HP PSC 1510 not recognized and no installation disc

Similar Questions

• Seagate Barracuda disc not recognized by Win7 installation disc

  Hello!  I'm trying to get and set the password on Aspire M34706 brother, who uses a Seagate Barracuda ST3500413AS hard drive.  (Yes, I know, it should have a password recovery disk, but does not.)  This player is driven by the firmware of the bus and doesn't seem to have a driver software available.

  The problem I have is, I can't seem to find the driver file or equivalent for this disc, or a software driver I could load from a removable media.  So I can't answer or edit user, not through msconfig.exe, do not use a recovery program, nada.  I get in what concerns the 'load drivers", so I'm stuck.  I can view the contents of the hard drive, but I don't know the path or the name of the driver that I need to load.

  Anyone have any idea of the file name and path (in a standard-issue of Win 7 Acer OEM installation)?  Or any other idea how to access the necessary file?

  Hi, guys and girls!  I managed to solve my problem without having to do a restore.

  After much searching the Acer site, I found packets of driver, zipped, current drivers for all their models of computers over the last 3 years.  I downloaded, unpacked to a flash drive, booted from the installation disc of Win7 drivers flash player, and after all that, with a minor hack, has been able to activate the hidden administrator account and use it to reset the password for my brother.  This last part lasted only 10 minutes.

  The problem of not being able to write to the hard disk was because my brother does not run the firmware upgrade for the main bus, which I have now taken care of.  So now I'm a happy camper, he is a happy camper and all right.

  That's all, just letting you know in the case of someone of another encounter a similar hard drive problem: full driver packages are available from Acer tech support site, just search on your specific model number.

• To start my usual login was not recognized and I was asked if I wanted to have my personal settings configured

  To start my usual login was not recognized and I was asked if I wanted to have my personal settings configured.  I was given 30 seconds to decide, and I clicked on YES.  Now when I connect using my name and my regular password, I don't have access to my emails in Outlook Express or my documents. I tried RESTORE but it did not work.  How can I get my personal settings?

  I use my wife's computer to ask this question because I can access is no longer my internet connection.  The system took me back to the State of the implementation for the first time as if I use a new computer.  How can I go back to shoot to the top of the computer with my usual settings?  I use Windows XP on a laptop Compaq nx7400.  (Got!) broadband using a modem and a telephone line.

  This sounds like your profile become corrupt.  There are a few sections that deal to recover a damaged profile:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  "How to use the Inbox repair tools to recover e-mail messages in Outlook 2002, Outlook 2003 and Outlook 2007"
    <>http://support.Microsoft.com/kb/287497 >

  HTH,
  JW

• Support for Microsofts and printer is not recognized and said that it must be declared

  Original title: Declare the printer in vb

  Hello

  Follow-up

  HOW to: Trigger and control Visual Basic print dialog boxes

  Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared

  Thank you

  Dan

  Hi Daniel,.

  Thanks for posting your query in Microsoft Community.

  I appreciate the effort you have taken to solve this problem yourself.

  This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you.

• I am a student and purchased the student for an annual subscription, but CC edition is not recognized and asking me to subscribe. I need to connect to the account of the student for my personal account.

  I am a student and purchased the student for an annual subscription, but CC edition is not recognized and asking me to subscribe. I need to link the student account to my personal account.

  Hi bridgettea37560549,

  You must use your e-mail address student account with which you made the purchase.

  You can follow the steps as https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Let us know if this helps!

  Kind regards

  Aurélie hamadi

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• HP PSC 1210v: HP PSC 1210v not recognized as a printer after upgrade Windows 10

  I have a HP 15 TS laptop that was purchased with Windows 8.  My printer is a HP PSC 1210v all-in-one and it worked fine with windows 8.  After upgrade my PC to windows 10, this printer will no longer be recognized by the PC as a printer.

  This printer is connected via a USB cable.  When I discovered the devices, it appears as "HP 1200 series" in connected devices.  When I discovered the "devices and printers" it appears in the category "unspecified" as "HP 1200 series", but not in the category 'printers '.

  Hi @dfeen8200,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and now your HP PSC 1210v is no longer recognized, and is not listed in the devices and printers.

  I would like you to take a look here: installation and using the built-in Windows print driver

  & Have a look here:

  Guide to upgrade Windows 10 for HP printers

  I hope all is well!

• HP Pavilion DV6 DVD disc not recognized and the media player does not work

  My HP DV6 is having... issues.  Windows 7.  A little history:

  Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop.  HP support could not help or Fix - It programs work.  Had to restore it to factory default and that solved THIS problem.

  Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized.  Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.

  Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.

  More?  (Windows Explorer, not Internet) will be often expire or crash...

  I have Norton Internet Security with live update and have yet to have virus problems.

  Any help or questions greatly appreciated!

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps:

  1. Click Start, type regedit in the Search box, and then click regedit in the programs list.
     
     If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

• CD/DVD-ROM not recognized since the installation of Vista, without errors

  Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

  Hello!

  I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

  When I list the disk in the Terminal, the drive is listed.

  But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

  I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

  Is this possible?

  If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

• HP Envy 5530 PSC: HP ENVY 5530 PSC will not scan and save on my desktop directly from the PSC. Help!

