HPE 180 t CTO: optical port HPE 180 t cable?

Similar Questions

• I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  I just bought a keybboard ultra thin logitech for iPad air. It has a port for a small cable, but no cable in the box. What is the port for, and what don't get me?

  Have you tried the Logitech support site?

• HP Pavilion ELITE HPE-510 t CTO: OPTICAL DRIVE SUDDENLY NOT AVAILABLE

  HI -.

  Hope Paul reads this message and has time to answer...

  Well, from 1 day to the other Tower HP NICE (under Window 7 PRO - factory installed) has decided for this don't want to deal in ANY WAY with the factory installed PLAYER PERSPECTIVE.

  Specifications of the computer:

  > S/N: [personal information]

  > P/N: XX093AV

  Care optical drive:

  > Model name: DVD burner

  > # Model: TS-H653

  > S/N: [personal information]

  Solution attempt:

  -Removed from this computer, it connected to another computer = WORKED.

  -Went to the HP support site, software used it to determine the model accurate on this computer, clicked on the link to the software from the HP site, looked for updates or drivers for the OPTICAL DRIVE in this computer = NOTHING.

  Hmmmm.

  What to do... What to do...?

  Device (optical drive) seems to work, just NOT in CE COMPUITER... :-(

  Maybe you'll be able to tell me what to do to fix this unusual, huh, Paul.

  Thanks - in advance.

  Patrick

  Paul-

  Sorry for the delay to get'n to you on the issue of the optical drive.

  It turns out that NOTHING of the tent to correct this has worked. The disc is GOOD. It connected to another computer = worked. Return to the original HP = he doesn't see.

  DIFFICULTY = customer provided with a DVD player /-RW USB EXTERNAL. Worked perfectly.

  Happy customer. Happy Patrick. Paul - hope he's happy, too.

  CIOU

  Patrick

• Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

  The cable does not fit on my phone because it is stuck on the port of lightning

  6 iPhne

  Download the right cable before you damage your product and void the warranty.

  http://www.Apple.com/shop/iPhone/iPhone-accessories/power-cables

• Satellite Pro R850-1 - Port LAN: active / deleted cable

  Hello.

  I reinstalled Windows 7 Pro x 64 of the Toshiba recovery partition. It has installed all the drivers and software. The laptop works very well.
  But, after the OS re-installationI it is impossible to connect to the local switch using the LAN (Ethernet) port. Adapter network (translation from German) reports: "identification of network / activated / network cable removed. See the video:
  https://youtu.be/C6W_OBzRo8A

  First time after about 10-15 minutes, I had a stable, added the laptop to our Active Directory connection. But after that restart the laptop cannot connect to ethernet.

  I installed the driver LAN of the 15.7 and updated the BIOS to 4.10
  The situation has not changed.

  I also tried to use an IP address to fix instead of DHCP - always problems.
  Tried different LAN port on the wall - always problems.

  Another laptop work well on the same ports.

  The LAN port has worked before you restore the OS of the recovery.

  I don't think that the LAN port has real hardware problems.
  Maybe I just need to change a few settings of network card in device like the speed Manager and so on.
  The problem is - I go to this place once a week and it would be nice to have a few other ideas which might help.

  Hello

  After the recovery specifications own image installation has "standard" setting so LAN should work without any problems, except that you have changed some settings.
  Over the last 10 years, I got a lot of machines many times and I have never seen anything like it. After LAN laptop wired needs about 30 seconds and connection must be very stable. The two LEDs near the LAN connector must be ACTIVATED (green LED flashes, of course).

  I don't really know what to suggest. Maybe you need to reinstall new OS.

• Equium M50 will not recognize the LAN port - error: disconnected network cable

  I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.

  I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G to win the wireless port, and since that time my machine won't recognise the LAN port. .

  I know that cables are OK I used with other phones and had no problems. I can also plug a PCI card to connect without any problems. It seems to me that if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.

  Anyone out there with a similar experience and some tips/suggestions?

  PLEASE

  Hello

  For me this doesn't show t as a problem of LAN card but your router is a problem.
  Check Device Manager if the network card is correctly recognized. If there is no yellow exclamation point, so all is ok!
  You can try to remove the network adapter from Device Manager and reboot after new install driver LAN again.

  The question has looked after installing or connecting the new Netgear modem router.
  I would recommend to check first the settings or update the firmware on this router.

  I found more useful websites
  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  http://www.experts-exchange.com/Networking/broadband/DSL_Cable/Q_20381405.html

• Switch ports connected with cross cable on the same switch...

  Hi experts,

  Just got a doubt.

  If both a stand-alone switch ports are connected by a crossover cable, how will be the stp of attitude toward this scenario...

  Thank you

  Arun

  Hi arun,

  As we all know the switches use according to criteria of application PLEASE:

  (1) to root the lowest BID

  (2) a low-cost path to the bridge root

  (3) OFFERED the lowest sender

  (4) minimum port priority

  (5) the lowest port id.

  So in your senario until number 4 allvalues will be equal and there will be a match tie. So for port breakage id will be used and the port with the higher port number will be blocked and low port id will be in a State of fwding.

  Example:

  If you've been through e1/1 and e1/2 cable on the same switch then 1/1 b in condition of fwding all-in-1/2 will b in the blocking state.

  HTH,

  Kind regards

  Shri :)

• 55VL900A and BDX4300KY - TV is not output Dolby Digital fiber optic

  Just installed my new TV, 55VL900A - great picture, very happy. I have a BDX4300KY a drive blueray and Foxtel connected to the TV via HDMI.

  The TV has audio output optical fiber, which I run for my Yamaha DSP - A1 amp.

  The Blueray and Foxtel are defined to pass on Dolby Digital through HDMI.

  Problem 1: TV does not have Dolby Digital of the fiber optic connection.

  Problem 2: If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.

  I searched and found no results in my manual, or in the forum. Help, please.

  Thank you, Mike.

  Hello

  I put t have the same devices at home, but I use the optical cable for sound. It is connected to my blue ray and Technichs amp player. I use 5.1 home theater connected to the Technics. The sound is perfect.

  I put t know how it works on TV Toshiba but check please if something should be enabled there.
  > The TV does not have Dolby Digital of the fiber optic connection.
  See s operating manuals and do not forget the optical output must not be activated. Optical cable is connected to the amp in the optical port marked as TV in the back? Don't forget that bulks is set to TV chanel when you want to hear the sound of the TV directly. In my opinion, it should be best option for you if you will be able to make it work.
  > If I run audio blueray or foxtel fiber optics directly to my amp, there is a sync problem. The audio is delivered earlier than the image.
  Which is really strange. Can you please test it with cable audio normal cinch? It will be interesting to know if the same problem occurs again.

• hidden data port 2 on Mac Pro 1.1

  No one knows what that Apple engineers have reason had to have these two ports on the motherboard? Discussions I read suggested that they were for the installation of additional optical drives, but I just watched a youtube video that has already shown the optical drive port has additional sata cables already in there.

  2 are there thing, data ports, but I don't see a pair of extra power cables. It has been designed a bit more from the Commission? Or was there a plan that Apple abandoned.

  Wiring in optical bays in Mac Pro 1.1 to 3.1 2008 model have ATA/IDE wiring in optical bays, connectors from molex power 4pin.

  In my view, Apple has included these two additional SATA ports to guard against optical disk ATA/IDE, becoming too expensive or outdated form. Additional ports gave them the data connection to allow them to switch to SATA optical drives (with duplicator of molex power 4pin or adapter) without revision of the motherboard.

  There is no explanation of how to use them in any official literature from Apple. They are too close, and using both requires using at least a right angle connector. Practical power is expected, because they were never for your convenience. Research of power for additional disks attached here is your problem. (learn about amateur sites)

  For the great re-design for the 2009 model, these ports were eliminated, and the optical bays got SATA wiring (including power SATA).

