HP PROBOOK 450 G2 I7: "HP PROBOOK 450 G2 I7" does support virtualization technology?

Similar Questions

• 4730 proBook s: what version of the BIOS allows the activation of virtualization technologies?

  I use Oracle VirtualBox with 7 VM Linux on my ProBook 4730 of s (OS is Windows 7 64 bit). Somewhere around the BIOS update F.20 my machines virtual Linux no longer works, because of virtualization technology has not been enabled in the BIOS. I tried to enable it in the BIOS settings, but he refused to be activated. So I followed the instructions to return to the correct known copy last BIOS on the recovery partition, and yet I could not enable Virtualization Technology in the older BIOS revision.

  Then I went the drivers and software from the HP Web site section for my ProBook and downloaded the revision of BIOS Feb 2011 (apparently the earliest possible review of BIOS for my laptop model) and then flashed my BIOS with this revision. And virtualization technology setting STILL refused to activate it.

  I've seen in this thread in HP forums:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-ProBook-4730s-BIOS-cannot-enable-virt...

  anyone else with the model of my laptop had the same problem and the same symptoms: VMs worked up to a point in time and at that time there the Virt. Technology implementation option in the BIOS could not be reactivated.

  So my two questions are:

  Any available for this model of laptop BIOS revision allows the activation of the option of setting of virtualization technology?

  and,

  In the event of a revision, which one is it and can provide you a link where I can find a downloadable copy of it?

  LTW

  OK, after you call the tech support of HP, I found the answer to my version of this problem. When I tried to activate the virtualization technology in the BIOS, I was logging in BIOS using my account in the BIOS. At least for me (and probably for others too, since it is advice from HP support gave me) it was bad. You must log in with the account Guest User of the BIOS BIOS, and when you do, a lot of parameters of the BIOS, including virtualization technology, can be turned on/off. So my problem is solved.

• 4730 proBook s: Ce that enables hardware virtualization

  Hello

  I do a course that asks me to run VirtualBox with OS 64-bit with her. Problem is necessary turn on hardware virtualization through the BiOs for this and I am not able to do this. I'm running a Probook 4730 of s with 64-bit, Sandy Bridge Chipset BiOs F.30 worm 68SRR running Windows 10.

  I checked the box of virtualization technology in the device Configuration menu and changed the virtualization technology menu item to change the menu Set Security Level. I even went and disabled the component of Hyper-V in the menu of Windows functions like VirtualBox told me too.

  Any help would be greatly appreiciated because it slows down my ability to do my course work down.

  Thanks in advance for any help.

  Chris.

  Hi erico,.

  I solved it. I had to update the BiOs and now it has activated. Seems that the latest BiOs it did not support.

• Hello.. I have laptop (hp probook 4520 s), keyboardis does not.

  Hello.. I have laptop (hp probook 4520 s), keyboardis does not. only the letters 'B' and 'n' How do I reactivate? because when I use a keyboard external usb it works? Help, please

  Helder salvation,

  Did you of recent changes made to your computer?

  We will reinstall the internal keyboard drivers and check.
  
  a. click Start, type Control Panel in the search box, press enter, click System, click Device Manager, click on keyboard.
  b. you should find the internal keyboard part as well as any external keyboard used.
  c. right-click on the keyboard integrated in the list, click on uninstall.
  d. unplug the external keyboard.
  e. restart the computer and check if the keyboard internal works.

  Since the external USB keyboard works, if drivers did not fix the internal keyboard problem, I suggest you to contact the manufacturer to check if there is a hardware problem.

  Hope the above information helps.

• does support wireless dual band (2.4 GHz and 5 GHz) in the hp probook 450 - g2

  Model: Hp Probook 450 - G2

  Please confirm the support of platinum rating book Wi - Fi the below mentioned criteria?

  • A Wi - Fi connection must support dual band (2.4 GHz and 5 GHz)
  • Support 802. 11A, 11b, 11 g, and 11n IEEE standard
  • It must have the ability to set roaming aggressiveness
  • It should support WMM (Wireless multimedia)
  • He must have a configurable protection as RTS/CTS mechanism

  Hello

  Yes and no, can't confirm because hp probook 450 - G2 may have many options. See the following list:

  http://h20195.www2.HP.com/v2/GetPDF.aspx/c04336794.PDF

  Kind regards.

