HP PSC1410 'off' when it is 'on '.

Similar Questions

• IPhone 5 s screen does not turn off when it is plugged in to the charger.

  Hi all

  I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

  Please let me know how to solve the problem.

  Kind regards

  Manju!

  Hello there, Manjunath K P!

  Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

  If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

  Once that is done, go ahead and try to set the automatic lock again and see if it works.

  See you soon!

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Nb505 shuts off when I remove the charger

  for some reason any my Toshiba netbook mb505 turns off when I remove the AC adapter / charger netbook. I can go on the netbook when its plugged in. I also see that the charger is plugged and not to charge and is 99%. If anyone can help it would be appreciated.

  Are you using the original Toshiba AC adapter?

  Looks like the battery or motherboard has a problem and may need repair to a Toshiba repair center.

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• sony KDL tv switch off when no signal HDMI

  I have my KDL-60NX720 connected to a PC via HDMI. After about 20 minutes, the PC will enter standby mode, but the TV stays on. Is there a way to make the TV turns off after there is no signal on HDMI port?

  Concerning

  Davor

  There is a setting on the TV called auto stop where in the unit turn off when no input no signal is detected for 15 minutes. To access the Auto off setting please follow the steps below.

• My MOTOSPEAK off when bluetooth is turned off.

  I was wondering if anyone else has the same problem? My motospeak remains on even after my bluetooth goes out... so I force close and then when I turn on my bluetooth it turns on... but still does not turn off when I turn off my bluetooth. A way to fix it?

  Well, in the framework of trying to solve another problem... see my other post... I recharged my phone to default settings and reloaded all my apps. It said that the problem with Motospeak has set itself. We will see as time passes if that is still true. Thanks for all the suggestions and help.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• Satellite A110 ranging power off when it is hot

  My Satellite A110 is always turned off when it's hot.

  What is the problem? Mayby fan? Can I change this?

  Hello!

  You hear a fan noise?

  Maybe you should clean the laptop. For this, you can use compressed air jet and could blow the dust from the fan. You n t have to disassemble anything.

  And try to find out if the fan works.

  Good bye

• How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it. In the Labview web UI designer

  How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it.

  I need to change the adjustment vaguely Autoscale property for my graphic indicator. Can someone help me please.

  Thank you!

  Hello

  I have confirmed that there is currently no way programmatically enable/disable autoscaling for axes on the LabVIEW graphical indicator generator of the user Web interface. We noted this to possibly be implemented in the future; Sorry for the inconvenience.

• iPAQ turns off when taken off the coast of the Office docking station

  My hp iPAQ PDA (model 4155) began to turn off when I take it off the cradle of office.  I don't see any options or settings to correct this.  Please notify.

  Sounds to me like the battery takes is no longer a burden.  You can probably find a new battery for your iPaq by searching on the internet.

• My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  Original title: security settings

  My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  How can I solve this problem

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the full error you get, when you try to activate windows Defender?
  4. what anti-virus is installed on the computer?
  
  Method 1: Check if the Windows Defender service is enabled.
  a: Type Services.msc in the start search box and click on enter.
  b : now, look for a service called Windows Defender, double-click to open it.
  c: Now Start the service and make sure that it is set to automatic.
  
  Method 2: Temporarily disable the antivirus and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
  Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.
  
  Hope this information helps.

• My computer it does not turn off when I go early and turn it off?

  My computer it does not turn off when I go early and turn it off? u can help me, please!

  Hello

  ·         What operating system do you use?

  ·         Did you do last changes made on your computer before the show?

  If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  If you use Windows XP, see:

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  See also:

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions