I have my premium photosmart hp connected to a router. my computer is connected to the same network. the s

Similar Questions

• I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Program network networking Internet website website URL website network

  I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband?

  Help!

  Hi Barry,.

  MSE is not the cause.  I suspect two things.  One, some ports in the firewall must be enabled to access the internet (your ISP should be able to tell) or you use a wrong port which is not activated, while the is correct.

  Second, you set up like a dial instead of a connection to the local network through the router (which must also be configured and secured if there is no wireless capability), and then the LAN must be connected to the internet.  Essentially, your network configuration is incorrect and must be corrected.  As a general rule, all you need to do is contact your ISP technical support and if you walk through the process over the phone.

  That's how I would handle it because even the experts here is perhaps not able to determine the appropriate settings for your ISP gave your versions of Windows and brands of routers and modems (and everything that needs to be connected).  They lose your business if you can't connect, and they have people who simply as for a life - often 24/7 - they are generally useful and really good in this.

  If that doesn't work (and I bet than that), and so that I could take you through it here in general with more information about your hardware, OS, ISP and other, this is the wrong forum for this.  You start here: http://answers.microsoft.com/en-us/windows/forum/networking?page=1&tab=all&tm=1300700638376.  Near the top, select your operating system from the drop-down menu to access the appropriate forum for your system.  Then post here like you did here, but give them all the details (manufacturer, brand and model of computer, network equipment, your exact version of Windows, what browser you are using and your network configuration).

  Good luck

  Kosh

• I have a HP Photosmart C5280 of Japan... Now I'm in the Philippines...

  I have a HP Photosmart C5280 of Japan... Now I'm in the philippines... cartridges here are incompatible with my printer... what should I do? your support page says that I have to reset my printer... How do I do that?

  I think you need to contact support to make this difficulty.

  Start at www.hp.com/support and click the contact HP link, once you have navigated to your local site.  Note that the instructions on this page I sent you to think you have cartridges for your new country available when you contact support.  You can find information of the cartridge for the country, you're now at www.suresupply.com.

• I want to install my Adobe Creative Suite 6 Design & Web Premium student and Teacher Edition on a new computer I bought. The new computer running Windows 8.1. Do I need to uninstall first from my old computer?

  I want to install my Adobe Creative Suite 6 Design & Web Premium student and Teacher Edition on a new computer I bought. The new computer running Windows 8.1. Do I need to uninstall first from my old computer? I bought the program in 2012. Is there anything else I need to do so because of the length of time and new technologies? I appreciate any help you can give I do it correctly. Thank you.

  you are authorized, until, two facilities, activations.

  If you already have two facilities, activations, disable (help > deactivate) one of your installation/activation before uninstalling.

  otherwise, do not disable and uninstall.

• Fax HP Photosmart C410 connects to the telephone line at home instead of the dedicated fax number

  I have a Photosmart C410a.  The machine must be connected to the dedicated fax line, and number of this line was introduced in the fax header.  However, when tested using the FaxBack Service, fax back called the conduct of the House instead of connected to the fax line.  The machine is connected directly to the wall and there is no dispatcher, etc., with the home phone.  The telephone number doesn't have to all be typed them into the C410a.  Any thoughts you may have on what might be happening would be greatly appreciated.

  Best,

  Scott

  RESOLVED: The problem has been an error with the FaxBack service - my camera was working normally.  The best way to test your machine is either send/receive a fax with a friend or with HP customer support.

• Photosmart C4599 connects to the wireless network

  System details: Windows 7 64 bit, HP Photosmart C4599 Limited Edition. Wireless network (Netgear router) with visible SSID and MAC filter.

  As the title suggests: my wireless printer is not connecting to my wireless network more. The reason that it is 'more' is because he used to work. But my wireless router has started to lose the internet connection - and I read somewhere that it might work to change the broadcast channel of the router (instead of channel 11 to 13). And it helped.
  But since then, the printer was not able to connect. I tried it back - and interruption of the internet connection but the printer worked (a little).

  I tell myself that I have to reset the wireless printers Setup, I don't know how to do.

  Ok.  I think that the issue would be with the channel.  It might be too high a frequency for the printer to communicate properly.  You can have a heavy traffic on any channel, it depends on what is around you.  I recommend trying channel 1 or 6.  You should be able to download a parser for your smart phone wifi see what are the channels have less useage.

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• When Photosmart C6380 connects to the router Netgear WNDR3400, internet connection lost.

  Using HP Photosmart C6380 wireless connection to a Netgear WNDR3400v2 router.  When the printer is on, all devices of lose the internet connection, but can be crazy.  Network WPA2 authentication. the printer shows WPA authentication configuration page so maybe that's the problem.  How can I keep my internet access while the printer is connected to the network?

  FRST, make sure that your router has the latest firmware.

  Let's define an IP address static and exeternal DNS of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• We have more than one PC connected to the same (IMAP) account, there is an error sending server and works as a single computer at a time.

  We have three computers to check the same email account (IMAP) and when more than one is not working and try to send a message is displayed:. 'Server offline [email protected] that the server may have dropped or there may be a network problem.
  Right next to Thunderbird on other computers, with only a computer connected to the error disappears, and everything works fine.
  When that happens, sometimes gives error when sending an e-mail, "error save message in sent" and the mail is not stored in the thunderbird or on the server, but is sent.

