HP PRO 8500 there OCR scan of capacity?

Similar Questions

• OfficeJet Pro 8500 first stopped scanning

  My Officejet Pro 8500 has stopped scanning.  The message window says it is not connected to the network.

  I changed my DSL provided by the local cable company to ATT U verse a few months ago, but the problem does not seem to be related to this change.  I say this because when I ran the diagnostics, the printed page says that my problem is "the wireless radio does not work. Contact HP support. »

  HP support offered advice tech for $29) warranty, or sell me a new all-in-one.

  The wireless radio can be fixed? Is it a software problem.  I have to buy a new all-in-one?

  Hello JessicaD,

  I see that you have a problem with the wireless radio fails on your Officejet 8500. To inform you in this regard, if the radio has failed, it is not a replaceable part by customer, but I'll try to help you with the problem.

  Start as a result of this document: printer does not maintain the wireless connection.
  With this document, I would like to track:
  (1) restore your default settings of network on the printer.
  Go to setup (can be a wrench), network, and then restore the default settings of the network. After that the power on the printer.

  (2) turn off the wireless radio.
  Go to Configuration > network > wireless radio, you must have the option to turn it off.

  (3) hard reset of the printer.
  While the printer power cable for 30 seconds, while the cable is unplugged, press and hold the power button for 15 seconds. It's draining the printer of all power. Reconnect the cable.

  (4) turn on the wireless radio and reconnect.
  Go to Configuration > network > wireless radio - on. Then, go to Configuration > network > wireless are running the configuration wizard.

  If it was not successful in entering you connected to the network and or print wireless. You still have another option with the printer to try before replacing.
  If you have an Ethernet cable, you can set a wired network connection. Plug the Ethernet (cat5 cable) cable into the printer and the router. It will be assigned the printer a new IP, which means that you will need to add the printer to the computer. This will still allow the printer on the network and communicate with a wireless device.

  Please try all above and I would like to know how everything goes. Thanks for posting on the HP Forums.

• HP Officejet Pro 8500 has Plus: HP Officejet Pro 8500 a cannot scan more on the purchase of Mac

  I have not had any problems using the printer or scanner on the HP Officejet Pro 8500 has more when I had my old laptop to Windows 7. There was some HP software installed from a CD that allowed me to open the HP application and adjust the settings for scans, save multiple scans in a single PDF etc...

  Since switching to a new Mac OSX desktop computer, I can't install it whatever that either the old CD from my Mac has no CD/DVD drive. The only application of HP on my Mac is now HP ePrint, and which does not seem to offer something to scan with.

  The other option that have left me is to connect the Mac to the printer by USB, then choose:

  Scan > computer > iMac > save in Jpeg.

  But I get the following error message:

  "Connection error".

  The connection to the computer is down or HP scanning application cannot detect the OCR software. Check the computer for more details".

  What do I need to install, or the difficulty to get the scanner to work on my Mac please?

  Hi Karlos444,

  Unplug the printer and reset the printing system:

• Office Jet Pro 8500 won' t scan

  Help.  My Office Jet Pro 8500 scan is no longer.  I click on the printer icon and select scan.  It seems to be analyzed.  But there is no sign of an item scanned on my desktop which is where I selected the item scanned go.  I have a Macbook Air with OS 10.9.5

  It works!  Thank you very much.

  As you are a HP pro, maybe you can help me solve my second problem.  I have the HP Office Jet Pro 8500 connected to my Panasonic phone answering machine.  He used to work without fault.  When a call came, she was not picked up the appellant was able to leave a message. If a fax came the HP received the fax.  But recently, when a call comes in, the HP picks up, anticipating a fax, and the appellant was not able to leave a message.  Any suggestions?

• HP Officejet Pro 8500 Premium a scanned PDF files in legal format, but I want letter format

  Hi, I have an iMac with OS 10.7.5 and my Officejet Pro 8500 a Premium makes the computer scans that are of legal size, when well even the original is letter size. I don't see how to change this in the HP utility. I don't have a scanner software, because I was able to install HP. My doc driver does not work either. Any ideas? Thank you.

  Hey @JosieB,

  Welcome to the Forums of HP Support!

  I understand that you encounter, software, scanning and ADF questions on your HP Officejet Pro 8500 a Premium e-all-in-one printer. I would like to work with you today with the resolution of these problems. To make the resolution of the problems I will divide this post into three sections. Each section represents one of your problems. I know that in your message you can set your analysis of the rather than a legal letter and that you use the HP utility by scanning because your drivers and software HP does not able to install correctly on your Mac. I'll also provide you with steps to solve this issue.

  Question 1: The software installs:

  Please perform the steps below to properly install your HP software and drivers for your printer on your Mac OS X 10.7.5 Officejet operating system.

  Step 1: Uninstall the drivers and software:

  Uninstalling the printer software
  
  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  Please click the following link to download and install the appropriate drivers for your HP Officejet:

  HP full feature software and drivers - OS X Lion v10.7

  If you need installation assistance once the drivers are downloaded, please visit the 2 documents below.

