed. The printhead warranty expires two years after that date. If the print head is under warranty, contact HP for a new. If the print head is out of warranty, follow the steps in the post of Bob_Headrick to do a physical cleaning of the print head nozzle. Does not use the post to Bob_Headrick if the printer or the print head, is still under warranty. If this does not work, you can contact HP to buy a new printhead, or you will need to get a new printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

    HP Technical Support call case form:
    http://goo.GL/w7Hgh

  • Photosmart 2610: Photosmart 2610 All In One

    I recently had to reinstall my HP Photosmart 2610 all-in-one.

    I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

    When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

    However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

    Help!   hehehe

    Phil

    Try to reinstall the software, use thislink to dnload the driver full features and software.

  • Photosmart HP 7520: HP Photosmart 7520 does not connect to web services

    My printer suddenly stopped connecting to the Web Services a month ago. I had already used web services successfully for two years, then my computer infected with malware and ruined a lot of things. I guess that it also affected the printer since it is at the same time ceases to function properly. I can print wireless very well all of my devices, but doesn't connect things like regular printable.

    I tried restaring the printer and the restoration of the default network printer. I also tried the steps listed in this forum http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-Photosmart-7520-unable-to-connect-to-Web-Services/td...

    Hello

    Apologies for jumping!

    For the Photosmart 7520, the latest firmware must be installed in order to maintain a connection to Web Services.

    The firmware can be installed on any Windows PC via the following link:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

    Kind regards

    Shlomi

  • HP Photosmart 6250: Printer cannot access server

    Hello

    I'm trying to set up my printer HP Photosmart 6520 for the first time.

    The printer is connected to my wireless router.

    My computers and iPads can access and print using the printer.

    BUT when I try to use Web tools

    (1) product update,

    (2) activate ePrint or

    (3) enable Web Services

    I get the error message USELESS "Problem connecting to the server of Web Services"

    I am able to connect to the Internet using a web browser, so I don't have an ISP issue.

    I'll put in place the printer at home behind a NetGear wireless router.

    The implementation for the browser does not use a proxy, so I have no proxy information.

    Is anyone able to help.

    Thank you

    Ron

    Hi Ron,

    Since your d\ownlaod PC and install the latest firmware of printer below, this is essential to maintain a connection with the server web services:

    http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040/swItemId/OJ-112335-4

    Once done restart your printer and try to activate Web Services once more.

    Kind regards

    Shlomi

  • HP Photosmart 7525: Scanning under MacOS Sierra is no longer working.

    Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my HP Photosmart 7525 is no longer allow me to save the scans to the computer.  The "Save" button is gray and impossible to be clicked.  He'll copy, print and scan documents, I just can no longer save to my computer.

    When I enter the HP utility > settings > scan settings > scan to the computer, the software scans my system, then gives me an error message that says:

    "Scan of the computer can not be activated.

    The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

    I completely uninstalled the old driver software (which says that HP should run on any Mac OS after 10.6) and reinstalled the latest drivers that it is compatible for the 10.11 and later.  I always get the same answer.  Printer will print, will copy, will scan, but not save to the computer.

    Yes, I already rebooted one device at a time, and Yes, I disconnected and reconnected all devices in separately.

    What can I try next...?

    Hey there.

    EASY SCAN can be installed, use 1.6.0 - works well with SIERRA.

    Kind regards.

  • HP Photosmart AIO 7520: Scanning under MacOS Sierra is no longer working.

    Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my Photosmart HP 7520 is no longer will allow me to scan or save the scans to the computer.  The "Save" button is grayed out and cannot...  HP must send the updated drivers that resolve the problem very soon.

    Trash the older Scan Utility as he said? Who did it for me. Maybe try to restart after that? And restart the printer too?

Maybe you are looking for

  • Unable to connect by Satellite C70 - A - 16 L to my WLAN

    I bought a Satellite C70 - A - 16 L today, when I tried to set up a wifi connection using my known password I got the message "cannot connect to this network. I'm not a techie whizz, far from it and I wonder if I am missing something that may be obvi

  • HP laptop - 14-ac004ne: Bios password

    HP laptop - 14-ac004ne Product number: N1K06EA My laptop is asking password in the bios and after 3 attempts it shows the system disabled [I 53346305] Please help as soon as POSSIBLE. Thanks in advance

  • Windows 2000 on a Qosmio G10

    Hi everyone, I am considering installing Win2000 on my G10 because I think it's an OS better than XP. Does anyone have any experience with the game, or I am about to be the first to give it a try. In case anyone out there has done this before,the G10

  • How to delete the partition CDFS on PX1267E - 1 32?

    Now how can does anyone I delete the partition on that disk (PX1267E - 1 32) CDF?I want this disc using as an external USB without the CDFS partition hard drive.I do not use the REGEN backup software. Is this possible? I've tried several programs to

  • Two pre-charge at the start of the operating system

    BONES of YosemiteTwo pre-charge at the start of the operating system: Video: https://www.YouTube.com/watch?v=D45Hl-ZgHTI Is this normal? MacBook Pro with the Retina display,OS X Yosemite (10.10.5), 15 "MJLT2LL/A