HP printer/vista usb

Similar Questions

• LX - 800 Parallal printer port USB laptop.

  Madam, Sir, is - can anyone help on how to get the installed printer. I bought a USB cable adapter Parallal and two of its ends is connected correctly. Then a CD must be inserted.  I did too and opened as appropriate. EXE file for the installation, but the message window have garbage written on it that I don't understand. Either the file is corrupted or is in a different language. Can someone help me to direct them to the site where I could download the. INF file in the language English. Thank you

  Is the printer Vista compatible?

  Epson provides Vista drivers?

  Shouldn't you be buyi8ng a side of Port PCMCIA card?

  See also:

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/9240271f-f0b5-431e-ac1c-3eaa0a67451c/

  http://forums.techguy.org/hardware/550757-need-parallel-port-add-card.html

• Acer m52265 and kodak 7AIO printer. Print via USB. Wi fi sees the printer, cannot print at all, communication error.

  This combination is used to work through the USB port. I replaced the cartridges and since then I can't it will be printing again, USB or WiFi. I have updated the printer driver. The printer display full cartridges. Anyone able to help?

  See you soon (not so) * address email is removed from the privacy *.

  Hello

  (1) operating system do you use?

  (2) what is the full error message
   
  Open the printer Troubleshooter
   
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
   
  Printer in Windows problems
   
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps.

• Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

  I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

  Hello! Welcome to the @DanLA forums

  I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
  5. Try another USB cable
  6. Look for an update of the Firmware: get the latest Firmware and updates
  7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck!

• I can't HP printer works again. Configuration, driver, switch print or USB port does not.

  I got the printer doesn't work after downloading the update and the usefulness of HP. They were put in a folder of Tamp, I think.  New utility and install HP downloads don't work this time. In addition, cat pulled the printer USB cable and I don't know where it was connected to. Message Windows XP says out connection or something about switch printing don't no configuration?  I don't understand any of this, can someone ' a please talk me through it? I have a lot of work piled up, legal and medical stuff and really need my printer.

  Hello

  What is the model number of your printer?

  It is sufficient to indicate the complete error message you receive.

  
  Method 1: you can refer to the documentation that came with the printer for printer connections. You can check the following HP link

  http://www.HP.com/United-States/consumer/everyday-printing/Wireless/USB-wireless-setupb.html

  
  Method 2: you can see the steps outlined in the article below to solve printer Windows XP problems

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• printing from usb 1102w

  I have been using a 1102w wireless but has recently moved to a place without wifi and tried to print using a usb cable instead but were unsuccessful. What is required to print via USB? Thank you!

  @newlaserjetuser

  Just to clarify, you want to use this printer via the USB cable only. If so, then please uninstall all SW downloaded and installed from your laptop.

  You can uninstall the SW by going to the start menu > HP folder > p1102 folder > uninstall the printer. Go to your C: / / drive > Program Files > HP folder > delete a folder that has the name of the p1102 on that file. Clean up your trash. Restart your computer.

  Download and install a new driver for the product on hp.com page. This will ensure that you have a new updated driver. Follow the instructions to install SW. One of the first screens you will be asked what you want connection/installation method, choose USB. It will tell you when to connect your printer. The installation will be slow, so be patient.

• Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  I am not familiar with these communities - not provide Adobe and LR all direct support?

  You bet it's your page layout. As I said, the Epson driver has many offers for the same size paper. In addition, do NOT use Auto expand in this selection.

• Cannot print through USB on Windows 8 router, but can through windows 7 and Vista

  Problem:

  I have a printer that works for both computers windows 7 and vista.  I have two computers windows 8 that do not work.
  Material:
  laptop Toshiba P50 brand new.
  Router Asus RT - N16 rooted with the TomatoUSB firmware.
  Printer/scanner color Samsung CLX-3180.
  Symptoms:
  I can get the printer to operate if connected directly via USB.  The new Samsung universal of the generic drivers work.
  Even the driver connected via TCP/IP causes the printer to beep and the power wheels to run but nothing comes out.  It looks like windows and the printer think print things.
  What I've tried so far:
  Uninstalled all printer drivers and ports.  Then reinstalled with fresh downloaded drivers.  I had to erase the registry because pilots and port were considered to be in use.
  I have disabled the firewall without result.

  I fixed it finally I think.

  Here's what I did.
  -Deleted all drivers in the system.  (1) remove the 2 devices) remove the driver through "(propriétés dele de serveur d'impression 3) delete all created ports through"the print server properties""
  -Download the new drivers. type 64-bit
  -printer installed using Samsung universal driver 2 and player USB connection as required by the manufacture.
  -installed the TCP/IP port using the TomatoUSB facility and former driver of windows 7.  (wrong system to not check to see if the printer is online)  The pilot was CLX-3180
  -Changed the driver properties Advanced printer to "Sansung Universal Driver 2" tab
  -Change of printer model for Samsung CLX-3180 in the printer - Options tab of the device properties.
  -L' printer select clicked the button when changing the port.  Don't know what it does.