  USB: Install Help for Mac OS X 10.7

  Wireless: install Help for Mac OS X 10.7

  Question 2: Could not parse the format letter:

  Once your software is installed properly your HP or HP Scan utility software parameters must be set correctly once more. Here is the HP document on how to Scan with the HP scanning and software without scanning your Mac computer HP software. The support document also explains how to change the settings for scanning.

  Scan from OS X Lion v10.7 with full software functionality HP for HP Multifunction printers

  Failure help, you can also try:

  1 open The HP utility and select your device.
  2. based on Scan Settings open the "Scan to computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click modify.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop-down list next to Cultures to and set as letter
  7. click OK and try to scan the image.

  Question No. 3: Automatic Document does not work:

  Finally, in order to get your ADF, work again on your product, that I will give you some detailed troubleshooting steps. Because you have not noticed if you having paper jam errors or that the product just will not pick up paper at all in the charger, I'll give you the steps of troubleshooting for both scenarios.

  One "original jam: clear jam and press OK"Message appears.

  More than one Page at a time is nourished by the all-in-one -please only through 'three Solution: clean the automatic document feeder' of this document.

  Please let me know if the steps I have provided to resolve your problems. Good luck!

• OfficeJet pro 8500: is my officejet pro 8500 store all scanned or copied information

  My Officejet pro 8500 dead.  Are there personal information stored in the printer I need to erase or destroy before recycling the machine?

  @No3putt, welcome to the Forums of HP,

  The printer may have stored recent incoming faxes in memory. You can restore the printer back to factory settings to delete all information.

  • Select the configuration Menu, tools, restore the settings by default, Yes.

  That should erase any information that you entered in the unit and you should be good to recycle!

  I hope this information helps you! If you want to thank me for my answer today, click on the below!

• OfficeJet Pro 8500: There is no driver for the Officejet Pro 8500 for Windows 10?

  Cannot find a driver for the Officejet Pro 8500 on Windows 10

  Former driver is blocked running.  Where is an updated driver?   Worked very well under Windows 8.1.

  Reinstall the driver of windows 8.

• Wireless HP Office Jet Pro 8500 - can not scan to computer

  I use a HP Office Jet 8500 Wireless and cannot "scan to computer".  When I select "scan to computer", I get a message (on the face of the printer) that says "refer to device documentation to troubleshoot issues.   I did everything in the troubleshooting guide, even if they do not address my problem, but anything done without success.  I am running Windows 7.

  Any suggestions?  Thanks for the help!

  Robin

  Destin, FL

  Hello Robin,.

  Thank you very much for your answers and your efforts! My sincerest apologies for not knowing that Windows 7 Professional 64 bit rested not with the tool! I learned something new from you and thank you so much for this!

  We can try level 3 or 4 uninstall manually, instead of running the tool. I understand that the tool would be the easiest method. Here are the steps for you.

  There are 2 ways you can run levels:

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open "Computer", and then right click on CD drive and open

  3 open the Util folder

  4 open the CCC folder

  5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. perform a clean boot

  9. run the download to reinstall the printer ( HP Officejet Pro Full Feature software and driver )

  If the software has been downloaded and extracted the download of the driver for your system:

  1. click on start and type %temp% in the search box, open the folder

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. perform the clean boot

  (9 download drivers and full software features HP Officejet Pro Full Feature software and driver )

  I really hope that does the trick!

  Happy Thursday

• Officejet Pro 8500 problem has scan (new)

  Mac 10.5.8 (Leopard, Snow Leopard no)

  I can't find any interface or driver for scanning, except the screen on the printer.

  Use of the screen, I have the choice of jpg and pdf (also by e-mail, but who do not need).

  Jpg: Gives Me a 200 dpi file that is only a part of 6 "x 4" of the page.

  PDF: Give me the whole page and I can "save under" a tiff file or anything else since Acrobat up to 1200 dpi, but the resolution is certainly not the 4800dpi promised in the specification of this machine. And there is no mention of the color depth.

  Where is the driver!

  I have never had a scanner that didn't come with a driver that could be imported into PhotoShop, offering an interface for different resolutions and cropping.

  Should I remove this printer?

  If so, is there an all-in-one that will scan photos properly?

  By the way, I was on the chat for a long time yesterday, because the yellow cartridge sunk and emptied at the time the implementation has been full. Cat person told me to call phone support today, but one of the service centres is down and the tree of phone hangs up on me.

  This is a very disappointing experience!

  Hello!

  Is that what you have already installed the printer software in your computer?

  If this isn't the case, run the disc that came with the printer and you will see the user interface for scanning.

  For more information, click on the link below.  It is precisely for your printer and the issue.  Good luck!

  http://support.HP.com/us-en/document/c02456650

  -claire

• HP Officejet Pro 8500: Pro 8500 has only scan full page

  Hello, for some reason, my scanner is missing at the bottom 2 inches of the page when I scann sheet A4.

  Hello
  
  Thank you for using the HP Forums.

  Are you using the Scan software after installing the software with FULL?

  Otherwise, you can install the FULL features software?

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Once you have installed the sfotware FULL of features, start the Scan software.  Follow the settings below to scan your document.