  Help, please! My printer/scanner/copier device will scan is no longer documents if you ask the PSC analysis directly. It will scan and I would like to save the scan on my computer if I open the icon Wizard HP printer on my desktop computer and it asks from there. Nothing has changed on this computer or PSC recently and the PSC makes still copies very well.

  When I request the analysis of the PSC, here is the error message that appears: "connection error. The computer does not respond. Check if the USB cable is attached or wireless is working properly, and then try again. »

  Some info:

  The PSC shows that it is connected to the computer and I checked the connections and everything is physically connected. I also update the PSC. The PSC is certainly connected to the internet (and without wire - the light blue, no flashing lights). I have Webroot Anywhere Secure protection for my desktop computer.

  I checked the forums here and I do not see a response. Some of the help documents are dead end links so that does not help.

  I'm not sure if this is a permanent solution, but finally, I finally solved this problem.  I decided to first unplug and then plug in my router. Then I unregistered and registered with Windows 10, your previous recommendation. Then I started from scratch - unplugged everything related to the CFP and also deleted the previous PSC software installed on the computer. Then I plugged in the printer and re-downloaded software. Tested to request a scan of the PSC and it worked - double checked by stop and to remit all running and I tried to request a scan of the PSC again and it worked again. So, it seemed to be a combination of renewal with Windows 10 and setting up of the PSC from scratch, to solve this, at least for me. Thanks for your patience! I don't think something regarding my download Windows 10 had something to do with mess up the signal from the PSC to the computer and I had to put fresh once again.

• CD ROM / DVD drive not recognized and viruses on the computer

  Can anyone help please?
  My CD ROM / DVD Drive failed. I tried troubleshooting etc but not available. The computer does not recognize I have a CD / dvd as a player he says that is not recognized by the register?
  I also have a virus that I can't get rid of, it's maybe part of the problem (Trojan horse - Spy.HTML.Smitfraud.c) I ran many viruses, spyware and trojan controls but there is no cure yet?
  I tried the system recovery, but it won't let me get it back to an earlier date.
  I can't use my restore disk because the computer does not recognize the drive. A catch 22 situation.
  Can anyone offer any other advice that throw it out the window?

  Help from anyone would be much appreciated.
  Concerning
  PG
  "" "" Laptop user frustrated. ""

  [Edited by: admin on 3 July 05 22:11]

  HI Paul,.

  I think that your first priority will be to remove the virus from your laptop. The following link contains the virus details: -.

  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Desktophijack.html

  You are shown in the BIOS to CD-ROM? If yes then set to be the first selectable boot device and you should be able to load your recovery disk and restart it.

  HTH

• Pavilion s5-1020: CD not recognized after Windows Installer 10

  I downloaded W10 and now my CD is not recognized.

  I did without success but then conducted a scan for malware with a program that I got with the support of HP.  After that this analysis completed and removed 38 items malware I rebooted and the CD is now recognized.  I don't know what effort did the trick, maybe both.  Thank you if it is your solution.

  Tim

• 2GB of detonators like not recognized (and "FAT is corrupted" etc.)

  Right... Well. I recently accidentally can I have badly formatted my Fuze GB 2 as FAT instead of FAT32 (or whatever it's supposed to be).

  The message on the screen (whenever I turn on the rocket or connect) is

  "FAT is corrupted. Please connect the device to PC and recover FAT. »

  Well, I don't know how I'm supposed to do. It is not recognized by Windows (she appears as "Unrecognized USB Device" and won't let me access it or format or something, does not even get a drive letter assigned and there is no option in the Manager). In Ubuntu, it is recognized as a mass storage device and I see it always all the files that were on it before it stopped working, but I can not format or do something with it (even if I could copy the files).

  Anyone have any ideas on how to solve this problem? =(

  (I don't mind losing what is there, I have it on my HARD drive in any case)

  Thank you<>

  EDIT: Also, I was in PARIS when I tried to format it first time round (before it is broken), but I can't in the drive for change to MSC because the formatting is inconsistent and it is unable to load the user interface...

  Right, well, I used it too muchl to format as FAT and I can access now.

  Everything seems to work fine, so I'm happy.

  Completely forgot that all of the built-in Windows utilities suck.

• OK, I have a legal copy of vista Home premium with service packs and updates from microsoft and want to start clean with a clean installation I do not have the original, only recovery and put installation disc at level Express disc?

  OK, I know that this may be simple for most, but I have an of a moment _ this find.  As I said legal copy that has been saved... I backed up all my files on DVD, I don't care if I lose all the programs that I can always download them later.  Basically I want is that it was when I brought home the first time.  I searched high and low for the original disc of Vista but no luck.  I do not have people upgrade at any time, but I was not able to find a definitive answer about it online.  Not too complicate it again but I have 4 GB of ram and processor can run 64-bit, and I have 32-bit curently I'm sure you know where I'm going with that.  I know a little about how to do it, but want reasurance and direction from someone who knows hit safe and ready to help.  Any person who get end to this nightmare for me will be really appreciated.

  Shaun

  Contact the manufacturer to obtain a set of recovery discs original (for a fee) and use them to make the initial installation.  Activate it.  Then you can do the upgrade and activate that.  You must install the original operating system in order to install the upgrade.  If you are going from 32 bits to 64 bits that cannot be done with an upgrade - which requires complete and clean installation.

  Here is the Microsoft policy on replacement software; http://support.microsoft.com/kb/326246.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.