HT-CT660 HDMI ARC problems

Similar Questions

• HP ENVY 15-j165 hdmi output problem

  HP ENVY 15-j165 hdmi output problem - tv in audio and video Setup BUT external display empty

  He mentions even the SONY-TV in (audio and video) output settings, but there is nothing on my tv, just a white screen

  have you tried re-installing the drivers, frustrated

  Something strange happened, IT WORKS! No idea why, has quite at least four times... anyway, thanks for the help, sorry not to be able to identify the problem for others with the same question...

• Send audio via a cable HDMI ARC

  Can you send audio jack arc yamaha rx777 receiver using a hdmi cable arc apple tv all so 4 ca audio played on the Bose QC 35 bluetooth headset.

  Linz

  N °

• HDMI display problem with NB520-11 q

  Hello!

  I bought a new nb520-11 q this week and connected it with my flat screen tv via hdmi.

  Unfortunately, the TV screen was cut in about two-thirds of the screen of the display of netbook once and a half and the whole screen was a kind of redish, but not the colors as on the toshiba.

  I also connect my tablet with my apartment without any problem of the tv display. So I was wondering if I need to change some settings to display on my toshiba in order to operate or if theres a bug fix to download.

  Kind regards
  Christopher

  Is the result even when you use option (LCD + HDMI) cone and office extended too?

  Did you watch any movie or video clip when that happen or you simply switched to the HDMI option only?
  To be honest, it's a little strange.

• Portege R700 - HDMI sound problem

  Hello

  I am running Windows7 64 bit on a R700. When I connect to laptop to my flat screen tv by using the built in HDMI slot, I don't get all the sounds transmitted through my TV.
  There is nothing wrong with my cable TV or HDMI that I use the same on my PS3 and everything works well.

  Is there a setting that needs to change, or something? Is this a driver problem?

  Any help would be appreciated gratefully.

  Best regards
  JNandhi

  Hello

  Have you tried to change the playback device in sound properties (read)?
  Usually it should automatically work, but please try to change it manually.

• HP Pavilion Elite e9220y: HDMI connection problem

  I can't get my computer to connect to my monitor (HP w2338h) in hdmi mode.   The graphics card is the original of the computer (Radeon HD 4350) that I'm looking for upgrade to a Radeon HD 6670, but I had no input (black screen) when I went from cards.  I have given the old card and OSD have the HDMI input, but it will connect only in VGA mode.   My drivers are up to date.  I replaced the HDMI cables and neither one works.  I have reset the monitor to factory settings in the OSD.  I'm stuck with a new video card that I can't use.

  I also moved the card wifi to a new expansion slot to make room for the largest video card.  When I handed my old video card, I discovered that I lost my internet connection until I moved the wifi card to its original expansion slot.  It's a whole other issue...

  Should I just an old dog that doesn't hunt anymore?  Otherwise the thing is what I need to do business.  For the games... Well well... not so much!

  Thanks in advance.

  Dear customer,
  
  Welcome and thanks for posting your question on the Forum from HP Support.

  Please see this article by HP "setting your monitor upward."

  http://saw.CCE.HP.com/km/saw/view.do?docid=emr_na-c01643091 & HSID = 65324518 & sz = 19657

  The web link above, they showed the steps for the HDMI connection, which should help you isolate the problem.

  Hope this helps, for other queries in response to the post and feel free to join us again.
  
  * Click on the white button on the right to say thank you Thumbs Up *.
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  VSL85
  Although I am an employee of HP, I speak for myself and not for HP

• Portable HD tv hdmi audio problem

  Hi, I have a HP Pavilion dv6-3102sl laptop with Windows 7 64 bit home edition.

  If I connect my laptop to my hd tv via hdmi, I have no sound... but the sounds of the laptop speakers. IDT high-definition works.

  In this case, if I change to Ati High definition audio I can't read mp3 files, and should control the sound of the applications.

  In particular the volume control ITA high definition never moves.

  But if I connect to my playstation 3 to the same TV I can listen to.

  And if I connect to my computer hp laptop to another hd tv can I listen this too!

  Why is my ATI High Definition Audio creates this problem?

  I'm an Italian user, sorry for my bad English.

  Ok

  the solution is to install the driver for the device realtek high definition audio for ati.

• HDMI sound problem

  Separated from this thread.

  I do not understand why a BIOS update would fix it. Other people have this same problem. Nevertheless, I will not ask someone from asus to help me install a BIOS update, because I don't have the time, money or patience, and I don't even believe that he will do everything to solve the problem. The problem is not with the bios. Its a driver issue. In addition, I came here to help. Not to be told to go ask someone else for help.

  Same here, I was shifted from the pillar to post for a week!

