I have 272 active system fonts. Is this necessary?

Similar Questions

• partition 'Windows cannot delete the active system partition on this disk.

  I created a partition of HARD drive in order to install a system in multiboot using XP and Vista, but I did mess up the BONES of the two. Now I want to do a clean install of Vista ONLY, but I don't know how to get rid of the partition! * Example: Computer management > disk management > right-click on the volume (M) > Delete Volume * but I get an error: "Windows cannot delete the active system partition on this disk" can someone help me to get my Vista to original?

  P.S. I have the "Microsoft Windows Vista Home Premium32 - bit Operating System Disk" provided with my computer when I bought it new. Thank you! -Jeff

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  Delete the existing Partitions during the process.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  See you soon.

  Mick Murphy - Microsoft partner

• I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  can you help me register my creative suite premium adobe cs6?

  I have lot to save my adobe photoshop cs6, when I try it starts to load then stops and gives me the message "the activation system is not available at this time." What should I do if I continue to use my photoshop?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem

  The pdf I want to change has all embedded fonts.  When I try to insert a comma, I get the message, "all or part of the selection has no available system fonts.» Cannot add or remove text using the selected font. "Will I still have this problem if I'm updating from Acrobat X?

  You have the fonts installed in the system. This has not changed. (Having the police is not always enough, but it is certainly necessary).

• I have reset my system without disabling the acrobat 8.0 writer. Now when I am trying to activate I get message 'Maximum Activations exceeded', while trying to activate the software, please suggest what to do to activate...

  I have reset my system without disabling the acrobat 8.0 writer. Now when I am trying to activate I get message 'Maximum Activations exceeded', while trying to activate the software, please suggest what to do to activate...

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html . request a reset of count of activation.

• I managed to spill water on my MacBook Pro, Apple will know if I open just to check if the sensor LCI (water) have been activated? And if they somehow, this void my warranty?

  Today, I spilled a glass of water and it went all over my MacBook Pro keyboard. The laptop is less than a month. I did everything what is recommended - I turned off and returned upside down now and just do it sit down u with ventilation and a fan just next door. If I open it in a few days to see if sensors of water have been activated, this will automatically cancel my warranty even if they are not. I read that sometimes they get activated, so I would check.

  Water + computer means generally computer died.

  Turn the power off.  Leave it unplugged.  Find your backup.

  Let the Genius Bar to determine how much damage has been done.

• Could not connect because the maximum free accounts have been activated on this phone? I don't know what to do I have tired everything

  Im trying to connect to my iCloud with this new phone that I had and it won't let me. I restarted the phone completely and I Sven makes a new Apple id and I still get the same message. I don't know what to do from this point on.

  See if that helps - iCloud: the maximum number of free accounts have been activated on this iPhone.

• I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue?

  original title: password, logon problem

  I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue? I can't even logon to my computer.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• I have a xp system and I am getting the error message following, that c:\windows\system32\nimariwu.dll is not a valid windows image several times. How can I fix this problem?

  Error message for several packages of software that I installed, including Outlook and Adobe. Where can I get a copy of the correct file to copy on the wrong file I have. I have no installation disk, and need this file to be correct.

  Looks like some sort of malware infection.

  I suggest talk us a bit about your system and then run the scans indicate below, then when the scans is clean, the persistent problems.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  This will minimize back Q & A and eliminate guesswork.

  While you wait, I could do this:

  No matter what you use for protection against malware, perform the following analyses for malware, then correct any problems:

  Download, install, update and do a full scan with these malware free
  detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, then to solve any problems.

• "You don't have the appropriate permissions to perform this action. For more information contact your system administrator. »

  When I go to turn on the UAC through the Windows Security Center, a pop up comes to say "you don't have the appropriate permissions to perform this action.  For more information contact your system administrator. "How can I solve this...

  Also, when I try to run msconfig, I get a saying, "you don't have sufficient privileges to run the System Configuration.  Run this utility as a user in the Administrators group. "How do I that?

  Thank you for your help on this issue.  I tried everything imaginable, but had to reinstall windows vista and to clean the computer.

• I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file was not found.

  I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file is not found, can someone help me? Thank you

  I installed the 9 raw and everything is back to normal thanks for your email about /peyman

  Skickat fran min Samsung-enhet

• Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not allowed. Please reset them to $null and reconnect the server vSphere.

  Hello world

  After the upgrade to PowerCLI version 5.1 however I can't run even the simplest command because it always ends up with the following error:

  Get-VMHost: you have changed the world: DefaultVIServer and global: DefaultVIServers system variables. This is not aRA. Please reset them to $null and reconnect the server vSphere.

  C:\Users\Albert\AppData\Local\Temp\7900df01-f6c1-48c6-ac1e-047dfff90fb6.ps1:1 tank: 11
  + Get-VMHost < < < <
  + CategoryInfo: NotSpecified: (:)) [Get-VMHost], InvalidState)
  + FullyQualifiedErrorId: VMware.VimAutomation.ViCore.Types.V1.ErrorHandling.InvalidState, VMware.VimAutomation.ViCore.Cmdlets.Commands.GetVMHost

  Can someone please suggest to me how to fix the script for my v3.2.0 PowerGUI IDE can work with the latest PowerCLI in my computer laptop 64 bit Windows 7?

  Thank you.

  And I just tried with PowerGui (same versions of PowerGUI and PowerCLI you use), no problem.

  Must be something local on your desktop.

  Maybe try a uninstall/reinstall of PowerGUI?

• Why can I not access some of the fonts I have installed on my Mac? This never happened before creative cloud.

  I use a Macbook with the font book. I am not able to access all the fonts in the font by Illustrator book, which has never been a problem before the creative cloud. I buy fonts - they are some fonts free janky. They are .otf and there is no problem with the installation.

  Hi Eileen,.

  Fonts are not displayed to the top? Do you see fonts show in other applications? Try resetting the Illustrator preferences first. You have another like suitcase font management software? Are able to install other fonts and ask them to show you? Can you give us to download it for free. I can test on my end

  http://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  Thank you

  Scott

• Fonts I have installed in the font book are missing after the upgrade 10.11.6

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  cjohna wrote:

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  Use your backup Time machine restore.

  Your book plist police is located on via Finder > go > go to folder, copy and paste:

  ~/Library/preferences/com. Apple.FontBook.plist

• App sketches and system fonts

  When I try to open a new document from a model and specify iOS 9 UI, Sketch gives me the following warning: "some fonts in this Document are missing." " The following fonts are used, but it is not found on your system." It then lists a number of SFUI as SFUIDisplay - Semibold fonts. How can I solve this problem of fonts? I'm under El captain and the police are not in the system fonts folder. In fact, the SanFrancisco system font is a 'hidden' font that cannot be found.

  Here is a complete list of fonts Sketch App seeks.

  SFUIText-Medium

  SFUIDisplay-half-fat

  SFUIDisplay-regular

  SFUIText-regular

  SFUIDisplay-thin

  SFUIDisplay-light

  SFUIText-half-fat

  In conclusion, the error message said: "by opening the document will preserve the missing fonts also long text layers are unaffected.»

  I have the same problem, someone who knows where to find the fonts?