HP ProOne 600 G1 AIO

Similar Questions

• ProOne 600 HP: HP ProOne update BIOS

  My AiO computer got a SMBIOS LO1 v02.59 version. Last week I received a message before the start that this version is obsolete and will be replaced by a new version of v02.64 (?). I said yes to this and the download has started, updated and restarted the computer. However, the next morning, when I start my computer, I get the same message again and the process starts again. This has happened for almost a week now and I can't see the end. update the comouter takes another program, that I HAV missed earlier, or what?

  I would really appreciate some help here.

  Tjabbe

  Hey Make,

  I followed your last statement and downloaded the file directly from HP. My computer always tells me I have the old version, but it does not download the file more, so I guess he got in there. It works also without any problems, so as much as I fear that the problem has been resolved. Thanks for your help.

  Kind regards

  Tjabbe

• How can I convert a 3 mV/V to a load cell signal to something I can read using a field point AIO-600?

  I use an external powere supply 12V to supply voltage to the load cell, and I'm reading data using AIO-600. There is a separate module that can do this, but is it possible to do it with the current material?

  Russell,

  The lowest input for the AIO-600 range is 0 - 6V.  This means that you will have a resolution of 12 bits (11.3 effective) broadcast more than 6 volts.  I guess that your full scale signal max will be 36mV.  Without amplification, you will not have a very high quality signal.  It would be the best bet to amplify your output signal mV as close to the load as possible cell and then connect this signal amplified to your AIO-600.

  Best,

  Chris LS

• AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

  Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

  Hello:

  See run the resolutions listed in the link below the job for you.

  https://support.Microsoft.com/en-us/KB/314060

  #3 or #5 usually work.

• 600 proOne G2: invalid function byte - CRC fail

  It seems my featurebyte works not with a Virgin motherboard who already accept to save the series, product, version identifier, etc. CTnumber.

  I tried the combination of upper-lower case, update the bios but no luck

  could someone has an idea about that

  Have byte = 2U3E 3 X 47 5K6J 6S6b 7H7M 7Q7S 7W7a 7m7s aBap aqau b7bm dUdp dq .qG

  PS: I copied partsurfer and it aligns with the sticker on the body as well

  TAI

  RajGeo

  Dear mdklassen,

  Thanks again.

  Have solved the problem by copying featurebyte Simulator of Service Media Library of the bios.

  Ask again why they put wrong sticker on PC, but also Partsurfer.

  the characteristic right byte is

  2U3E3X47676J6S6b727B7H7M7R7S7W7m7saBb3da.3Y

  Cheers...

  REDA

• 400 proOne G2: BSOD when I sysprep ProOne 400 G2 with Windows 10

  Hello

  I have a question I've been working on these past few weeks with no result. I have two HP ProOne 400 G2 that makes Blue Screen of Death, whenever I have run Sysprep on them. I got installed and sysprep with Windows 8.1, but with Windows 10 computers it crashing whenever I try.

  PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_PCIEXPRESS

  I assume this has something to do with a bad driver for a device connected to the BUS PCIExpress, but don't know what to do from here.

  I get the following in my analysis of the BSOD:

  Windows Kernel Version 10586 MP (2 processors) 10 free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 10586.0.amd64fre.th2_release.151029 - 1700
  Computer name:
  Core = 0xfffff801 '02e7f000 PsLoadedModuleList = 0xfffff801' 0315dcb0
  The debugging session: Wed Jan 14 11:35:23.343 2016 (UTC + 01:00)
  System Uptime: 0 days 0:27:03.005

  Ebugging details:
  ------------------

  DUMP_CLASS: 1

  DUMP_QUALIFIER: 400

  BUILD_VERSION_STRING: 10586.0.amd64fre.th2_release.151029 - 1700

  SYSTEM_MANUFACTURER: HP

  SYSTEM_PRODUCT_NAME: HP ProOne G2 400 20 inch Touch AiO

  SYSTEM_SKU: L3N70AV

  BIOS_VENDOR: HP

  BIOS_VERSION: N13 worm. 02.02

  BIOS_DATE: 12/11/2015

  BASEBOARD_MANUFACTURER: HP

  BASEBOARD_PRODUCT: 8063

  BASEBOARD_VERSION: KBC Version 05.26

  DUMP_TYPE: 2

  BUGCHECK_P1: 4

  BUGCHECK_P2: ffffe00025cbc038

  BUGCHECK_P3: 0

  BUGCHECK_P4: 0

  BUGCHECK_STR: 0x124_GenuineIntel

  CPU_COUNT: 2

  CPU_MHZ: b58

  CPU_VENDOR: GenuineIntel

  CPU_FAMILY: 6

  CPU_MODEL: 5th

  CPU_STEPPING: 3

  CPU_MICROCODE: 6, 5, 3, 0 (F, M, S, R) GIS: 49'00000000 (cache) 49'00000000 (init)

