HP Photosmart B109n: my printer software won't install

Similar Questions

• HP Photosmart B109n-z (printing problem) Please help

  Hi all

  I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

  The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

  I work for myself, and work at home, it will get this resolved as soon as possible.

  I checked the cartidge - it's good.

  I checked the connection and the Bay print cartridge - they are clean.

  Help, please.

  The color works fine.

  The issue of black ink is the same print, scan or copy.

  And I have tried turning everything off and on again!

  Hello

  You could try the Solution 5 in the document troubleshooting that I am a link here:

  Quality of ink troubleshooting

  This will show the colors that are printing.  There are also additional troubleshooting steps to follow

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• Photosmart b109n cannot print in color black

  I have a Photosmart b109n. I tried to print a bunch of images and half of the images was good, but the other half was very strange. As you know a printer when it prints a picture, it makes all the colours of yellow, magenta and cyan, even in the dark. My printer can print colors perfectly but cannot print black parts on the image. It's a gray a little something. Here's an example of what it's like (the grey parts had to be black):

  My mystery is now solved. My statement was false, that the printer uses the black cartridge when it is printing photos. So the real problem was that the black ink cartridge.

• Windows 7. HP Photosmart B109n I print 3 leaflets of column.

  I have windows 7. HP Photosmart B109n. I print A4, 3 column (without borders) leaflets, but print is cropped 1.25 down right. Tried the same thing with an impression of A4 1 column - 5/8 only in cropped on the right. Keeping the margins as small as poss, but always cropping 1.25 in. on the right. How can I increase the print area or reduce margins further, please?

  Page 64 of the user manual treats the margin control to your model of printer settings. I hope this helps.

• Photosmart all-in-one 5524: 5524 printing software can be installed in windows 10

  Hp for 5524 software can be installed in windows 10

  Hi, thank you very much for your comments, it seems to work now that I realised your suggestions.

• Printer inkjet HP Photosmart 8030 - software won't install - printers work somehow, but not totally

  HI-World, compaq HP does not have software for printer HP 8030, works of printers in some respects, but not totally

  concerning

  johnlewisTT

  Do you mean ' will not accept '? What do you mean "works in some ways, but not totally.

  What support HP should say when you contacted them?

• Cannot run the Photosmart C7180 HP printing software

  Hi, I'm new here.

  I had been using the printer, and following a system failure and corruption of a couple of files, I had to download the operating system on the HP site.  When I tried to run the software, said that a more recent version is already installed on my system.  I deleted all HP components using the Add/Remove function on my control panel.

  The software still wouldn't go, indicating the same problem with a newer version,

  I have looke in the Program Files folder and found that the HP programs were not deleted and proceeded to delete them manually.  After the reboot, I still ran the files downloaded from HP and again received the same message on a newer version already on my system.

  I guess that somewhere there is a tag that should be deleted.  I am not a computer wizz so if anyone can suggest, where should I look?

  My system is a Win XP and is up to date, running on an Intel-based system.

  Thank you.

  Gordon

  Well, good news.  I had the new program in place.  My problem was being too specific, trying to load one program for my C7180.  The solution was first to use the option to HP to check my system and to recommend and automatically download the appropriate program.

  He ended that there was a more recent software, which covered series printers Photosmart 7100 together.

  Thank you for your time David.

  Gordon

• Officejet 5610 - umpteen tries, but some printer software won't just UNINSTALL

  Have to / want to completely uninstall all the HP printer package in order to do a clean INSTALL.  I have Windows XP and this printer has been working well for a few years now, but stopped a couple of weeks.

  Slow death: initially, could not print but Scan ok & the window Solution Center was fine.  Then Scan will not work, but still the window SC was fine.  Now, the entire batch is dead.

  Last week, tried everywhich way suggested in various forums, including it, but some of the software with respect to this printer just will not go away.  Tried on (in no particular order)...

  • uninstalled via the control panel configuration/add or delete - it's just a dead-end; does absolutely nothing, but can see the entries of HP products.
  • Registery cleaning... no obvious improvement
  • install the HP Web site for what he will clean or recognize the persistent stuburning software.  The process has given the option "Uninstall" which appeared to be successful while he continued to 'install' which failed.  All I get is window without options black HP Solution Center.
  • repeatedly tried to install using the CD that came with the printer... Failed!
  • tried pulling my hair don't go out several times along the way... no obvious resolution!

  End of my teather... Any further suggestions as to how I could get rid?

  From the display of the query, someone suggested unintsalling HP printer and Adobe Flash and then first re - install Adobe Flash using IE (no other browser Firefox especially not!) and then re-installing the printer.