• try to use the old printer using usb/parallel converter cable

  trying to connect printer to computer hp 940c hp laptop pavilion via a USB cable conversion... windows vista

  Hi Doug,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. What is the exact problem you are facing the computer?

  2 do you have problems with the use of 940c on the Windows Vista computer HP printers?

  3. do you get an error message/code?

  For your reference:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with more information to help you.

• Suddenly unable to print: Vista, Canon MP460

  We can now print from our PC's X 3200 Acer Vista for our Canon MP460 printer/scanner.  The PC is around the age of 2 months and feel initially worked well.  However, for these last days any function related to the impression siezes up as unresponsive, leading to having to use the Task Manager to close it.  This applies not only to send a doc to print (the doc is displayed as "printing" print queue, but nothing happens), but also try to display Ports in the printer - properties.  We also have problems of suppression is not the queue documents - even if we can force by restarting the PC.  The USB connection between the PC and the printer looks OK - we are able to scan the docs who then normally save on PC, and the copy is too thin.
  So far, we tried:
  (i) uninstall/reinstall print two drivers CD supplied and the Canon Web site.  Some attempts have been frozen, others said that they were unable to completely uninstall.
  (ii) if stop/restart the spooler via a command prompt CMD.  Tried this because some discussion forums referring to known issues with Vista and printers: http://www.vistax64.com/vista-print-fax-scan/75468-printer-always-offline.html

  Don't know what else to try, any suggestions welcome!
  Thank you

  I'm stuck,
  Here are a couple more things to try.  First of all, try to plug the USB cable into another USB port.  If it is connected to a USB hub, try plugging directly on the computer.

  Go to services: click Start > Control Panel > administrative tools > Services and check to see if the service "mpservice" is running.  Make sure it is set to automatic and is started.

  If you have not already, see this download:
  http://www.Microsoft.com/Windows/compatibility/details.aspx?type=hardware&p=multipass%20MP360&v=Canon&UID=&PF=3&pi=2&c=printers%20%26%20scanners&SC=multifunction&OS=32-bit

  Let us know if this is helpful.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Epson printer, conversion of 25 pins printer to USB configuration, then update

  Have an old epson 1520 printer that worked great in XP pro sp3, had a 25 pin attached to the motherboard connector. Computer died.

  Now have a computer of a1430n of hp with Vista sp2, software loaded Epson 1520, including updates.

  Had to change the connector cable 25-pin to 25-pin too USB cable. (cable attaches h/f for conversion too USB.)

  Printer is turned on, but no answer, my question is does go to the back or windows has more information.

  Please help if you can

  Cable gender changers can be problomatic, some work better than others.

  Assuming that you have a desktop computer and your old Epsom made Vista drivers available, your best bet may be a PCI card with the corrrect series / parallel port to connect directly to your Epsom

• LaserJet 4 does not print via USB

  I have a Laserjet 4V that I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current. Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.

  Tuesday, June 15, 2010 19:39:56 + 0000, jbarrac1 wrote:
   
  > I have a Laserjet 4V, I recently bought a USB cable so I could connect to my HP M9252p under Vista 64-bit Home Premium computer. When I plugged the cable U he said it had detected new hardware and install. However, he didn't add the printer to the printer list. Then manually, I have added the printer and assigned via local port USB001. When I went to print test page it says it was sent to the printer, but neither made an impression or even appear in the queue. I checked the pilot site and it says that the driver is under Vista so I am current.
   
   
  It may be under Vista, but you did not say that you have installed the
  pilot. Did you?
   
   
  > Just to be safe, I disconnected and connected to my laptop HP 6910P XP and he acknowledged and I could start printing immediately. Would like to print from my desktop machine.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Windows 7 connection parallel printer laptop USB - someone at - it managed?

  I want to connect my printer Deskjet 722C for my new laptop Windows 7 USB port parallel port.    Has anyone linked successfully an old HP parallel port printer to a Windows 7 computer.  If so, what cable did you use and what have you got to do to make this work?  The others don't seem to be for Windows 7 and also seem to indicate problems in general.  Apparently, it is not as simple as a connecting cable.

  There are two possible problems here.  First of all, if you are using the 64 bit version of Windows 7, you need to apply the patch here.  There is a bug in the supplied driver that causes the spooler crash in x 64 versions of Vista or Windows 7, the patch corrects this problem.

  Second, as mentioned above the USB-parallel cables, converters can be problematic.  Make sure that the model you have is supported in Windows 7.  The links here have jobs where people are models of converters used successfully with Windows 7.

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.