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: svchost.exe

  CURRENT_IRQL: 5

  ANALYSIS_SESSION_HOST: TNI - PC2

  ANALYSIS_SESSION_TIME: 28/01/2016 09:26:11.0835

  ANALYSIS_VERSION: 10.0.10586.567 amd64fre

  STACK_TEXT:
  ffffd001 'a3529e08 fffff801' 02e41f1f: 00000000'00000124 00000000'00000004 ffffe000'25cbc038 00000000' 00000000: nt! KeBugCheckEx
  ffffd001 'a3529e10 fffff801' 0308fe88: ffffe000 ' 25cbc038 ffffe000 '25d0ca98 ffffe000' 25d0ca98 ffffe000 ' 25d275c0: hal! HalBugCheckSystem + 0xcf
  ffffd001 'a3529e50 fffff800' acb08838: ffffe000 00000000'00000750 00000000'00000000 ' 25d0ca04 ffffe000'27994010: nt! WheaReportHwError + 0 x 258
  ffffd001 'a3529eb0 fffff800' acb015c2: ffffd001 ' 9eff6c80 ffffd001 'a3529f50 ffffd001' a34f1180 ffffe000 ' 24add200: pci! ExpressRootPortAerInterruptRoutine + 0x24c
  ffffd001 'a3529f10 fffff801' 02e83387: ffffd001 '9eff6c80 00000000' ffff6dd1 00000000' 158aa449 00000000'00000010: pci! ExpressRootPortInterruptRoutine + 0 x 22
  ffffd001'a3529f70 fffff801'02 fc 2168: ffffd001 '9eff6c80 ffffe000' 27a 49040 00000000' 000001ba ffffe000'27414440: nt! KiCallInterruptServiceRoutine + 0 x 87
  ffffd001 'a3529fb0 fffff801' 02fc23f7: 00000000'00000000 00000000'00000001 fffff801 00000000' 0000002f'0319 c 180: nt! KiInterruptSubDispatch + 0 x 108
  ffffd001 'a9ca5490 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiInterruptDispatch + 0 x 37

  STACK_COMMAND: kb

  THREAD_SHA1_HASH_MOD_FUNC: 0e50fe8fa1ecf43925e43bd200d7bb6400cb19fc

  THREAD_SHA1_HASH_MOD_FUNC_OFFSET: b3258f674ee33805ab3940241ac9889fab704dc3

  THREAD_SHA1_HASH_MOD: 7ec0dd05e870653df55cacfdf5a6b10cad863ce2

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: GenuineIntel

  Nom_image: GenuineIntel

  DEBUG_FLR_IMAGE_TIMESTAMP: 0

  IMAGE_VERSION:

  FAILURE_BUCKET_ID: 0x124_GenuineIntel_PCIEXPRESS

  BUCKET_ID: 0x124_GenuineIntel_PCIEXPRESS

  PRIMARY_PROBLEM_CLASS: 0x124_GenuineIntel_PCIEXPRESS

  TARGET_TIME: 2016-01 - 14 T 10: 35:23.000Z

  OSBUILD: 10586

  OSSERVICEPACK: 0

  SERVICEPACK_NUMBER: 0

  OS_REVISION: 0

  SUITE_MASK: 272

  PRODUCT_TYPE: 1

  OSPLATFORM_TYPE: x 64

  OSNAME: Windows 10

  OSEDITION: Windows 10 WinNt TerminalServer SingleUserTS

  OS_LOCALE:

  USER_LCID: 0

  OSBUILD_TIMESTAMP: 2015-10-30 03:15:45

  BUILDDATESTAMP_STR: 151029-1700

  BUILDLAB_STR: th2_release

  BUILDOSVER_STR: 10.0.10586.0.amd64fre.th2_release.151029 - 1700

  ANALYSIS_SESSION_ELAPSED_TIME: 6261

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0x124_genuineintel_pciexpress

  FAILURE_ID_HASH: {0aebd40d-d4c8-456d-b299-4fede7e8bf0c}

  Best regards

  Thomas

  Best regards
  
  Thomas
  http://www.techwork.dk

  Hello

  HP has a solution for me and are working on a new BIOS to correct the problem of permanence.