  NOBODY SEEMS TO HAVE AN ANSWER!

  I HAVE NO SOUND, THE SOUND CARD IS ON THE MOTHERBOARD.
  DON'T TELL ME TO GOTO CONTROL PANEL OR DEVICE MANAGER THAT HE NOT THERE HAS NO SOLUTION, OR EVEN A MENTION OF HDMI!

  HDMI works fine on my computer to WIN 10 BETA!

  TULLY

  Problem has been fixed by running the supplied with the motherboard installation CD!

  Bob

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• HDMI output problem with w2207h

  Monitor: w2207h with 3.0.0 (most recent) drivers installed.

  OS: Windows 7

  Computing: Firebird 802, x 2 9800 S with a nForce 760i SLI

  Problem: After upgrading video card drivers I lost output HDMI, no longer gives a signal.

  I am currentnly using a VGA cable with DVI adaptor as a workaround.

  I tried to uninstall the drivers and going back to previous known working more, but now the problem still persists.  Each install properly said, removed the old drivers and made a full stop down. I've uninstalled and reinstalled both monitor and nForce drivers.

  I tried four sets of drivers:

  197.45 (used to work)

  260.99 (used to work and update 197.45)

  266.58 (nvidia recommended).

  267.24 (beta).

  I also left auto-install win7 it's set of drivers with no luck.

  I also tried to Exchange another HDMI cable with the same results.

  Something to note: I can plug in VGA and HDMI at the same time. The monitor uses input VGA although HDMI is the default value. Under control Panel\Appearance and Personalization\Display\Screen resolution - display I see two choices of monitor. If I force it to choose the HDMI selection it works, but as soon as I unplug the cable VGA monitor loses signal and falls asleep.

  I have accumulated my brain for 8 + hrs on it. Any help is appreciated.

  Also, what happened on the HP Voodoo specific forums They have merged?

  Great success!

  Here's how I solved it.

  1 borrowed a second monitor from a friend it connected via VGA. Also connected my monitor via HDMI.

  2 the navigation target Panel\Appearance control and the Personalization\Display\Screen resolution on the VGA monitor.  Changed display image duplicated on both monitors and it WORKED. I was finally viewing HDMI on my monitor main but forced resolution 1280.

  3. under the control panel nvidia-> put in place several tab displays, monitors showed, I deselected the VGA monitor (it's disabled/grayed out until I did a reboot) and this allowed me to take back the HDMI @ my natieve resolution 1680.

• Windows Vista: HDMI Intermittent problems

  I bought an ASUS desktop computer the month last with the intention to use it with a new flat screen TV via HDMI.

  The problem is that the HDMI output is not reliable. Sometimes I can hear startup sound by connecting to the computer, but it often cuts to the middle.

  When I check the audio output devices, I do not see the HDMI device, but it is greyed out and considered "disconnected." If I disconnect and reconnect the cable, he miraculously "reconnects", but I have to restart the application to hear once again, even when it recognized as connected. I can then get sound until the next time I log on, or restart the computer.

  • The HDMI device is set as the default device.
  • The TV is the only video or audio output connected to the computer, and no other audio ports are used at all. The computer is only on television and only via a HDMI cable.
  • The problem exists since I configured the computer the first time, and I did not install any additional software on the computer - I'm happy with the standard Windows Media Center for video and audio options, so no iTunes or another media player has been installed.
  • There is no error message for the HDMI device in Device Manager, indicating that the device is functioning - even when it is obviously not.
  • I tried to update the drivers HDMI but I apparently have the most recent drivers for the hardware.
  • I tried to uninstall the device in Device Manager and let him reload the drivers automatically.
  • The TV has two HDMI ports, and I have the same problem on the computer no matter what port I use. I have audio problems with DVR that uses either HDMI port.
  • I tried at least three different cables with the same results.
  • I know that the cable is not loose at each end.

  While I can disconnect and reconnect the cable to get her back, is not very practical, because the TV is hanging on the wall and it is difficult to reach the port at the back of the computer. I'm also afraid that my son is likely to drop the TV doing it by himself.

  It would be good to have a real DIFFICULTY which leaves just the HDMI audio output available all the time.

  Kiminy

  An update to this issue...

  I put the computer in question to Windows 7 Home Premium, and the problem seems to be resolved completely.

  Kiminy

• Vista HDMI audio problems

  I have a laptop HP pavilion dv4 1435 dx with chipset from intel.  When I plug a HDMI cable in the computer and in the order into my TV, the video is clear.  However the audio produced a crackling of high ground which is incredibly strong and sporadic.  I tried to update my Audio HDMI driver, but he says he has the most recent version.  Also, I tried to adjust the audio settings HDMI.  Is there a driver that is required for this operation which will solve the sound problem?

