I can not load the KB2584146 update
My computer is windows XP service pack 3. I have automatic updates on and normally there is no problem, but I noticed that on the last update KB2584146 failed to load. I tried MrFixit but this has not cured the problem. Can you help me?
Clive Wetherley-Moody
My computer is windows XP service pack 3. I have automatic updates on and normally there is no problem, but I noticed that on the last update KB2584146 failed to load. I tried MrFixit but this has not cured the problem. Can you help me?
Clive Wetherley-Moody
I had the same problem. The fix was simple for me - thank God. I just disabled all programs antivirus (NOD32 and Threatfire) and put my firewall (PCTools Firewall) to "Enable all" - essentially disable it too. Who did. The update KB2584146 installed fine after that. I hope this helps.
Tags: Windows
Similar Questions
-
have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down
Hello
Please contact the Microsoft community. We will be happy to help you with your concern.
According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.
How do you try to install the driver? Is it through the disc or via the site?
Method 1: Use a troubleshooting tool to solve the problem:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: temporarily Disable the Antivirus and firewall and try to install
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3: Try to install in the clean boot
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.
Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.
-
How can I load the security updates that Belarc suggests?
HOW CAN I LOAD THE SECURITY UPDATES BELARC SUGGESTS?
Hello jobtoo,
You may have already solved this problem, but my suggestion would be to contact Belarc support.
You can use the link below:
e-mail: * address email is removed from the privacy *http://www.Belarc.com/contact.html
Thank you!
-
Can not install the kb2481109 update, see log attached
Can not install the kb2481109 update, see below
1.328: 11:36:42.796 24/08/2013 (local)
1.328: c:\161c59ea6306a628592717476ee96b\update\update.exe (version 6.3.13.0)
1,344: hotfix started with following command line:
1,344: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
1515: C:\WINXP\system32\mstscax.dll is present
1515: condition succeeded to the Presence.RDCInstallBlock.Section section in row 1 prerequisites
1515: FileVersion C:\WINXP\system32\mstscax.dll is less than 6.0.6001.0
1515: condition in Test.RDCInstallBlock.Section failed with the fist
1515: Check condition for line 2 of prerequisite returned FALSE
1515: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1,515: KB2481109 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
1,562: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1,562: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
38.890: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
38.890: user input: OK
38.890: Update.exe extended error code = 0xf0f4
38.890: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.Hi Keith,
I would have you look at the article-
http://support.Microsoft.com/kb/958051#top
http://support.Microsoft.com/kb/883824
http://support.Microsoft.com/kb/822798#top
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
Make sure that you back up the data on the computer before you continue.
Thank you.
-
I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"
I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to
http://support.Microsoft.com/kb/2608523
Latest version
http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx
-
Hey guys,.
I just installed Windows 7 64 bit on Windows 7 - laptop OS, but did not not any possibility of installing drivers. USB 2.0 does not respond, ethernet cable - no drivers. How can I possibly have to load drivers for the laptop computer?
I'll try to find a solution, but nothing, only the similar problem was to change in the BIOS USB 3.0 2.0, but I have no idea how do in Insydeh20 bios.
Hello
If I understand you correctly, you have installed Windows 7 on your computer, but can not load the drivers that you don't have drivers CD. In addition to this, you can not connect to the internet through an Ethernet cable. In this scenario, we can only do two things to solve the problem.
1. try to contact your computer manufacturer and ask the driver CD after mentioning your model number. You can also visit one of the shop of the manufacturer of your computer and ask the drivers CD and see if they can help.
2. you can download the .exe file from the site of the constructor on any of the advertising of work computer and then install it on your computer using CD/DVD/USB.
Hope I could answer your query. Feel free to post on the forum, if you have concerns more associated with Windows. We will be happy to help you.
Kind regards
-
"windows can not find the new updates" when you click check updates
Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.
OT:
Windows
First, update your anti-virus software and run a scan completes. Then:
If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7
If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html
-
Original title:
ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found
I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please? Thank you!
HelloYou did changes to the computer before the show?Method 1:Step 1:
You can try to start in safe mode and check if the problem persists.The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.
Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
Advanced startup options
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.
Method 2:
You can run Windows Defender Offline tool.See the following link for more information about the same:
What is Windows Defender in offline mode?
Windows Defender Offline: Frequently asked questions
Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.Method 3:
Try the SFC (System File Checker) scan on the computer.SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Let us know if it helps!
-
Can not install the new update
Hi, I use windows 8.1.
My Skype cannot be used at present. Pop message 'the old Skype 7.8 version can not be delete' while I install the new version by the message on Skype application.
I got through all the files and make sure you all relate file has been remove. But I can not install the new version. How can I update the window to desktop?
Thank you
Run the following program to remove traces of Skype from your system, which should allow you to reinstall the program:
-
I can't get the automatic updates on my samsung jack sgh-i616.
"Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.
RESULT CODE: 80072ee7
-It is a windows mobile 6.1
Thank you very much! = DAs a guide.