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• Do output sony 5.1 HDMI, audio devices connected TVS optics carry

  Hello

  Try to connect it to an existing SONOS system.

  All HDMI devices must connect to the TV.

  Worried that Audio optics translates PCM instead of keep 5.1 if it is how the content is

  Thank you

  Chuck

  Yes, the optical port of the TV would be able to sound output from devices connected using HDMI connection. Make sure that the settings on the source device is set to 5.1 surround sound output.

  If my post answered your question, please mark it as "accept as a Solution.

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.

• SNMP for stack Ports on Dell 6248? (xg1... 4)

  I have 5 x 6248 stack in a ring... I can see the counters of Point of battery through the web INTERFACE.  I use munin to graphics system attributes, and it finds all the regular ethernet ports on each device, but not ports of the battery.

  A snmpwalk example will show, for example:

  IF - MIB:ifDescr.47 = STRING: unit: 1 location: Port 0: 47 Gigabit - level
  IF - MIB:ifDescr.48 = STRING: unit: 1 location: Port 0: 48 Gigabit - level
  IF - MIB:ifDescr.49 = STRING: unit: 1 location: Port 0: 49 10 G - level
  IF - MIB:ifDescr.50 = STRING: unit: 1 location: Port 0: 50 10 G - level
  IF - MIB:ifDescr.51 = STRING: unit: 1 location: Port 0: 51 10 G - level
  IF - MIB:ifDescr.52 = STRING: unit: 1 location: Port 0: 52 10 G - level
  IF - MIB:ifDescr.53 = STRING: unit: 2 Slot: Port 0: 1 Gigabit - level
  IF - MIB:ifDescr.54 = STRING: unit: 2 Slot: Port 0: 2 Gigabit - level

  These 10G are the optical ports at the front of the switch, but I can't find anything for my friends in the back of the switch.  I'd like to think the ifDescr soar "Slot: 1"... tips on how to find the correct OID?

  Thank you

  -danny

  You can try the following traps:

  agentInventoryStackPortTotalErrors.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.10

  agentInventoryStackPortErrorRate.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.9

  agentInventoryStackPortDataRate.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.13.7.2.1.8

  The categories look the same as the list of counters.

• The charger cable will not remain in the port of lightning

  I have an iPhone 6 more here about a year, and the last few weeks, I noticed that all my charger cables to remain mounted in the port of lightning.  In order to get the phone to load I really need to put a little pressure on the cable into the phone.  It seems to be the port, not on the cable (I tried 3 different ones).

  Have you checked there is no fluff in the window of light? I had a similar problem where the phone wasn't loading and he had some fluff Pocket compact at the back of the port so that the cable was going on deep in the phone.

  Used a starbucks wooden stirrer split into two (as the metal could damage it) to delicately clean or comrpessed air. Supprised how much came out.

• Cable modem has no WAN port

  I have XFinity for my cable and internet services.  We just moved into a house built in 1850 and due to the size of the House and horse hair plaster, upstairs gets very little signal WiFi.  I want to extend the reach of WiFi and intended to do with a couple of Airport extreme.  The only problem is, every tutorial I watch shows the first Airport Extreme being plugged into the WAN port on the modem cable suppliers.  My router/modem, made by Cisco, has no port Ethernet WAN port only 4.  Can I connect the Airport Extreme on port 1 and then put in place using the Airport according to normal or need a WAN port?

  If you have a modem/router, then you would connect an Ethernet cable from one of the four ports Ethernet LAN <>-... choose any you want, they are all the same... to the "O" on the AirPort Extreme WAN port.

  Then use Configuration utility of Apple AirPort "Wizard" to configure AirPort Extreme to create a wireless network that uses the same exact wireless network and the same password that the wireless Cisco uses.

  The wizard will apply automatically other correct parameters... Mode Bridge, by example... so you don't have to worry about things like that.