  Go to the configuration of the BIOS F10-> advanced-> System Options-> and uncheck 'allow PCIe/PCI SERR # Interrupt.

  Then, you are able to run Sysprep without blue screen of death.

  I see that HP has released a new BIOS version 02.03 last month. You might want to try everything first, but if not, try the above solution.

  Best regards

  Thomas

• repair for HP touchsmart 600-1350

  Hello, everyone-

  I have a HP Touchsmart 600-1350 with what is considered as a default card mother Pegatron IMPIP-M5.  I am told that HP has no available replacement parts and that I should just throw this PC and buy a new computer.  This seems a little extreme and am looking for a second opinion.

  Please share with me your experiences related to this topic.

  Thank you...

  ButchBob-

  Hello

  Computer TS/AIO uses a card mother desktp normal, it uses a very similar motherboard for laptop. If you wish, you can get all the parts for your machine from the following link. You can buy here (if available) or use the part number to find online like eBay stores.

  http://PartSurfer.HP.com/search.aspx?SearchText=BT554AA

  Kind regards.

• Smart touch mouse problem 600-1370

  My HP TouchSmart 600-1370, wireless mouse is having problem and I have to restart the system to make it function again, then it works for a while and then the problem continues. I changed the battery, unplug the receiver and resynchronize the mouse

  and none of these help, I wondered, that the problem may not be in the mouse itself otherwise why reboot it can heal for quite awhile and I need help, thanks

  Hello wang66:

  Welcome to Hp on the Support Forum. Please goto a store and buy a keyboard and USB mouse real cheep if you don't have an old around back upward. As in this case. If your keyboard still works then just by a mouse. Rite Aid wear them to about $10.00 a USB mouse. This you'll get until you get your game of mouse and keyboard from HP parts store replacement. The manufactured integrated mouse program mouse is corrupt. Check the status of your warranty to see if your computer is still under warranty. HP will replace for free if so.  If your computer is under warranty, contact HP direct assistance. If it is not then goto HP parts store. http://h20141.www2.HP.com/hpparts/default.aspx?cc=us&lang=en here is the information that you will need the mouse and the keyboard value HP sent me for my replacement of my box.

  EH0B6035 RL:R6 - 11 B 2 P/N0K03 - 0066 H 2 AIO WL BEARCAT/ELARA U.S.

  P/N 511400-ZH1 REV:A1.1 S / N [personal information deleted] CT: BBEWLOALWZE2NO

  What exact number you need I don't know if I've provided all the numbers. Unfortunately, we cannot repair the software damaged in the mouse, keyboard or Blue Tooth device complete is a way to replace all three pieces together ok. So when you get your new game don't forget to replace all things together. Each one is programmed to perform as a whole. Is not working properly if you use a part of your old game because it is impossible to tell where the corruption is at. For now, my keyboard has become corrupted and my mouse worked fine, but I had to replace everything as a whole.  Please click on Bravo if this solves your problem. Thank you frrw.

• kernel_task runaway (from 300 to 600%) CPU with 2 external displays

  I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

  Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

  Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

  Any ideas on how to fix this resumption of kernel_task of all my CPU?

  I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-25 14:24:02

  Download EtreCheck from https://etrecheck.com

  Time 07:59

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Hardware Information: ⓘ

  MacBook Pro (retina, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 242

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Color LCD 3840 x 2400

  LED Cinema Display 2560 x 1440

  Thunderbolt Display 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

  Disc information: ⓘ

  APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Boromir (disk1) /: 499,05 (Go 140,24 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: ⓘ

  / etc/sudoers, 2299 but file size expected 1563

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Beats Updater.app

  com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

  /Applications/proxifier.app

  [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

  / System/Library/Extensions

  [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

  Startup items: ⓘ

  TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 156 jobs

  [running] Apple 108 jobs

  Launch system demons: ⓘ

  [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

  [no charge] 41 tasks of Apple

  [loading] 153 jobs Apple

  tasks of Apple 109 [performance]