  Hi prototype852007

   

  HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from your sound card of the PC directly to the TV and check out them.

  Refer to the below links for more information.

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  If all the settings are correct, you can use the following steps and make sure the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

   

  I hope this helps.

• Video Windows Media Center HDMI error problem

  I noticed this problem scattered on these forums, and it took me some time to find the solution on other forums, but thought I'd post it here. For people using some graphics cards ATI HDMI with windows 7 MCE, trying to play Dolby Digital sources causes the MCE crashing. The error will say something in terms of "video error... in windows media center must be restarted." This happens about 10 seconds after the video with audio playback SD. I tried to play with all the different types of codecs ffdshow and AC3Filters etc.

  The solution is in fact a major bug in windows 7. To work around this problem MCE7 and windows sound properties cannot assign 5.1 speakers. You define the sound properties in 7 Stereo 2.0 and keep the MCE to 5.1 for dolby Digital encoded files without MCE game crashing. I hope that MS will make a fix for this because it is a serious problem, and the solution is not easy to find.

  I have a ZOTAC ZBOX ND02, dual ATI 750U Tuners and Windows 7.  Reloaded the o/s once to resolve quickly the it and returned.  Spends hours on the subject.  Switching to 2 speakers in the MCE Assistant did the trick.  Thanks for the tip.  Phew!

• New Blu - Ray HDMI sound problem

  Whenever I play a most recent blu - ray with the Mediasmart DVD application disc, I get only sound through my speakers laptop even if my TV is plugged into the HDMI port and I can say that the port is the current output device into the cursor of the mouse on the sound icon on the taskbar.  I updated the driver program and its Mediasmart as much as I could.  If I play an old blu - ray or DVD, the sound comes out of the TV very well.  In addition, any other application that uses sound works fine too.

  I tried the suggestion of HP in the FAQ where they tell me to put the "SPDIF (Digital out via HP docking station)' as the default in the sound control panel device.  But I don't get all the sounds for any application to do this.  I've noticed that the SPDIF device using IDT audio codec high definition, which is the only sound driver that I can update.  The NVIDIA HDMI output device which is under it in the control panel uses the NVIDIA High Definition audio instead, and I don't know how update if necessary.  Any suggestions?

  BTW, I use a laptop HP HDX 16 with Vista Home premium 64-bit.

  Message edited by nodakjoe on 08/24/2009 22:34
  Message edited by nodakjoe on 08/24/2009 22:35

  I had the same problem.  Here's what worked for me:

  Remove the drive blueray disc.

  Reboot the laptop.

  Turn on the TV and select it's an HDMI input.

  Connect the HDMI to the TV cable to the laptop.

  The display shall transfer to the TV (laptop becomes black)

  Open the Mediasmart drive.

  Select DVD

  Open "Settings" (the gear symbol)

  Click the tab "Audio".

  Select "HDMI passthrough" and apply.

  NOW, put the blueray disc in the drive.

  Give it some time to start on its own.

  (Note; If you try to adjust the "settings" with a disc in the drive, or without going through the HDMI cable connected, the "HDMI" passthrough not appear as an option.)

  Now that I have followed this procedure, I got no additional problem. TV audio plays, not the laptop, and I can use my home theater sound system to take the "audio" television and he takes in my cable box (and increase the volume of the TV at the bottom).

  I hope this helps. I was pulling on my hair until I discovered this. Let us know if it works for you.

  Message edited by hd1 on 2009-08-25 09:39

• HP 8440p: DisplayPort to HDMI Audio problem has never been resolved?

  I have a HP 8440p with NVS3100 graphics card. I tried all suggestions get the DisplayPort to pass audio through a DP-HDMI adaptor without success. I even tried to buy several cards in the hope of findingone that worked, even the own expensive adapter from HP.

  I cannot conclude that it is now established that the HP 8440p with the discreet NVS3100 (not the graphics card Intel integraed) simply cannot get audio of the DisplayPort adapter to a HDMI adpter? If the answer is he can't then I start shopping for a new laptop computer with native HDMI and DisplayPort not troublesome.

  Thank you

  Redlyne

  Hey Dude.
  
  If you want that works = it is confirmed in Windows 7 (x 64) and Windows (x 64) 10 = - and assuming that you have the NVS3100m GPU, all you need to do is to install the older drivers NVIDIA 188.31, file name sp47020.exe and can be found once you go to HP/Support/Drivers on your machine and after selecting either Windows 7 Professional 64 bit as your operating system. This driver also works well to win 10 x 64. It is probabbly not the fastest graphics driver or, after being released in 2010, but at least audio on DP/HDMI works :-) Have fun!
  
  If not clear, contact me.
  
  Best,
  
  Lukas