• ProBook 450 G2: password does not work when you try to open a session.

  I've been connecting to my laptop with the same password for several months now and then a few days ago, I tried and it wouldn't let me, it came up with an error message saying offline.

  The password was absolutely correct and checked caps lock shift was not on.

  Via the internet on the phone, connected to the microsoft site (with the usual password) account and it let me in.  From there amended past just in case.

  New password I tried and it does not always help.

  Having read several support elements and that you have tried various things but none have worked so far.

  They say to press the windows key, and then R to get the settings but that is impossible unless connected, which can not do.

  Any help / suggestions would be greatly appreciated.

  Hello

  It may be worth trying the following.

  Firstly, an electrician from the laptop to the router/access point.

  One when you're done, start Notepad and in the log on screen, click the accessibility icon in the lower right corner, select on-screen keyboard and enter your password using this.

  Kind regards

  DP - K

• HP Probook 450: Biometric feature does not

  Biometric authentication is not working properly, when I log in I get a message that says that the HP security tools. I HAV to connect without biometric features or wait 30 seconds and guest starts again. I've always done the finger swipe use as proof of identity, and after update, I can't even reset my settings to the biometric parameters.

  Please help me solve this problem, it's annoying to type complete password all the time before the opening of the session, or opening screen once it was disconnected.

  Thank you

  J

  Try to upgrade your HP ProtectTools for the latest version of HP customer Security Manager (HP ProtectTools rembranded), SoftPaq 68157, at: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68157.exe

• ProBook 4320 s: computer does not turn off

  Hello

  A few days after the last update of window 10 s can not turn off.

  She can go sleep, but turn off the result probook on reboot.

  Ask for advice

  Tanks

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• HP ProBook 470 G1: Recommendations HP Support Assistant

  HPSA has recently informed me that it is recommended I have install the following SoftPaq: SP64824, SP67047, SP68293, SP63779 and SP66915 on my ProBook 470 G1 laptop. When I try to use HPSA application to download and install the SP, downloads take forever and eventually crash or download timeout. I searched on HP support download page in vain to find MS above to try and download and upgrade and do not use the HPSA application. Can someone direct me to where I can find of MS above driver to download directly on the site of HP?

  Looks like a glitch in HPSA. I searched several of these MS and found nothing. They can even be SP who were fired for one reason or another. Not sure why HPSA is always 'return' as available.

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• ProBook 4530 s bluetooth does not

  I bought a HP Probook s 4530. The saleswoman told me that it is the bluetooth device. The original operating system installed on it was LINUX. But since I change the OS Win 7 Ultimate, I had to install the drivers from scratch. I got a few pilot installation of the saleswoman files and down them. But now on the Device Manager there is an exclamation point on the bluetooth device and there the error "Windows has stopped this device because it has reported problems. (Code 43) ». What can I do to fix this?

  Thank you

  At the start, press the F10 key to start the installation of the BIOS.

  Go to system-> Options of the integrated device Configurations.

  Check there he activated two things. State of the button wireless and built-in WLAN adapter.

  If not then allow them, save the new settings, exit the BIOS and boot the operating system.

  Download and install the software Framework HP here and restart the system.

  Download and install from here HP connection manager and restart the system.

  Check the color of the LED on the key to wireless communication.

  If it has:

  • Amber (as pictured below) all wireless devices are now closed. Press this key to change to white.

    ->  

  • White (as pictured below), the wireless device integrated, as a local area network (WLAN) wireless device or a Bluetooth® device, is on. Status is ok, so you can go to the next step.

  

  Click on start button.

  Type in the search, filed " hp connection " and choose " HP Connection Manager ".

  

  Check the status of the Bluetooth module. If it has:

  • 'Off' then make a right click the switch on the button which is pointed to by the arrow on the image below.
    When you change the State to "On" and integrated Windows 7 driver will install, and after that, you will have to reinstall again Qualcomm Atheros Bluetooth driver here.

