HP Printer Wizard error open

Similar Questions

• Windows photo printing Wizard error message "not enough memory available"?

  Windows photo printing wizard when trying to print a jpeg photo get error message "not enough memory is available for rocess this command" I talked to my tech guy and he said another customer is having the same problem.  Is this a problem with a recent update?  How to fix?  This worked well before

  You can try try by forming http://support.microsoft.com/kb/315265 of disk error checking
  You can also try the steps in this link http://support.microsoft.com/default.aspx?scid=kb;en-us;241258

• hp 8600 Printer Wizard automatically opens when a document is placed in the scanner glass?

  I recently bought a HP 8600 Pro multi use printer. When I place a document on the scanner glass or Peter assistant printer does not open automatically. It's a convenient feature on my previous HP printer.

  The wizard can be obtained by double-clicking on the desktop icon, but it's a bit bulky. I wonder if this feature was removed for some reason, or I do not know how to operate it.

  Any help would certainly be appreciated.

  Hello

  No, it's not a sensor to do this bit.

  Kind regards.

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

• HP Printer Wizard does not open in HP 3050 All In One J610 series.

  HP Printer Wizard does not open in HP 3050 All In One J610 series after installing new ink cartridges.  Uninstalled and reinstalled printer software from HP website.  Printer Wizard will not always be open.  Using Windows 7.

  I understand the Printer Wizard does not work for you. I will try to completely uninstall the software and reinstall with updated drivers.

  Click here for the drivers

  Let me know how it goes.

• Printer Wizard does not not on HP Photosmart 7525

  Unable to determine ink levels because the Printer Wizard won't open on my desktop Acer all-in-One... even if it still doesn't work on my Acer laptop.

  Seems a recent issue... after an update from Microsoft.

  Any help would be appreciated.

  Hello

  Try following the steps listed below, I think that the problem should be solved:

  http://support.HP.com/us-en/document/c03640384

  If the question is, don't forget to provide more details - specific to any error or behavior while trying to run HP software?

• HP Officejet Pro 8600 Plus: software the Printer Wizard does nothing and eats CPU

  Hello

  I currently have a problem with the HP printer Assistant software. I use a HP Officejet Pro 8600. Well I uninstalled and reinstalled several times, redownloaded the latest version of the software from the HP site, tried with a wireless connection and a USB connection, but still have this same problem.

  The problem is when I open the printer to the printer Assistant software (scan, definition of printing preferences, etc.) nothing loads and what I noticed is that in the Task Manager, the program is constantly, nonstop to duplicate in the Task Manager and eventually slow down the computer because of the high use of the processor of these duplicates. I can't stop these processes in time compared to the amount of tasks in doubles at this very moment, and the only way to stop it is to restart the computer. I had this problem with Windows 8.1 and so I've upgraded to Windows 10 but exactly the same problem occurs. If I wait long if I get an error (0xc0000142) telling me that I can not load the Printer Wizard, but the process will still duplicate.

  I tried using the printer with other computers, but they do not have a problem by launching the wizard from the printer. I wonder what is happening and why is the Printer Wizard launch multiple neverending himself as tasks on the Task Manager?

  Add to that, printing works fine, it is train to launch the Printing Assistant software that is causing the problem.

  Hello @jellyjr,

• Photosmart 7525 Printer Wizard does not work with Windows 8 Pro

  Just installed the 7525, networking and it. Print, fax, etc very well, but when I click on the Printer Wizard, Notepad will open with two separate screens, HPSPProgress.hta, and HPSolutionsPortal.hta with many sequences of text I do not understand.

  I have a Toshiba Satellite P755-S5278 upgrade Windows 7 to Windows 8 Pro.  I know he kept Windows 7. However, 8 is here so is there a solution?

  Thank you

  Hello

  Use the hotfix or follow the steps listed below, if the program the error described resolution:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• How can I get my page back to my hp photosmart printers HP Printer Wizard 5510?

  How can I return my page Wizard HP printer for all-in-one printer, HP Photosmart 5510?  I used to have, but now all I get is a page that has only three choices: see what's printing, set the preferences and customize your printer.  I need the Printer Wizard page that has one of the following options: ePrint Setup, customize your printer, see what's printing, maintain your printer, set preferences, scan a Document or picture, manage scan to printer and printer Home Page.  Can you get it someone please let me know how I can return the Printer Wizard page?  Thank you, in advance!

  Connie7007

  Hi Connie,

  The simplest solution would be to reinstall the software of full functionality for the printer.

  The last phase of installation should fix your printer wizard.

  General instructions to install the printer software

  • Open downloads & drivers HP
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open HP Photosmart 5510 e-All-in-One Printer - support B111a
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·         On the bottom half of the main Web page for your printer, you can find some helpful videos to help with the installation of the printer software!

  ·         Scroll down the list of videos back until you find the video that best fits your situation.

  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.
  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, pages, solving problems, and SOLUTIONS to problems, How-to's and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Printe will not print. Says that 'the printer door is open', but no door is open

  Printe will not print.  Says that 'the printer door is open', but no door is open

  Hi ElliotBrahms,

  1. What is the brand and model of the printer?
  2. what operating system is installed on the computer?
  3. you have made no changes to the computer before the broadcast took place?
  4. when exactly you get this error message?
  5. What is the exact error message you get?

  Method 1
  Try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 2
  Try the steps from the following link:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Cannot install KB973688: error: Windows Setup: error opening installation log file

  Original title: cannot install KB973688

  After you download http://www.microsoft.com/downloads/en/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en#Instructions

  I run the file and get the error message from Windows install: error opening installation log file. Verify that the specified log file location exists and is writable

  Hello

  Try this:

  Step 1: Run the file as administrator.

  a. right click on the downloaded installation file.

  b. Select run as administrator.

  c. then follow the installation wizard.

  Step 2: If it does not help, reset the windows updates and then try to install the update.

  How to reset the Windows Update components: http://support.Microsoft.com/kb/971058  

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not scan to e-mail using HP Printer Wizard

  HP Officejet Pro 8600 N911a

  Connected via a wireless router

  ePrintCenter, Yes

  Windows 8

  Wireless printing help online (past)

  Error message: cannot find email application

  Everything works perfectly with my new 8600 Pro except when I try to scan to Thunderbird, my e-mail application, using the HP Officejet Pro 8600 (network): HP Printer Wizard.

  I can however, scan to e-mail Thunderbird if I use the printer menu LED.

  Suggestions?

  Thank you

  Kerry

  Unfortunately, this error message is correct, that the e-mail scanning function is not intrinsically included on this model of the printer. On page 54, there is a note on it:

  «NOTE: scan to email is only supported by HP Officejet Pro 8600 and HP Officejet Pro 8600 premium.» (page54)

  Those who would be the N911n and the N911g, so that you have the N911a (base model).

  For this reason, your only option will be to use the LED display on the printer and the application through web services.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• the Photosmart b110 series printer: Ox19a0020 error code

  My printer has error code ox19a0020 I looked for alternatives to the HP site and I cleaned the printhead manually according to instructions and pulled the plug and replace etc etc and yet it still has the same error message. Help

  Hi @nannie07

  Thanks for getting back to me.

  I agree, you probably need a new printhead.

  Printhead replacement games are available from HP customer or authorized service providers assistance.

  Contact HP for service in all countries except Asia-Pacific.

  If you have completed all the above steps and your product still has a problem, the printer service
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.