  Menu Tools > account settings > server settings > asvanced and reduce the number of connections from 5 to say 2 and see how it goes. I m the connection altogether on the total machines is the question can be reduced then should help.

  Seriously have several concurrent users is not a good way to manage an imap account.

• HP Officejet Pro 8600 Premium ceased to connect to the server to download applications

  After working perfectly for a few months, my printer is now "impossible to connect to the server" when I ask a crossword every day.  The printer receives and displays messages to my address eprint, and seems to work in all other means except Webscan.  I had to do a restore disc condition as supplied and a full restore of a backup complete recently, but downloading applications worked fine after that.  I have re-installed the software of the printer and all the cheques I seems good.  Any tips on what I should check or do?

  jerryq wrote:

  Same problem here. I have managed to disable the app function in the settings of the printer, but cannot access the settings of the application. Can we assume that this gadget is no longer supported by HP? It would be quite OK (noone really need), but then it should be an update of the firmware with the menu point deleted.

  -jerry

  @jerryq

  I could solve the problem by selecting "Delete of Web Services" in the printer.  This erases all your settings in hpconnected.com, so you will have to set up the printer again.  A bit tedious, but mine works again!

  When you select this option (located by touching the icon top left of the page 'Web Services' above 'Copy', then the 'Settings' button down), it resets the printer and display a new sheet "printer installation Instructions Important".  Take this sheet, because there the "request Code", you will need to add the printer to your existing hpconnected.com account!

  Log on to your account to hpconnected, and then press the devices tab.  Click on the button 'add a device '.  Enter the code to request the instruction sheet, and you should show active again.  The claim code is also the new email address for the printer, you can now change what anyone available.  Unfortunately, the e-mail address you were using previously is now unavailable, but you can simply add a single digit to make it familiar - i.e. "[email protected]" can be "[email protected]".

  Back in the printer and press the icon "Applications".  If all goes well, the apps should load up.  With mine, I had to turn off the power, unplug for 30 seconds, then turn it back on.  Tapping the Apps icon then (finally!) connected to the servers and all the applications reappeared!

  WyreNut

• I have a Vista Enterprise desktop connected to the local network, but the notification icon still shows disconnected state

  I have my Vista connected to the network and the "network and sharing Center" shows that it is connected and network is accessible, but the network in the status bar icon displays an icon showing disconnected state. How to solve this problem? Restart does not help

  Guru

  Check and make sure you have these services defined in this way. This initiative will establish whether there is a connection.

  1 - on the road - network Manual connections
  2 network list Service - auto-
  3 network Location Awareness - road - automatic
  4. bad Service Network Interface - on the road - automatic

• I have Windows Vista, can not connect, is the file 'another user '.

  Hi, I have Windows Vista Ultimate Edition.

  my computer restarted somehow while I was with her and now the only way I can connect is a folder named "other users". It asks me a username and password but I don't know what it will be. How can I solve this problem?

  Hello

  Try the methods here, but not exactly the same question that they should help to correct yours.

  Your files must be accessible by any ADMIN account in C:\Users if necessary to migrate
  to another account.

  -----------------------------------------------------------------------------------------------------------------

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have problems with my bluetooth connection. The computer will not receive files. (But can send)

  It's my computer specs:

  Acer Aspire 4741G
  Genuine Windows 7 with SP1 (full update)
  Trend Micro Internet Security

  Problems:

  Problem:
  (1) on the (Fn + F3) bluetooth connection
  (2) Bluetooth icon at the bottom right.
  (3) right click on bluetooth icon.
  (4) number, 'send a file' or 'receive a file' options.

  Problem 2:
  (1) successfully connected to a Blackberry curve 8900
  (2) I can send files to the handphone.
  (3) when the handphone sends the files to the computer: this message appears:
  (a) connecting...
  (b) sending file...
  (c) and then it stucks at 0%.
  (4) I have the feeling that the blackberry is trying to send the file, detects the computer, but the computer is waiting for a user input to receive.
  (5) maybe the problem is: nothing on the screen shows up to tell me to accept the file.

  Problem 3:
  1) click on the start menu
  (2) search for bluetooth. (Icon)
  3) click the icon.
  (4) nothing happens. O_O

  Can anyone help?

  Thank you

  Kind regards

  Yong Tze Shoong

  Hello

  I suggest you follow the method and check if it helps.

  Disable your anti-virus and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, try posting your question in forum Blackberry

  http://supportforums.BlackBerry.com/T5/community-home/CT-p/comm_home

• I have a folder in Thunderbird that is on my local computer. I misspelled the folder like TomTOm.

  I would rename this folder as TomTom using rename in Thunderbird.

  The program does not allow me to do what saying me that I already have a folder with that name. But I did not.

  Surely the ASCII for 'o' and 'o' are different.

  Someone knows a workaround solution.

  Thank you.

  Change to something different, like a TomTom1, then back to the desired format. Yes, indeed, o and O have separate ascii codes, but Windows chooses to ignore these differences in the paths. Basically, when you create a folder in Thunderbird, you create a file in your file system, and its name is subject to constraints of operating system everywhere on paths. Asterisks and oblique bars are completely avoided.

  It is also possible (but less), with an account IMAP-related, additional restrictions on access roads can be applied at the server level.