  

  • 'On' then the module Bluetooth is working properly and should be listed in Device Manager.

  

  • are not in the application HP Connection Manager then your model has no integrated Bluetooth module and Bluetooth driver should be uninstalled.

• Why my 4530 ProBook s (64-bit) does not have a virtual 64-bit machine?

  I have a new ProBook 4530 s and it seems to be an email from HP support for it yet...

  I'm in a seminar of the Technical Conference and we are supposed to install a virtual machine under VMWare image.

  This system is 64-bit and it is running 64-bit Windows 7 Pro, but when I try to start the virtual machine it gives an error-

  "Virtualization software is incompatible with the long mode on this platform. Long mode off. "The virtual machine image

  does not start.

  The VMWare help page says that the problem may be with BIOS. Any help?

  Had is actually * two * place.

  I changed in the Configuration of the device, rebooted, still no joy.

  Is returned in the BIOS, searched and found a changed if framework in terms of safety, from the view to change.

  Restarted, it works!

  Thank you!

• ProBook 4720 s bluetooth does not

  My ProBook is only week old and today I tried to connect my bluetooth, Razer, and Kensington, mouse to him. Laptop recognizes them, they appear under the devices section, but are completely unusable - cursor will not move. Then tried to connect my phone Nokia and Sony Ericsson phone and same thing - they appear under the devices section, but I can't send/receive files. Don't get message "no service found" under properties for mouse and phones appear also no bluetooth service.

  I have the Broadcom 2070 bluetooth USB\VID_0A5C & PID_21B4 & REV_0481 device hardware ID.

  I started with Ubuntu live cd and also same thing happens, devices not detected but do not work

  I am pleased to announce that I have solved this problem I started to try all the listed drivers manually and I got it work Yeheyyy, I'm so happy I have no idea are drivers now my real card drivers or not... I guess not... but as they work, I don't touch any more - they say Broadcom 2046 2.1 EDR USB. Weird stuff. All I changed in my system, upgrade to Windows 7 SP1 before you try my bluetooth devices...

• HP ProBook 4530 s Quickweb does not

  HP ProBook 4530 s

  Windows 7 Edition Home Premium 64-bit

  The BIOS 501 error

  I have Installled Windows 7 on drive C: (NTFS)

  then installed QuickWeb.

  Tried to use QuickWeb gives error BIOS 501

  then installed on drive (FAT32) tools Hp QuickWeb

  Once again same error Bios 501

  Can't understand the problem can someone help me...

  Thank you very much in advance.

  Welcome to the HP Forum!

  dbk3110 wrote:

  HP ProBook 4530 s

  Windows 7 Edition Home Premium 64-bit

  The BIOS 501 error

  I have Installled Windows 7 on drive C: (NTFS)

  then installed QuickWeb.

  Tried to use QuickWeb gives error BIOS 501

  then installed on drive (FAT32) tools Hp QuickWeb

  Once again same error Bios 501

  Can't understand the problem can someone help me...

  Thank you very much in advance.

  You said that you have installed Windows 7 in the C: partition

  Was that a factory image install via the Recovery Manager, or was it a facility own fom a Microsoft dvd installation?

  The error you are getting means that the UEFI system partition problems. Can still call you the Diagnostic tools to the power upward with the F2 key? If this isn't the case, you must reinstall UEFI. Follow the installation instructions.

  The software is available here at the web support portal users for your ProBook s 4530..

  Kind regards
  ERICO

• HP Probook 4520 s screen does not do anything...

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  Fassi wrote:

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  In a dark room, boot up your laptop and shine a flashlight on the LCD screen.

  If you see a very dark Windows desktop, then you have the chance.

  The backlight inverter has failed and must be replaced. If you are a kind of DIY user, then this is a repair at low cost. If this is not the case, have done so in a store could cost @ $75.00.

  If you still don't see anything then the LCD failed. It is a more expensive repair.

  If your laptop is still within its warranty period, it's time to Contact HP warranty repair service.

  Best regards
  ERICO