HP while one2575 does not print

Similar Questions

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Inkjet e: 5740 5740 printer does not print color cyan & alignment problem

  Hello

  Recently, I replaced my lights on my P 5740 printer ink cartridge while trying once photograpgh print [6 x 4] & have had nothing more than headaches since.

  The cyan color does not print ink levels indicate that it is used. I cleaned the heads of ink at level 3. I have replaced the ink cartridge & still have the same problem and now the alignment is unsuccessful.

  I'm challenged to begin with technology & this challenge is both frustrating and disappointing that I do not understand what I did right.

  Any suggestions before I have packing the printer & return to Staples?

  Thank you

  HI @RC23,

  Because the printer is only a couple of months I suggest to HP customer care and ask about a replacement printer. Most likely, it is a matter of ink system, since you've already tried another cartridge with the same results. Check the model number and the form to receive a file number for faster assistance.

  Thank you!

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• Photosmart eStation C510 does not print

  Hi my (?) Photosmart eStation C510 printer does not print! I checked all settings changed ink cartridges, it will print a color image, but it will not print black and text is missing from the photo - I cleaned the printheads three times. I found the 'helpline' inaccessible HP and am pretty much scream of rage and frustration. I don't understand why it will not be printed. Printing ink level indicator is not telling the truth because I replacead all the cartridges this morning and he said one of them is half empty! If I see another white page out of this printer I'll cry! I guess it's maybe that black ink nozzle is completely blocked - it's the only thing I can think. Other peoples encountered this problem? and Yes, I restarted, six times

  You both seem to have some problems with printing caused by your print quality.

  Suzyd (and I would like you to try this too, CPilenza), I recommend do you a similar process that is Cipelenza. I would like to open your machine and remove the cartridges and print heads. Then unplug your machine while it is still open. Then use a fluffy cloth (like a coffee filter) and little water to clean the contacts on the back of the printhead (the bumps in copper). Then clean the contacts inside the machine. So shut up and plug it / turn it on. Replace the printhead and cartridges in order ask the machine.

  Sometimes, if the print head is damaged, the part will be replaced.

  The two of you run this software to diagnose your hardware: http://support.hp.com/us-en/document/c02762272

  Let me know the results.

• CP 1518ni does not print

  CP 1518ni to a friend and he just got a used does not print.

  It's about everything else such as:

  Web accessible via rj45 interface.

  seems to boot ok.

  When I launched a print or make a report from the Control Panel, the display shows the impression and the green light blinks but nothing happens-no print, no noise from engine - nothing.

  I can 'x' out the print job on the printer.

  saitsifed computer that has printed the print job.

  has worked for a year and then put in stock.

  black ink is about 19% while others are in the 1940s.

  has shaken the toner cartridges.

  Conversely the paper.

  Since it is not print from the Control Panel doesn't much try since not a driver problem.

  connected directly to a wall outlet.

  the display seems to work fine.

  I'll make a wild speculation and guesses that a connector somewhere it should be ripped out and reconnected.

  What gives me this idea, is that there is no engine noise he's trying to pull the paper.

  Electronics seems ok.

  I need a copy of a repair manual to figure out how to get inside for the cards and connectors and try my theory.

  the plastic parts on more recent printers seem all to snap and difficult to understand to tell - assemble.

  other thoughts before you get out the screwdriver and start spinning.

  It should be good to use from month to month. I would recommend that during long periods of inactivity that you remove and shake the cartridge (as I described above) before using the machine. Maybe just create a copy or a test print once a month to make sure that everything works as expected.

  I'm glad to hear that the problem has been resolved, and you could get this printer up and running! If you wish, you can mark my post as the solution to the issue that that other customers will know the best method to resolve this question should they encounter it themselves.

  It is for me to be here for you when you need me, if you ever fear to come on these forums and ask for help from me or my colleagues. We will do what we can to solve your problem.

  I hope that you have a wonderful week and I hope that the time where you are is as beautiful as it is here!

• Body of the email does not print in Outlook Express

  Body of the email does not print
   
  I had this same question posted under Outlook but was advised to post it under Windows...
  I use windows xp professional outlook express and the body of the email will not be printed.  The printer works well with other programs and the title of the print emails.  I does not matter if I try to print starting from the preview pane, or open the email and try to print from there.  All the settings are the same as they were while he was working.  We use a printer HP Officejet Pro 8500 has.  I have forwarded this email to my son who also uses xp and outlook and print with all the problems.  I made a diagnosis on the printer and it says it's in good working condition.  From now the only way to print an email is to copy in word and print it from there.  Any thoughts?