This error code translates ERROR_INTERNET_CANNOT_CONNECT.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Here is the error msg I get from vsphere client.
Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.
The system cannot find the specified file
VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.
I have ssh client due to vmware ESX.
ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple
564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk
Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log
Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log
Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk
Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk
It seems that all the files are there. Except that there are some spaces.
/ vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".
# Disk DescriptorFile
version = 1
Encoding = "windows-1252".
CID = 97c834c1
parentCID = ffffffff
isNativeSnapshot = 'no '.
createType = "twoGbMaxExtentSparse.
# Description of the measure
RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.
RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.
RW 16384 SPARSE "Windows w2k3 - s009.vmdk.
# The database disk
#DDB
ddb.virtualHWVersion = "7".
DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"
DDB. Geometry.Cylinders = "16383.
DDB. Geometry.Heads = "16".
DDB. Geometry.sectors = "63".
ddb.adapterType = 'ide '.
ddb.toolsVersion = "8228.
ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".
and here's a copy of the vmware.log file
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.
2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.
2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).
2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file
2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.
2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------
2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.
2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.
2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0
2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0
2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error
2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff
2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output
2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()
2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections
2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).
2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0
2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.
2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.
Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.
vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide
vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.
vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".
The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.
Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.
André
-
Can not download the KB244670 update
I can't download the KB244670 update
Hi edmain,
· What happens when you install the update?
· You receive an error?
· You install the update through automatic updates?
· What is KB2446704? What is the error it fails with?
Method 1: Reset the Windows Update components, and then install the update. Visit the below mentioned link and click on Fixit.
How to reset the Windows Update components?
Method 2: Download and install the update manually. The download link is as mentioned below. Click Download the file NDP20SP2-KB2446704-v2 - x 86 .exe .
-
Looking for new information in the discussion "can not load the video file.
I repeatedly get him "cannot complete request because Photoshop can not download the file" error message. I have read the information about Quicktime, which dates back to April. However, I get this while trying to open the video files .mpeg-2, .mxf and .mp4 (Photoshop CC). All these depend on Quicktime? Is there another reason for getting this error? At least the first two of these formats are listed in the manual as being recognized and appropriate for Photoshop CC.
Hi seiurus,.
Please check that your using the latest version of Photoshop 2015.5.0.
Also, please reset the default preferences and check if that helps.
Reference: Preferences in Photoshop
Kind regards
Mohit
-
I can not load the Home Page of Oracle E-Business Suite Applications
I have installation ebs 12.1.1 on windows server 2003 and I can't load the Home Page of the Oracle Applications (http://ebsoracle.workshop.cl:8000)
What could be the cause?
Is there a log of information on this failure?
I check the host file and that's okay
Help me please.
Thank you.I have installation ebs 12.1.1 on windows server 2003 and I can't load the Home Page of the Oracle Applications (http://ebsoracle.workshop.cl:8000)
What could be the cause?
What is the error?
Is there a log of information on this failure?
I check the host file and that's okay
Make sure that apache log files (error_log * and access_log * under the $LOG_HOME/ora/10.1.3/Apache Directory).
In addition, run AutoConfig and make sure that it ends successfully.
Thank you
Hussein -
Do not load the Windows Update PAge
I use an iMac from Apple.My system features:OS: Windows Vista Ultimate x 86RAM: 2043 MBProcessor: Intel Core 2 DuoHARD DRIVE: 250 GB + 40 GBThe Windows Partition size: 50GBMy problem is that the Windows Update Page is not loading. He showed "the page Impossible to load. How can I solve this. Don't tell me to reinstall. I tried to fix it but I can't.Failed,
I suggest that you start with these tools and test.Post back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Why is my firefox displayed this way?
http://i.gyazo.com/fd48d3c183453d76b9ec9ae2c3010730.PNGI am posting this with internet explore...I tried the reopening (right click on drop-down lists are blackened, too, but I'm fairly warned to remember where everything is,) the browser several tim
-
Shop TV - how to set up WiFi?
Can someone, please? Where the TV store set up my wireless to work? I have internet wifi and I would use on TV store.In manuals, I've read that I can stream the content from my PC, but do not know how to set up on the TV StorE.
-
HP finally released a firmware update for Seagate Barracuda 7200.11 drive (model affected ST3500620AS). If your computer has been freezing, or if your hard drive is stopped suddenly appears in the BIOS (error BIOSHD-2), this update of the firmware co
-
locking using NI USB-6251 amplifier
Hi all: I'm in the very initial stages of development of spectroscopy (FMS) frequency modulation experience on my set-up of already existing absorption spectroscopy. I know that I'll need an amplifier to lock to select the signal at a specific freque
-
Modem router connection problems
Hi all I am replacing a belkin n600 with router linksys ea6350 router. The modem I have is a Motorola Surfboard SB6141. The belkin router connects perfectly to the modem, but when I try to connect the linksys router to the modem, the light on the rou