  Has done exactly that but still no result, although slight improvement that I now have small white boxes in the window completely black original HP Solution Center, but still nothing works.

• Photosmart B109n-z printer: printer HP Photosmart Wireless B109n-z-horizontal gray stripes on a black background

  My printer has started to produce printing black ink poor quality despite the change of cartridges and all other things related quality control. Black text is periodic display faded horizontal lines with sharp text blurry. All switches quality of ink have been increased to the highest quality without result.

  The Test page shows no problem with black type face being perfectly crisp and clear and colours print normally.

  The diagnostic test page horizontal gray bands shows in the black print ONLY. See below. Is it a matter of change, printing headed into black ink?

  Thank you

  

  Hi Chatsworth52,

  Sorry to hear that none of the steps has helped solve this problem.

  Most likely the print head needs to be replaced, but no guarantee that will fix this problem either.

  Thank you.

• Photosmart c4700 software won't install - cannot find files

  
  

  Hello Forhecz,

  Welcome to the HP Forums.

  I see you have a problem with getting the printer is installed on your computer Windows 8.

  If you are using a USB connection, please unplug the cable from the printer and the computer and let it.

  Please click on the following link for the printer HP install wizard for Windows and follow the instructions for installation.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

  See you soon,.

• How to install Photosmart B109n-z on a DHCP network wireless

  I'm trying to install a HP Photosmart B109n-z on a wireless network.

  There is no DHCP server on the network.

  I can install and print using a USB cable.

  When I try to reconfigure the display of the USB wireless I get a message that says printer

  use the IP 169.254.95.189 which is not compatible with the address IP of the PC 10.1.9.1.

  HP documentation * recommends * using a DHCP server. So I guess it's * possible * for

  do without. But I have found no instruction to do so.

  There is a related announcement with the following title:

  > Resolved: Photosmart B109n-z - setting a static IP address on the printer on an active DHCP server router
  > 04/01/2010-11:24

  That the display shows:

  > Type the IP address in a browser.  You will see the internal settings of the printer.

  But when I go to http://169.254.95.189 I have a connection delay.

  169.254.95.189 ping succeeds. When I run a tool of command ' arp - a', I can see the printer.

  The above has been done using a Windows Vista-based computer. To get a second opinion, I started a Linux machine

  and did a ping 169.254.95.189. Which failed. Then I did a

  > Add a route - host 169.254.95.189 gw 10.1.6.1

  10.1.6.1 where is my wireless router. Then ping succeeds but looking upward of http://169.254.95.189

  still gives a timeout.

  So my main question is: how to set up printing on a DHCP-less network wireless.

  And a second question: the printer is supposed to listen on TCP port 80 (http) or a magic

  necessary to turn on.

  IP STATIC ASSIGNMENT HOWTO FOR HP PHOTOSMART B109n-z

  The following instructions allow to assign a static IP address on an HP Photosmart
  Printer B109n-z without using a DHCP server, and without using a router. The
  statements can also be used for other types of printer setup.

  Necessary equipment:
  -A HP Photosmart B109n-z printer
  -A computer with a wireless network card

  Laptops usually have a wireless network card. Stationary computers
  usually not.

  1 BACKGROUND

  B109n-z has four ways to communicate with others:
  (1) there are buttons and a small screen on his forehead.
  (2) it can print and scan pages
  (3) there is a USB connection
  (4) it has wireless capabilities.

  We will use (1), (2) and (4) to set a static IP address.

  2 BUTTONS AND DISPLAY

  If you're reading this, chances are that you tried to install the B109n-z and that
  the installation failed. The installation may have left the B109n-z partially
  set up, so the first step is to bring the B109n-z to its initial settings.

  On the front of the B109n-z there is a small screen. To the left of the
  It is a column of three buttons. To the right of the screen, it
  is a column in addition to three buttons.

  In fact, the buttons are just touching sensitive areas next to the screen. Each
  button's background light that the printer can turn on and off. During the
  light behind a button is disabled, the button is invisible.

  The buttons in the left column are labeled with an arrow to the rear, an 'X' and
  a symbol "OK." The buttons on the right hand column are all labelled with dashes.
  To the market, the screen displays something like this:
  Scan
  Photo
  Copy

  The background light of all three buttons in the right-hand column are on. Now press
  the button to the right of "Scan", i.e. the highest button in the right column.
  Now, the screen displays something like this:
  Wireless menu
  The scan to PC
  Scan to memory card

  Now, press the button to the left of the menu "wireless" to get this:
  Turn off wireless
  Wireless configuration
  WPS

  This option enables the radio into the printer. The screen comes down to this:
  Turn off wireless
  Wireless configuration
  WPS

  Now press the button next to "Wireless Setup", then press
  the lower right button until something like 'restore wireless settings' is
  selected. Then press 'OK' (the button at the bottom left) and answer 'Yes' to 'are '.
  "ensure that" issues. Now, it comes down to this:
  Enable wireless
  Wireless configuration
  WPS

  Finally, if the wireless radio is turned off, turn on the radio wireless with the help of the
  button at the top right.