  Hi mriddle27,

  You can check if the following is useful.

  Method 1: Clear the Auto-select option for encoding.

  a. open the message.

  b. click view in the menu bar.

  c. point to encoding , and then clear the auto-select Option.

  Method 2: You can try to repair Outlook express and see if it helps.

  An Outlook Express basic repair kit

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• My HP 5650 printer does not print

  My HP Deskjet 5650 does not print documents today. He says it's printing ' the power light is on, and printer produced noises every once in a while, so I think that the cable is OK.

  I use Windows Vista. Toshiba Satellite A135-S4407, OS 4.0 GB 32-bit, Intel Core Duo T2450 CPU.  I checked the manual and do not have the problems they mention.

  I just changed the ink. And the paper blocked steeple, but I think I had a good impression after that.  No sign of a paper jam in the back.

  It turns out that my coverage was a little crooked.  I have it jiggle around a lot so he can lay flat enough. He didn't look wrong by very much, but it was enough to keep printing.  I may have to buy a new printer because of this problem; It is difficult to lay flat enough these days.

• My HP psc 1110 does not print colors when I use the shortcut keyboard F12 key to print. considering that it is p

  I just bought printer HP psc 1110 and despite I loaded the print from the HP website driver and together it up correctly, it has new ink cartridges, it does not print color to color text pages when I use the the keyboard F12 shortcut key to show.  I have the microsoft intelli wireless keyboard.  Although that it prints very well in color while I use the method of dialogue of the system either by pressing "Ctrl + Shift + P" keys together.   I have another canon printer canon pixma 1500 a former model, even this canon allows to print in color using one of the methods above to print.  I'm curious to know why HP is behaving as it is with me.  Can someone knowledgeable enough to enlighten us on this issue and help me on this problem, please.  I would be grateful if someone can send me a response.

  My email is: {deleted personal information}

  Naseer Malik

  Hi Ngoyi-Malik,

  OK, when you right click and select print work properly?

  If you come to open a different document in your Word and press Crtl P it prints correctly?

  The question seems that it is related to the program that you use for your missions. You may need to continue to press the Maj LTRC P in order to get the color to print from this application program. Let me know if the Word printing works well?

• Printer does not print with new cartridges

  After I changed the cartfidges the printer does not print anything. No black and no color. Out of curiosity, I noticed that the old cartridges were still half full because I compared the weight. So I put the inside once again but not print. Only a few pale almost unreadable characters. This happens usually when the printer is dirty then I ask for a cleaning. But I'm still without printer.

  My printer is a HP 980CXi and I have now, I was very satisfied. I've heard that some printers are programmed to be used a period determined, while they are blocked. If this is the case. Please be so kind to tell me does not search for a solution. Too bad I bought a pair of cartredges for nothing.

  Hello Yaio,

  Welcome to the HP Forums.

  I see that you experience a problem when you attempt to print in black ink and color.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I also suggest that you take a free cloth and some bottled water and clean the contacts on the ink cartridges as well as contacts in the printer and then dry them off, reinstall the ink and try a test print.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• does not print

  I have a hp deskjet 3050 a j611 series printer is installed on a Windows 7 via LAN (router) wireless system. I can't print. Used 'Print and Scan' Dr. who said that everything is ok. It is the default printer and is very well until I begin to print. He says while the printer is off line. error message indicates the printer is off, but of course, this isn't. Once the queue is deleted the word 'offline' is removed from the printer window.

  Any ideas?

  Welcome to the Forums of HP Carol_p,

  I see by your post that you cannot print over wireless network.
  I can help you with this issue today.

  I have provided a document through the steps to see if it will solve this problem.

  You can ignore the Solution, since you already ran the Print and Scan doctor.

  "Printer is off-line" Message appears on the computer and the printer does not print.

  If you're still having problems, then check this document for does not maintain connection printer wireless.

  Did print the test page but when you started printing and scanning doctor?

  What was the defined port on?

  If there is anything else I can help you with just let me know.

  Good day.
  Thank you.