HP Photosmart5520: Printer HP Photosmart5520 fault

Similar Questions

• Printer connected to the network, MG5320 will print without mac fault but not with windows 7

  Canon MG5320 printer works great and I am able to print wirlessly of my mac mini which is 3 rooms away from the printer, but my windows 7 laptop is right next to the printer can print only if USB is connected and not wireless. I recently tried to separate the printer and the computer laptop windows 7, placing the printer rooms 2 far but the custom still pc wireless printing. I don't know what to do now?

  Hello smiles917.

  It may be possible that the Windows 7 computer is configured to use the USB port and not on the wireless connection.

  Uninstall and reinstall the drivers should fix this problem.  Please, perform the following steps:

  1. open the control panel from your desktop or the Start Menu.

  2. open programs and features.

  3 uninstall the drivers MG5300/MP and the Canon IJ Network Tool.

  4. close all open windows.

  Once this has been done, please visit our Web site at the following address to download and install the latest driver for MP for Windows 7.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#D...

• OfficeJet pro l7580 printer print shows 75% smaller

  Windows 7 pro 64-bit

  HP p7 - 1380t

  the software is ojprol7x00_full_14. Reinstalled today and the problem was not solved.

  Printing is 75% smaller than it should be.

  Some parameter maybe, but where?

  Hi Jason,

  The problem has been resolved.

  Was it not the HP printer to the fault, but a program I wrote.

  Once I discovered the pilots were not at fault, then I realized

  my program was the culprit.

• hpc309a will not print in color. black printing after upgrading the operating system

  Issue began immediately after the upgrade to mac Snow Leopard 10.6.8. Yes, the cartridges are fine. I downloaded the latest drivers and firmware. I chose the best and high quality paper during printing. Still nothing.

  OK, so the printer is at fault.  First of all, try to clean the holes in the cartridge by following the instructions on this page: http://support.hp.com/us-en/document/c02253171

  If this doesn't work, remove all the cartridges, and then lift the latch on the right side of the cart and remove the print head Assembly.  Clean the electric contacts with a damp cloth not fluffy (the fabric will be ruined with ink), then rub the surface of contact on the cart.

  Reinstall and start over.

• PSE 13 will not print to my Canon MG6150.

  Elements 9 fact, 13 first made, but not items.  Printer is my fault, but the fault said 'because cannot load default printer". help please

  Hello

  Go to the Help menu > update

  It will update your application to 13.1

  then go into the Editor Edit menu > preferences and click Reset preferences on the next launch.

  After doing this, restart your application...

  

  See the article for the same:

  ml https://helpx.adobe.com/Photoshop-Elements/KB/Elements-Printer-issue-incompatible-Error.HT

• Very confused C4380

  My C4380 has worked fine since I bought it a few months ago.  Today I printed a document which has been a success, but when I went to print later semed printer has lost its connection wireless.  I decided to uninstall aand then install, but I cannot remove the software no matter how I try.  I get "HP install Uninstaller" has stopped working.  So, how I uninstall it?  I just downloaded the software in case the cd is broken. Also on the printer wireless sign on the front of the printer turns off.  I don't know if it's a software problem, or if the printer is at fault, I used a USB cable to see if my pc will see the printer, but that did not work or the other. I printed the HP Network Configuration page, it shows the status of the network is offline and under wireless, status is disconnected.  I hope someone can help me to get the printer working properly.

  Yes, I had someone turn today and it took 3 hours to figure out that there is a conflict between IE8 and HP software.  Serves me right for using a beta program, I will be once again.  Thanks for the reply.

• photosmart5520: 5220 printer print only all two other lines of print

  fault is suddenly appeared... no changes.  Prints ok on best - but expensive for quick prints

  Dear Helen,

  Strong resembled the black print cartridge - no hole there I thought, deleted the HP high-low band and behold, a small hole.  Test printing looks good-* beep * funny idea to cover the holes look like replacing those explains all.

  Never heard of breather hole

  Thank you

• photosmart5520e: e-print how?

  Hi friends just bought an hp wireless printer this eprint thingy how can I acess on the printer? connected 2 my ok netwok sent a test email 2 printers address emai glot saying eprint received job HOW DO I ACESS IT 2 PRINT IT OFF?

  Hello

  ePrint lets you send the contents of the e-mail assigned printing ([email protected]) e-mail address.  There is also an eprint mobile application that allows you to print wireless from your mobile device. Because you are using a windows system 7 the eprint by email is the only option for you.

  Check that the printer is connected to the internet (connected to your wifi network). That could be one of the reasons why your test email do not print.

• HP Photosmart5520: The failure of the 0xc19a0042 printer message

  Hello

  I tried all the help on http://support.hp.com/us-en/document/c01458034 without success. I reset my printer several times but still I have the same error message. Is there anything else I can try or is it time to get a new printer?

  Thanks in advance

  Chris

  Hi Chris_P7,

  You read the appropriate document to resolve the failures of ink for your printer system.

  If the questions is still not resolved, you can buy a replacement printhead which is step 10 of the document you attached.

  However, there is a cost associated with this part.  It may not be worth it for you to invest in an older printer that may or may not continue working after replacement of this part.

  Maybe it's time to buy a new printer that will come at least with a guarantee.

  I wish you the best in making this decision.