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

  [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

  com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

  com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

  com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

  [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

  User launch officers: ⓘ

  com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

  com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  HWMonitor Application (/ Applications/HWMonitor.app)

  Hidden CPULed Application (/ Applications/CPULed.app)

  Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

  Beats Updater Application (/ Applications/bat Updater.app)

  Hidden NET Monitor Application (/ Applications/Net Monitor.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

  User Plug-ins internet: ⓘ

  WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

  Safari extensions: ⓘ

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

  3rd party preference panes: ⓘ

  Backblaze backup (2016-07-11) [Support]

  Flash Player (2016-08-29) [Support]

  FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

  Java (2016-08-18) [Support]

  MagicPrefs (2016-01-20) [Support]

  MenuMeters (2014-10-22) [Support]

  TiVo Desktop (2009-11-23) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Boromir: Disc size: 499,05 GB disc used: 358,81 GB

  Destinations:

  Frodo Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 09/09/16, 02:09

  Last backup: 25/09/16, 11:49

  Backup disk size: too small

  Backup size GB 999,86 < (disc 358,81 GB X 3)

  Top of page process CPU: ⓘ

  345% kernel_task

  56% Information System

  44% cloudphotosd

  42% iTunesCacheExtension

  30% activity monitor

  Top of page process of memory: ⓘ

  1.44 GB kernel_task

  1.18 GB com.apple.WebKit.WebContent (6)

  786 MB mds_stores

  590 MB bztransmit

  Mdworker (18) 492 MB

  Virtual memory information: ⓘ

  256 MB of free RAM

  4 pm used GB RAM (5.96 GB being cached)

  768 KB used Swap

  Diagnostic information: ⓘ

  25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

  /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

  25 sep, 2016, 13:06:44 test - passed

  September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

  com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

  Start safe mode, use this way and see if the problem is recurring

• macOS Sierra intermittently detects only 2nd screen at 800 x 600 when you reconnect

  At work, I use a mid 2014 MacBook Pro retina 15 inch connected to two screens Thunderbolt.  One of the screens Thunderbolt is chained to each other through stroke, and then connect to with love at first sight.

  Normally throughout my day I disconnect and using my computer laptop away from my desk, but when I go back to my office, I usually use my MBP with the lid closed and just use both screens Thunderbolt.

  Despite this historically configuration works fine, after a senior officer to macOS Sierra 10.12 I met a problem when my laptop wakes up after his Thunderbolt poster.

  A screen will boot correctly at 2560 x 1440, but another display will not work at 800 x 600.  If I try and manually adjust the settings of resolution for screens, I can only select 800 x 600 for posting done.

  The MBP has two ports Thunderbolt, and if I change the port on which the pair of screens is two connected, the forced swaps of 800 x 600 monitor.  Anyway, once the problem starts, I'm stuck with an abnormal low resolution screens.

  If I disconnect the two screens, one of them, then reconnect their power cycle, I still have the issue.

  If I open or close the lid of the MBP, screen MBP works at normal resolution, but I still have the issue.

  The only solution I've found now is to restart my MBP.  Then the screens work normally.

  So far, this question seems intermittent, but I met it 4 times this week since the upgrade.

  Hello, Hello 165dB!

  Thank you for joining the communities Support from Apple! Looks like that or have problems running on exnternal Thunderbolt displays the MacBook Pro. Read this article for steps to get help with graphics issues on external displays connected to your Mac. It has some great, you can try to see if you can get the second screen works properly.

  Another option you can try is in this article: How to test a problem in another user on your Mac account. This will allow you to check to see if the problem is specific to the user or the system-wide.

  Kind regards.

• What is the most recommended aio Printer Printer wireless?

  I have an old one I have Mac, using 10.8.5, I Pad 2, I have 5 phone. Liked my old aio Kodak but you want a printer affordable wi - fi. The old HP printers ink costs were outrageous! Now, I'm a bit wary of HP.