  

  Hope that helps!

• OfficeJet Pro 8500 has MAC OS10.7 any computer not detected in scan only mode

  From 23/10/2013, my HP Officejet Pro 8500 has in scan mode indicates "No computer detected" but print wireless without difficulty. I use a Mac Mini with OS10.7. The scan worked fine a few weeks ago. I suspect that the recent updates to Mac or HP caused this problem. All solutions?

  Hi barneyw,

  I want to help you with your problem of scanning. Follow the steps described in this document for a "no computer detected" Error Message is displayed during the scan.

  Let me know if this helped and feel free to contact me if you need further assistance.

  Thank you

• OfficeJet Pro 8500 909 a will not be re - install Mac 10.7.5

  I am very frustrated with this issue, I'll have. Here are the bullets:

  • Running Mac 10.7.5 (Lion).  Printer is connected to this computer through the USB port.
  • Has started to receive messages on my all-in-one HP OfficeJet Pro 8500 909 a scanning would work not and check the documentation for the aid.
  • While looking online and through some troubleshooting, I deleted my print printer to attempt to reinstall fees.

  The main problem I encounter is that I can't seem to re - install this printer no matter what I try.  Here's what I tried...

  • Tried to launch the HP (ver 2.3.15) CONFIGURATION UTILITY and DEVICE MANAGER HP (1.5.8) that was installed on this machine for the printer.  When going through the Setup utility, my device is not seen, so it is considered for a screen and then I invited me with a message that says that my device is not supported by the installer and I had to go to hp.com/support for more help.
  • When I go through SYS PREF > PRINT & FAX and try to click on the '+' to add a PRINTER, the printer never shows in the choice of 'default' as being same / connected.
  • When I go to find help on the support site, the indications only can I find tell me I should use for the Lion, update the Apple software to download the latest update (which I'm sure has already downloaded on this machine in the past).  Tried to restart my Mac, reboot and disconnect all the wires between the printer and Mac, to see if it would work the update of software this printer is connected.
  • I scoured the HP website to try to find the "utility installation hp for lion" install file, but it doesn't seem to be available as a manual download - each direction pointing right back on software updater.

  It is where I am at-I feel like I'm stuck in this small black hole where I can't use the HP Installer on this machine b/c it is too old and I can't download something 'new' of Apple Software Updater.  I did go to the Apple website and download the drivers for Mac OS x Mountain Lion & Lion. I have installed for this machine, restart and still nothing that shows this as a connected USB printer.

  Help, please.

  Chad

  Hi chadkafka,

  Follow the steps below

  1. check that your USB cable is good using a new

  2 open the system preferences and then right-click in the white area open. Select the Reset printing system

  Note: If you have installed other printers this will remove all printers in the print queue.

  3. open utility disk, then on your hard drive. Click on repair disk permissions

  4. connect the USB cable to a Mac and then select now, when it asks you to install the printer

  5. click on the apple icon Mac in the upper left corner and then run software update to reinstall the printer using the ASU.

  Let me know if you get the printer installed successfully?

• Re: There is no driver for the Officejet Pro 8500 for Windows 10?

  Tried to load the complete package of windows 8. did not work.  Tried it on 2 10 Windows - had already installed win10 and the other has been upgraded to win7.  I REALLY need to be able to scan.  Any suggestions out there?

  Thank you

  Welcome to the HP community @seamaster805,

  I came across your post about the problems you're having with installing drivers of Windows 8 on Windows 10, and I wanted to stop to help out.

  There are 10 Windows drivers available for your Officejet 8500, and you must install the full features drivers correct and the file of the software for it to work. See the image below and the link to get there. Try to install again and if you are having problems or errors during installation, let me know please and I will surely do my best to help you!

  • All-in-one printer, HP Officejet Pro 8500 - A909a

  

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Thank you

• OfficeJet Pro 8500 has more: document scanning

  Several pages to the computer and save it as a file, but now he won't, until Apple upgrades my Officejet Pro 8500 has more opportunity to scan the whole of a scan of the page at a time.

  How to scan a document of several pages under the name of a file?

  Hi @Pinnacleport,

  I read your post and to see that since the upgrade to El Capitan, you are no longer able to scan several copies of a file. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I checked the site and the drivers are installed by the Mac drivers preinstalled. HP printers - installing a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet Pro 8500 has more)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  What application are you using to scan with?

  The only way you can save several pages in a single file is in PDF format. JPEG and other formats will save multiple documents as separate pages. In the printing and scanning window, select PDF and check combine in one document below.

  I hope this helps. If there is anything else I can help you, let me know. Thank you.

• Duplex scanning possible HP Officejet Pro 8500 A909a Series?

  There are some online reports that the HP Officejet Pro 8500 (withount wlan functionality) supports the duplex scanning. However, I can't understand how this. Does anyone know if duplex analysis is supported for my HP Officejet Pro 8500 A909a?

  See you soon

  Karsten

  Sorry, the 8500 a909a DOES NOT print DUPLEX. MORE than 8600 and the PREMIUM 8600 don't.