  Now, the radio of the printer is on, the printer has an IP address of 0.0.0.0, as well as the
  printer Wireless Announces that he runs a computer-to-computer wireless
  (ad hoc) network without security. The SSID of the network is "hpsetup".

  3. CONNECT TO THE PRINTER, STEP 1

  Now, you need a computer with a wireless interface card. Ensure that the computer is
  on. If the computer runs windows, ask for a list of available wireless
  networks. If she runs something else, do something similar.

  In the list of available wireless networks, you should find a named
  "hpsetup". Connect you to it. Ignore the warning that the network "hpsetup" is
  situation of insecurity.

  If there is more than one network named "hpsetup", one of them will be your
  printer and the others can be printers in your neighborhood. Those of other
  could also be the work of airborne viruses that have infected your neighbors
  computer.

  4. PRINTING CONFIGURATION

  If you followed the instructions above, the display will show this:
  Enable wireless
  Wireless configuration
  WPS

  Select "Wireless configuration", let "print the network configuration page.
  selected, then press OK. The printer now prints a page that says things like
  this:
  IP address: 169.254.95.189
  Subnet mask: 255.255.0.0

  5. CONNECTION TO THE PRINTER, STEP 2

  Now assign the same subnet mask and IP address similar to laptop you such that:
  IP address: 169.254.95.190
  Subnet mask: 255.255.0.0

  The operation of bitwise AND of IP address and subnet mask of the printer must be equal to the operator AND the IP address and mask subnet of the laptop.

  You need to know how to set the IP address and mask of the subnet on your laptop. If you have struggling to survive on a network without a DHCP server. But if you need an update: go to the 'properties' of the network connection and choose the TCP/IP settings.

  Now open a web browser such as Internet Explorer, Firefox or whatever and look for http://169.254.95.189

  Now you can set up the printer using the web browser as an interface. To set a static IP address, do the following for example:

  -Click on the Networking tab
  -Choose wireless along the left side
  -Choose the IPv4 tab
  -Click on the manual button IP
  -Enter the desired IP address
  -Enter your subnet mask (255.255.255.0 unless you know otherwise)
  -Optionally enter an IP of the appropriate gateway (see INFRASTRUCTURE NETWORK below)
  -DNS leave empty
  -Click 'apply '.

  When you click 'Apply' you of course lose the connection to the printer.

  Now close the web browser, set IP address and the subnet of the laptop to what it was and try to connect to the printer using any IP you assigned.

  6. CHANGE NETWORK INFRASTRUCTURE

  If you want to change an ad hoc connection to aid in making a
  network infrastructure, you need a wireless router. Ensure that the
  The gateway of the printer IP is the IP address of the router in Section 5 above.

  You can now install the software on the CD supplied with the printer. If you have previously installed the printer simply to connect a USB printer,
  the USB cable, insert the CD and reconfigure to wireless technology.

  During the reconfiguration, you will be asked which network to use. Select your
  own network (that of the router to use). Do not select the
  ad - hoc hpsetup network.

• Old software won't uninstall

  I had problems with my HP Photosmart B109n so I tried to re - install.

  I delete the old, as I was in charge, I downloaded the installer, but it won't complete installation, it tells me that the driver is missing.  I tried to uninstall the program to try again, but it will not uninstall.  I'm at a lost what to try next.

  My operating system is Windows 8.1

  Hi Tracy16,

  Thank you for your answer!

  I would try to make a three level uninstall. Browsing through this guide. Fatal error ' error 1155. Not found. "(Error 1155 MSI) displays during the Installation of the software in Windows XP." The steps are the same for Windows 8.1.

  Hope this helps and have a great day!

• HP Photosmart b109n won't print black

  I have a HP's Photosmart b109n who suddenly stopped printing black ink. All other colors are printing very well.

  I tried all of the suggestions that I can find in various forums, including cleaning & advanced cleaning, switching off & replacing ink, realign the printer etc..

  Someone at - it any other suggestions. I am currently working at home, so my printer is important to me.

  Thank you.

  Happy to say that my problem has been resolved. I repeated the same steps several times that I had already made (including an update of the HP software) and my printer has suddenly started printing black. I don't know what was the real problem!