I did no help button and cannot access trouble shoot page ro reset

Similar Questions

• try to pay some bills and cannot access the Web page. I make each month and do not know how to correct it. does not that this program can not display the page's Web site

  happening only on a few sites of bill payment.

  Hello
  
  1. what internet browser do you use?
  2. If you are using Internet Explorer which version do you have installed?
   
  If you use Internet Explorer see the methods below.
   
  Method 1.
  I recommend you follow the steps listed in the article below and check.
  You cannot connect to or connect to Web sites in Internet Explorer secure
  http://support.Microsoft.com/kb/813444
  
  Method 2.
  If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
  Security zones: adding or removing websites
  http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  I disabled the toolbar > > Menu button (via a right click on a PC, Windows 7) and cannot access the toolbar to add items to the sail back in. Any ideas?

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (Linux and OSX see: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).

  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).

  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars

• Account has been locked and cannot access messages or retrieve my addresses. Have not received my new password for Microsoft.

  Have been locked out of my account for seven days

  and cannot access messages or retrieve my addresses.  Cause a lot of stress.  No guard MS saying that they will send me a new password BUYMD.  I've set up account about 14 years and I don't remember my safe Word now.  How can I switch back to my account?  MS wrote they will send my password to the account of spare * address email is removed from the privacy *, but DO NOT.  Is the account I'm stuck on * address email is removed from the privacy * HELP!  Kirsten Ebsen

  Hello

  To expand a bit on the right information to Debbie C.:

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• I bought the creative cloud for students and cannot access the document cloud.

  Hello.  I bought the creative cloud for students and cannot access the document cloud.  I thought that it was part of the overall agreement, but it just says my trial has expired and does not allow me to do something.  My payments were made.  The only reason why I

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO?

  COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO? I ALSO USE COMPUTER #2

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• renovated, install XP SP2, valid and cannot access windows update

  Hello world

  I reformated my desktop PC, install XP SP2 original frommy OEM drive, valid and cannot access windows update.

  All solutions?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3-getting-error-0x8024400a/a71b55ee-10d4-410C-8b0b-a2114f7d8b94

  UTC/GMT is 20:23 on Sunday, October 28, 2012

• I have three problems___the is first I get the error messages form I mesh and cannot access my profile or friends list ' ___Microsoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  I get the error messages form I mesh and cannot access my profile or friends list '

  MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry

  For iMesh, you can go here...

  http://www.iMesh.com/community.html

  I don't understand the other two problems that you encounter.  If you please would explain what they are and what, if any, error messages that you receive.  Also, what antivirus do you use, and you run Windows XP SP3?

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• HP 190 t and cannot access network after upgrade to win 8

  Upgrade to Windows 8 and cannot access the internet on my desktop HP 190 t.  No driver available on the HP support site.  I can see received/transmitted data between router but that is as far as it goes.   Have ideas or how to get the chipset drivers or should I get another network card?  Everything else seems to work very well.

  I found the problem.  Norton Security Suite does not work with Win 8, causing conflicts.   I have remove the application configured defender and firewall Windows to maintain security until Norton product can support 8 Win.

• Strange behavior of startup and cannot access the tools-&gt; options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• No volume on the toolbar icon and cannot access the volume level

  When the computer stops unexpectedly, I lose volume icon. I can't accdd the volume icon in the control panel check to include the icon on the toolbar. I have sound but I can not access the volume level and have no volume on the toolbar icon

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  I suggest you try the steps below and check if it helps

  Method 1: Try to run fix it from the link below:

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011

  Method 2: Try the following steps to add the volume icon in the taskbar

  i. right click on the Start button and then click Properties.

  II. click the Notification area.

  III. put a check mark on the volume icon.

  IV. click apply & OK. Check if you see the volume icon in the taskbar.

  Method 3: If the problem persists, try the steps from the link below http://windows7themes.net/volume-icon-missing-in-windows-7-restore-it.html

  Hope this information is useful.

• SE error message: "nvlddmkm.sys not answer but recovered" and cannot access Starcraft II or LOTRO

  Original title: nvlddmkm.sys does not

  Just started having this couple weeks message. Killed or damaged at least one of my 9800 GT cards (SLI), which have been replaced under warranty. Who sets the part of the question of the display, but still cannot access to Starcraft II or LOTRO - connect and just get a black screen (have sound, no picture). Then the message "nvlddmkm.sys not answer but recovered" then nothing and having to use task Mgr to close the program. Here's the suspect: update the video driver (uninstalled old, clean install) which again helped a little but the screen remains black when entering the games. While they inspected the files, the file Nvidia\Displaydriver shows the new driver as the device Mgr when I check that. BUT then when I check the directory ofC:\windows\system32\drivers there is still an OLD version of nvlddmkm.sys. I'm sure that it is the culprit, but it won't let me delete it or rename it who were other corrections that I read about. I know that this is an endemic problem with Windows and has been for awhile now. ANY suggestions?

  Hi malomar,.

  1. This only happens when you play Starcraft II and LOTRO?

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Also check the Nvidia support link:

  http://forums.nvidia.com/index.php?showtopic=45605

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.