  List of Apple AirPrint printers - topic AirPrint - Apple Support

• It is typical that firefox can use 339 600 K (shown on the Task Manager and seemed to work) to show an image? My entire system freezes when that happens

  I was looking at pictures in an e-mail, (PDF), and firefox is running 339 600 K and froze my system. Is this typical? He just kept which passes I waited, however, the screen turned gray (with e-mail showing under) and after about 15 minutes, I decided that was pretty long and updated version of the browser (or the arrow from small circle). Then I could do it again, but it kept happening on every third image.
  Thanks in advance for your advice

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Firefox using too much memory (RAM) - how to fix
  This article describes how to make Firefox use less memory to make it run faster and prevent accidents.

  https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster

  https://support.Mozilla.org/en-us/KB/Firefox-uses-too-many-CPU-resources-how-fix

  https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding

• TBird 31.7, import Eudora Pro 600 mailboxes matter only 64, as well as in the box. need 600 all, how?

  I'm upgrading to Eudora 7.1.0.9 for Mozilla Thunderbird 38 Pro. Found that I have to install FIRST 31.7 TBird, in order to import "all" my old Eudora Pro boxes mailbox. Installed to 31.7 TBird, attempted to import boxes mailbox. Import worked... for a while, then everything just stopped. Count the imported mailboxes, only 64 600 have been migrated. How can I move the 536 other mailboxes? I need all of them! I tried to re - import, but import only caught about 20 before crashing on the desktop. AND the 20 mailboxes, he caught were the same as the top 20 of the 64 mailboxes that had already been imported. I tried to delete these boxes to the 64 letters from the former location of Eudora Pro, then tried to import again, but only caught importing the "In.mbx' (which had been imported in the first importation). Why import feature does not see the 536 other mailboxes? Is there a MANUAL way just copy/paste the mailbox store as long as the new location is, and have Mozilla automatically recognize them?

  HOLY GETOUTTATOWN! IT WORKED! Apparently, I was the incorrect option 'import '. I finally just selected < ImportExportTools > < import an mbx > and was given several options, so I chose < select a directory where the research of the mbox file to import > and just picked my EudoraConverted directory. Thunderbird should not think for about 40 seconds, and ALL the boxes of letters popped up. It took maybe another 30 seconds for all messages to fill all of the mailboxes. FWIW, the conversion was more than 120,000 messages in mailboxes on the 497. And they seem to ALL have presented, although I still test at random. THANKS for all your help. Now for TBird 1.5 upgrade to the current version! Thank you, once again! Problem solved!

• I teach a cardio dance class on the inside and I can't give them a many exact calories when class ends.  The only choice is on the Apple Watch is the 'other' and I know that the class Burns 600 calories in an hour, but my watch shows only 250-350 burned. 

  I use my Apple Watch throughout the day and when I teach a cardio dance class, the number of calories is MUCH lower than other materials.  Why is the Watch not count my calories accurately?  The ladies like to know the calories to burn when the class is over and I can't give them using my Apple Watch.  Others in this class that wear the watch tells you how many is not too accurate.  We burn usually about 600 + calories and I'll be happy if my registers 350.  What could be wrong? Thank you!

  Hello

  Do not forget that Apple Watch uses Active calories (those who are burned by orders or travel) as the main measure for the app to training and activity app.

  Many other applications of fitness / devices report total calories, which consists of active calories + calories at rest (that your body is still burning even when you're not active).

  More information:

  Use the activity on your Apple Watch - Apple Support

• HP Pavilion AIO: Camera stopped working for windows welcome

  The new AIO Pavilion came back with Windows 10 months and I used facial recognition to open a session.  All fine until 1 week ago, when the home screen says now "preparing...". "and"can't turn to the camera. Use the PIn to connect.

  If I go into RealSense, the camera works very well.  Windows settings for the camera are all lit, so nothing seems to have changed.

  What is a recent update of Windows 10 which changed the signal to the camera?  If so, how I restire it?

  Hi there @DavidG6,

  That the Forums are with you!  I understand that your web camera does not work properly for connection purposes.  I'm happy to help you with this.

  Assuming that it could be a recent update of Windows 10 which is the culprit, you can try using a computers HP - use Microsoft System Restore (Windows, 10, 8) to return to the level of before the problem appeared and see if it works now.  If so, then it is likely a change in software to your system.  Once you have determined that, then you can check: How to prevent Windows 10 to automatically download updated -howtogeek.com, prevent this set of updates.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.