Portege R700 - HDMI sound problem

Similar Questions

• HDMI sound problem

  Separated from this thread.

  I do not understand why a BIOS update would fix it. Other people have this same problem. Nevertheless, I will not ask someone from asus to help me install a BIOS update, because I don't have the time, money or patience, and I don't even believe that he will do everything to solve the problem. The problem is not with the bios. Its a driver issue. In addition, I came here to help. Not to be told to go ask someone else for help.

  Same here, I was shifted from the pillar to post for a week!

  NOBODY SEEMS TO HAVE AN ANSWER!

  I HAVE NO SOUND, THE SOUND CARD IS ON THE MOTHERBOARD.
  DON'T TELL ME TO GOTO CONTROL PANEL OR DEVICE MANAGER THAT HE NOT THERE HAS NO SOLUTION, OR EVEN A MENTION OF HDMI!

  HDMI works fine on my computer to WIN 10 BETA!

  TULLY

  Problem has been fixed by running the supplied with the motherboard installation CD!

  Bob

• New Blu - Ray HDMI sound problem

  Whenever I play a most recent blu - ray with the Mediasmart DVD application disc, I get only sound through my speakers laptop even if my TV is plugged into the HDMI port and I can say that the port is the current output device into the cursor of the mouse on the sound icon on the taskbar.  I updated the driver program and its Mediasmart as much as I could.  If I play an old blu - ray or DVD, the sound comes out of the TV very well.  In addition, any other application that uses sound works fine too.

  I tried the suggestion of HP in the FAQ where they tell me to put the "SPDIF (Digital out via HP docking station)' as the default in the sound control panel device.  But I don't get all the sounds for any application to do this.  I've noticed that the SPDIF device using IDT audio codec high definition, which is the only sound driver that I can update.  The NVIDIA HDMI output device which is under it in the control panel uses the NVIDIA High Definition audio instead, and I don't know how update if necessary.  Any suggestions?

  BTW, I use a laptop HP HDX 16 with Vista Home premium 64-bit.

  Message edited by nodakjoe on 08/24/2009 22:34
  Message edited by nodakjoe on 08/24/2009 22:35

  I had the same problem.  Here's what worked for me:

  Remove the drive blueray disc.

  Reboot the laptop.

  Turn on the TV and select it's an HDMI input.

  Connect the HDMI to the TV cable to the laptop.

  The display shall transfer to the TV (laptop becomes black)

  Open the Mediasmart drive.

  Select DVD

  Open "Settings" (the gear symbol)

  Click the tab "Audio".

  Select "HDMI passthrough" and apply.

  NOW, put the blueray disc in the drive.

  Give it some time to start on its own.

  (Note; If you try to adjust the "settings" with a disc in the drive, or without going through the HDMI cable connected, the "HDMI" passthrough not appear as an option.)

  Now that I have followed this procedure, I got no additional problem. TV audio plays, not the laptop, and I can use my home theater sound system to take the "audio" television and he takes in my cable box (and increase the volume of the TV at the bottom).

  I hope this helps. I was pulling on my hair until I discovered this. Let us know if it works for you.

  Message edited by hd1 on 2009-08-25 09:39

• Portege R700 Bios update problem - this computer is not supported

  I tried the update for Portégé R700 Bios with Toshiba Service Station and by downloading the exe of the bios.
  Both say that "this computer is not supported", but the downloaded bios file is correct.

  What should do?

  Hello

  Go to the page European driver Toshiba and download the BIOS package manually.
  Unzip the BIOS and try to run the exe file once more

  But why you need BIOS update? Have you noticed a few problems with the laptop?
  BIOS update is not required if you don t have problems.

• Portégé R700 - 14L - no HDMI sound after reformat HARD drive

  I reformatted the HD just on my Portege R700 and sound via the HDMI TV (Toshiba TV) connection stopped working - through cable. Although the Control Panel indicates the TV speaker is the audio device by default, when you connect, no sound no fate through when I use the sound test or I play any MP4 file.

  Could someone help me on how I should fix this?

  Thx a lot

  Hello

  First, I would try to update the audio driver.
  Usually the audio page of the European driver Toshiba driver should work to find, but the most recent driver is downloadable always on the chip manufacturer page
  The sound chip is Realtek to try the driver for the HD directly from pages Realtek audio Manager.

  You must uninstall it before you install the new audio driver, one installed
  After installation, do not forget that the digital output was chosen as default device
  In Control Panel-> sound-> reading tab, you can do this

• WXP Sound Driver install problems on Portege R700

  Hello

  Have installed Windows XP on a new Portege R700 PT310E. Have managed to reinstall all drivers, but can't for the life of get me the audio drivers installed. Install the audio drivers from the website but still no audio is detected. The unknown device in Device Manager is showing that VEN 8086 DEV 3B 56 but theres not really any useful info on the PCI database.

  Any suggestions on how I can resolve. Today cost me a bit frustrating hours!

  See you soon

  Hey,.

  I agree with the user above. You must install SP3 first because it contains some important fixes for the HD audio card. So take a look at the Microsoft Web site and download the update.

  After this attempt to reinstall the audio driver.

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Problem Bluetooth on Portege R700

  Hello

  I have Toshiba Portege R700. I tried to connect it with my Microsoft Bluetooth notebook Mouse 5000 - mouse.
  Bluetooth is enabled and scanning for the mouse gives: "unable to detect the device.
  I managed to connect it to my phone Nokia E52 mobile.
  Need help.

  Thanks in advance,
  Giora

  This mouse is not known to me but check the manuals you have with her. There must be a way how to enable the detection on this mouse mode.
  After you enable this mode on the mouse scan the area with your Portege again.

• Portege R700 + dynadock U - huge problem with video delay

  Hi all!

  First of all sorry for my bad English.
  I bought a laptop Toshiba Portege R700 with Dynadock U. Everything is going well except the video. Image on the external monitor connected to the Port Replicator is very slow, even when I work on the empty desk.
  I have a lag huge picture windows animations are real slow, the mouse jumps, do not commonly.
  On the toshiba operating system is Win 7 x 64. I installed the latest drivers from the support page.
  Please answer.
  Thanks and regards.

  Hello

  What Dynadock are you using exactly? U10?
  Please check this page > http://www.displaylink.com/support/downloads.php
  You can find the latest version of the driver Dynadock.

  What version do you use?

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• Portege R700 - impossible to pass to Windows 10

  I have a Portege r700 with original Windows 7 OEM installation.

  Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

  The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

  After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

  I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

  I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

  Any idea?

  I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
  concerning
  / Anders

• Portege R700-19 t - new RAM-> start is no longer

  Hello together,

  so I bought two new RAM sticks for my old laptop
  Toshiba Portege R700-19 t

  But since I installed them, the machine does not start in an operating system more.
  The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

  The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

  The next thing was memtest86 + v4.20:
  It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
  I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

  In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.
  
  Plug portable-mem from toshiba:

  • Standard: 4 (2 + 2) GB
  • Max Speicherausstattung: 8 GB
  • Technology: DDR3 RAM (1,066 MHz)

  link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

  Cannes-old (work) ram:
  2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

  new RAM sticks:
  2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
  link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

  In my understanding of both new sticks should work well with my laptop, or am I missing something?

  concerning

  For me, the question is clear enough; the laptop does not start because of new RAM modules.

  The new RAM modules are not totally compatible, or the RAM modules are defective.

  I recommend you test an other modules; for example modules manufactured by Kingston.

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917