HP psc1315 all in one: the NEW CARTRIDGE PRINTER ALIGNMENT

Similar Questions

• F4480 printer does not yellow, even with the new cartridge print

  I ran a diagnostic test and he said pan into the left chute has 1 or more lines short-circuited control.  Anyone know what to do?  It prints magenta and blue, but not yellow.  I tried 2 different cartridges and they are both the same.  (It is new).

  It looks like a mistake material Dorothy, the printer may be on its last leg. Try following the steps as much as possible of this document (do not buy more new ink) http://support.hp.com/us-en/document/c01670710

  If this does not work, I would contact HP support to see what options they can offer you: 1-800-474-6836 or http://welcome.hp.com/country/w1/en/support.html

• HP 5530 Envy: How to clean a leak before installing the new cartridge

  I haven't used my cartridge color for a long time, and now I see that the contacts are a little disordered (a few leaks). How can I clean before installing the new cartridge? Q-Tip and alcohol?

  Hi @PMarlene

  Just a non fluffy and distilled (or bottled) water works better...

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/document/c03743431/

  

• DeskJet 2132: Do not print with the new cartridge

  I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

  I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

  I tried to put back the cartridge several times and made sure the protective film is removed completelu.

  I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

  HI @saking88,

  Welcome to the Forums of HP Support!

  I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

  HP DeskJet printers 2130 - color or black ink print do not.

  This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.

• With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears.  I have an Acer Aspire V3 windows 8.1 - 64 bit

  I am trying to solve this problem since last week.  No change at all.  (I uninstalled all the components of the front range of HP printers)  The printer I have is HP C6250 all-in-one.

  I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job.  With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  I thank very you much.

  Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554

  And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software

• Bad print quality with the new cartridge

  I replaced the cartridge on my HP Photosmart c4680 printer a few weeks ago and the print quality looks as if it is low on ink. I followed the instructions on alignment after installation and made sure that I installed the new cartridge. There is no prompt that the ink is low. The other weird thing is sometimes the printer does not start when I turn it on. The screen reads HP and he begins to beep every 10-15 seconds or more. This problem occurs intermittently, but began after the installation of the new cartridge. Would appreciate any help to solve these problems.

  (1) pull the cartridge out and reinsert it, if there is a latch to ensure she fully locking up.

  (2) your HP software for the printer should include several utilities, one such utility is to print a page of 'Test '. Run that usually it will clean the print head.

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/printers-and-all-in-ones/print-a-diagnostic-page/1245169387001/printing-a-test-page---HP-Photosmart-c4795-all-in-one-printer/video/

  Now try printing one of your documents.

  J W Stuart: http://www.pagestart.com

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• I've set up a new account of emal that the original has been hacked. I want to inform all my contacts the new email. Hotmail only allows me to send 9 emails per day until I verify my account.

  I've set up a new account of emal that the original has been hacked.  I want to inform all my contacts the new email.  Hotmail only allows me to send 9 emails per day until I verify my account.  Box for this constantly, says 'problems', try again in a few minutes.  This lasted for more than 12 hours!

  How to check my e-mail account so that you can send to all my contacts at once and send emails to more than 9 per day.

  Thank you.

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When the new cartridges I get testpage first when I give a print command

  When the new cartridges I get testpage first when I give a print command

  Hello

  This sounds as if it were a feature of the printer driver.

  The best thing to do in this case is to contact the manufacturer of the printer.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• the HP Color Laserjet 3800: HP 3800 will not recognize the new cartridge cyan

  I tried to put back several times, turn off print and on. No luck. I just ordered these toner cartridges and they arrived today. I'm a graphics on a tight schedule. Help!

  Well, the new cartridge arrived and I got the same message. I called the IT company I have dealt with 15 and told him about the problem. They sent a technician who inspected the receptacle for the cyan cartridge and with a flashlight and his right hand, explores every inch of the cavity. He drew his hand with a piece of black plastic no more than a quarter of an inch long. It's on the right side of the floor of the cavity, completely backward. When he reinserted the cyan cartridge and turned on the printer, MESSAGES of ERROR NO MORE! I am so relieved and so embarrassed at the same time where I couldn't find this little piece of plastic myself.

  Thanks again for trying to diagnose the problem.  You have been great!

• Uneven printing with the new cartridge

  I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

  The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

  This suggests a problem with the new cartridge?  Or is there anything else I can try?

  Thank you.

  See attachment.  Not for the faint at heart.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• Pics of member comments on all hosts on the new esx Server

  Peaks mem comments on all hosts on the new esx server, but the operating system does not use the amount of memory.

  The results are same vm running on the esx servers

  HP DL380 G6

  Dual Core CPU 8

  Xenon E5520 2.27 GHz Intel

  VCA mode Intel Xenon 45 nm Core2

  Guest mem 95% +.

  HP DL380 G5

  Dual Core CPU 8

  Intel Xenon X 5450 3.00 GHz

  VCA mode Intel Xenon 45 nm Core2

  Guest mem typically 25-35%

  The 3 peaks located on the new server.

  The new G6 in the memory market settles after a while if I put manually:

  Use Intel VT-x/AMD-v for virtualization and EPT Intel/AMD virtualization MMU nec training

  If I move G5 servers all right, move them back it culminates on mem. waited for itself if it settles, but no go.

  PS we put in CVS mode on the cluster.

  New servers booted on peak still G6 mem comments.

  Any thoughts?

  You have to refer to this before KB ?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• A PDF file does not print on the new HP printer

  I recently added a printer HP CM1415fnw in my office and I can't print any PDF documents. Word and Excel print very well. Why?

  Well, the point is moot, because the true culprint was my lame OS

  (Vista), so my laptop is in the shop getting Windows 7... Thank you for all

  your advice!

  Bill@VT http://forums.adobe.com/people/Bill%40VT has created the discussion

  "Re: PDF files does not print on the new HP printer.

  To view the discussion, visit:

  http://forums.Adobe.com/message/4558299#4558299

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me