  Jean

• Photosmart5520-all-in-one: printer displays is not on the computer - cannot print

  I desperately need help... I have a photosmart 5520 printer all in one for more than a year, it is set up wireless with my laptop HP and up to today, it worked perfectly. I changed the ink cartridges yesterday and did a print and everything was fine. Today, I can't see the printer on my laptop... it has simply disappeared. I tried to open printing HP & doctor scan on my desk, but it does not, is not the printer shortcut icon.

  I tried to download the driver of printer again 123.hp.com, and although he has downloaded and saved in my downloads, when I try to run it, I get then them 'extracting files' the 'permission' box, but then nothing!

  What the hell happens and what can I do to fix it?

  I have very limited knowledge of computers, then all statements must be explained in a VERY simple!

  Thanks for the tips. It wasn't the printer, it was a problem with my HP laptop. ..... Idid a system restore last week and hey presto, it's all good now. I took note of your instructions anyway, just in case I have to do a restart in the future. I really enjoy taking the time to respond to my problem. Once again, thanks a lot. Jan x

• printing on my hp photosmart5520

  just tried to print a page of my bank account and I wanted to just print some information, but there were 3 different section of the page all 3 in addition to the other then it printed everything on top of the other. How should I do if I can just print the 1 area and not all 3 thanks Len

  Try resetting your router. Unplug it for 30 seconds and plug it in again. Re-connect the printer to the network again.

  You can also run the doctor print and scan after that and check the results.

  http://support.HP.com/us-en/document/c03286146

• Problem HP Photosmart5520 activation

  1. number and product name
  Photosmart5520 CX042B

  2 operating system installed (if applicable)

  Windows 7 64 bit

  3. error message (if any)
  None

  4. all changes made to your system until the problem occurred
  No, had the problem from the beginning.

  Problem:

  The printer lights only once. When I connect the printer to the power source it wil turn on once and when it was turned off I need to reconnect (take out and plug it into the power socket) to the power source to start again. I've already been steps 1 to 4 of the resolution of the problems on this site of the pit:

  http://support.HP.com/us-en/document/c01321436

  but this does not solve my problem.

  Hi Steven,

  No, unfortunately, I don't have any other ideas.  If your printer is still under warranty, I recommend that you call the HP support at the Contact HP worldwide.

• Strike number CP 2025 printer cleaning/fault

  Hello

  My company has invested in an HP CP2025 printer a couple of weeks, that is used on the network of eight or nine people.

  However, there is a problem where, after printing several pages, generally 3 pages, the printer goes into cleaning for a while and then comes up with a fault typing error. At this stage you hav press OK on the printer to continue the process. And then it repeats.

  The printer decides to print some pages twice, but not all of them also and it seems to be no pattern in which one she repeats.

  Any help will be appreciated, because I can't work this.

  Thanks in advance.

  Hi all

  We just got a new CP2025 gave us last night at our Church.  I am the tech administrator for the Church, so it was my task to install the printer with connection of the printer drivers.

  When we (me and pastor) installed the drivers from the printer and print a test page, we had those little dots on one side of the paper.  Thinking that it is just a toner sedentary, I took each individual toner cartridge, he trembled and succeeded him.   Always had the points.

  So, we looked at the documentation supplied with the printer.  Nada on what to do.  Says "For the resolution of problems, call HP Support."  Then I give the floor.  the hours are from 8 to 8 East, so they are closed.

  My pastor calls for HP support today - the tech told him that "cartridges of toner in a printer that has remained in the warehouse will be deposited."  You must clean and calibrate the printer to remove it. ' So he did, and the points disappear.

  This is - why isn't that one of the installation steps in the paper documentation that came with the printer?  We have cleaned the printer last night, and calibrating it, it is not very clear on how to do it.

• LaserJet P1102w do not restart of printing if paper runs out, half way through. Fault or feature?

  Is it a fault or a line "without papers" of the P1102W that if the tray is out of paper half way through a print job it is unable to continue with the print job after the container is re-filled?  Of course not the end of the world, but it's more than a little boring.  Y at - it a necessary software/firmware update or is there a secret button combination that re - start the print job?

  Is not very intuitive, but I discovered that raised the lid to access the toner and belittle without touching anything else clears the error paper output and you can print...

• Photosmart Premium C309A: C309A Fault Protection to access the properties of the printer and will not print (Windows 8.1)

  My C309A, connected via USB, my system worked very well through the life of WIndows 7 and Windows 8.1, until this week.

  I did run the software in PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 4.exe and then this week I received notice that there was a software update. I downloaded and installed PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 5.exe, and now my printer does not print.

  I uninstalled the previous version, without error and installed this new version, also without error. But, when I click on printer properties

  

  I get a protection fault.

  

  If I try to print a test page, the system hangs for a few minutes, then the devices and printer page is closed (with no message).

  I tried the Ethernet connection instead, but that made no difference.

  Interestingly, even if printing does not work, scanning and fax are. I can connect to the scanner from Paperport or Adobe Photoshop Elements.

  I uninstalled the software several times and tried both the old and the new, and they both do it.

  I tried to run print and Scan of the doctor. Who says that the driver is missing some files and to uninstall and reinstall, but I did it at least 6 times without success.

  Any ideas?

  Thank you

  Stan

  FWIW, I have set the printer by improving the system to 10 Windows (which went very well). It works fine now.