I have no sound on my speakers.
No device found blender.
No device found blender.
Install appropriate drivers for the audio hardware in your machine from the hardware manufacturer themselves for the operating system that you have chosen to run.
I uninstalled a lot of things now, we have no sound on our speakers
I suggest to follow the steps described in the article and check if this can help resolve the issue:
No sound in Windows
Also refer to this article and check if it helps:
Tips to solve common noise problems
I have no sound on my speakers. I have a sound card and a new driver has been installed when I upgraded from XP to Windows 7. Clues on how to solve this problem?
Is the sound card listed and enabled in "Device Manager" (from Control Panel)?
At the Windows update driver or manufacturers of PC support web site? If it's windows, it may be worth checking to see if there is the last available on the support site of the PC for your make and model.
Have you seen and run through this article - http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(
So the most common answer seems to be getting the correct driver.
I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.
I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?
But then after the reboot, I still have no sound.
So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)
in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.
Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).
But I still have no sound on my speakers.
Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.
Any help would be greatly appreciated! :)
Original title: speakers work not after fresh windows 7 installed, please help!
Thank you very much for your answers. :)
I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.
Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.
So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:
Resolution of Windows Audio playback problems
Which of these devices you want to troubleshoot?
Select the device that you are having problems with. If the device is not listed, select device are not.
Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).
Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).
Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).
Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.
So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.
So to summarize:
If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.
This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.
I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.
Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.
I have a new good enough computer, which works very well. I have a pair of speakers BOSE plugged into the spot of speaker (green circle) and I use a logitech headset. I've never had problems with swapping between the output of the sound until last night.
At this point, I very well sound in my headset, but nothing on the speakers. I checked in the control panel and it is said they work very well and are set to my default. Even when the headset is completely disconnected it does not work.
I tried to run the troubleshooting > audio playback and they couldn't identify the problem.
Welcome to Microsoft Community where you can find the answers related to Windows.
According to the description, it seems that you can not hear the sound from the speakers, this problem could be due to the settings.
It would be great if you can answer this question in order to help you further.
Have you made changes on the computer before this problem?
I suggest you check the sound settings, refer to the reference to the steps below.
a. Click Start, and then type sound in the search box.
b. in the search results, click sound in the list programs.
c. find your type of connection. If you have more than one type of connection such as HDMI and speakers, and then choose the type of connection to use.
d. in the Audio window, select your playback device and click set as default.
e. the default playback device selected, click on the button Configure.
f. click on your type of configuration of the speakers in the Audio channels.
g. click on the Test button to send sound to each speaker, or click on a speaker to send his individual him.
No sound in Windows: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows
We would be more than happy to help you if the steps above did not solve the problem.
I have realtek audio speakers on my built-in hp w2338h monitor. I'm not all sounds through the speakers. When I plug in the headphones, the sound is loud and clear. I have troubleshooted and updated but still not his monitor. When troubleshooting, it is said that it can not detect a problem. I have a sound card. IM at a loss of what else to do. Others that sound, the monitor works fine. Help, please!
Troubleshooting with the monitor speakers sound problems
Also try to update the drivers of his last.
I hope this helps.
My computer has been repaired a month ago. Its worked before but not after bringing the store.
Hi Anne,.Thanks for posting your question on the Forums of community of Microsoft.From the description of the question, we understand that there is no sound from the speakers to the computer.Let me go ahead and help you with the issue.If you could answer a few questions that would help us resolve this problem:1. don't you make changes to the computer before the show?
2. What is the brand and model of the computer?
3. what version of the operating system is installed on the computer?4. do the sound problem only occur when playing a CD or watch videos of youtube?5. what web browser do you use for videos of youtube?I suggest for the link and follow the steps in the article following the operating system installed on the computer.No sound in Windowshttp://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Also see links:No sound playing an Audio CD in analog Mode on USB speakersAdjust the sound level on your computerTips for solving common audio problemsHope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
I suddenly have no audio service. Message: 'windows audio service is not enabled... ". No audio device is installed ". What should I do to get sound to my speakers?
My computer was working well, but suddenly I have no sound at all. I think my kids could snap buttons and be uninstalled my audio or disabled my sound somehow. Please help me get my sound back. I can play DVDs but only without sound, I can watch my Netflix but only without the sound, I can watch Youtube without noise, etc. etc. Help, please.
Moderator moved this thread to Windows music and its Forum Forum for feedback.
Windows operating system, please.
If this comes to pass, try a restore the system to a date and time before the audio gone.
As a first step I disconnect and then reconnect the speakers and it would work again, but so far nothing.
1. don't you make changes on the computer before the show?
2. which version of the operating system are you using on the
Try the steps in the link and check if this may help:
No sound in Windows
If you use windows vista and windows 7, you can try the procedure described in "sounds of my speakers is crackling or distorted" link and check.
Tips for solving common audio problems
Tips for solving common audio problems
I'm not all the sounds from my computer. I recently inherited this system a deceased relative, and I didn't have administrator rights to allow me full access, I'd need to ranked online. I didn't start the disc originally supplied with the unit is full. I made a disc that I ran to allow me to at least get a new online administrator rights but since reboting I do not have any sound and did not have the complete software for Microsoft Vista how can I get my sound back? and how I can bring my computer back up to date in its functions?Start the second then the first automated services troubleshooting herehttp://support.Microsoft.com/GP/mats#TAB0--..--"Mike Cee" wrote in message news: 78f768f8-FCC - 41a 7-871 a-37030460c 556...> I can not all the sounds from my computer. I recently inherited this system> a close deceased person and I did not have the administrator rights to enable> me full access, I needed to ranked online. I didn't have the full departure> disc initially provided with the device either. I had a single disc> which I ran for me to administrator rights to at least get a new online> but since reboting I do not have any sound and don't have the full software> for Microsoft Vista how can I get my sound back? How do I bring my> computer back up to date in its functions?
I just bought a Toshiba Satellite C655 and I can't not all the sounds from my speakers.
I do, however, by small internal Laptop speakers. I looked at the configuration of the card its (Conexant CX20671) and cannot find a way to select a configuration of external speaker. I use the good line jack (not the headphone jack), so I'm really confused as to what is the problem. What is this audio driver compatible with my external speakers (Logitech Z-540)?
Thank you for your help.
Just a simple question: have you tested other external speakers or headphones?
I mean if the internal speaker is working properly, it's is not a problem of playing the sound because you can hear the sound.
So in your case I test headphones and try to update the audio driver from Toshiba Web site.
I upgraded my desktop HP Pavilion Media Center a1450n PC to Windows 7 successfully except for sound. My speakers are integrated into my screen LCD 17-inch HP vs17e and Windows 7 can not detect my built in speakers, I downloaded most every sound driver out there currently is there something escapes me? Can anyone help to draw sound from my speakers monitor integrated in the Windows 7 operating system?
You have Realtek Audio, which is usually installed with 7 drivers builtin. That means your device errors, yellow have_any Manager! s?
Choose High Definition Audio Codecs, contract, then download the "Exe" file:
My brother has a Toshiba Satellite Pro A60 - my old laptop. However, it has a strange sound question. I wiped it a few months back, and the sound worked fine. However, after a week or two he suddenly started to sound like the speakers were blown out.
I made the assumption that stakeholders were indeed blown and connected to external speakers - but they made the same noise! I was wondering, this sounds like a card his fries, or a drivers/software error?
If it is a mistake to sound card, the sound card can be changed?
without changing the card its couldn t, it s on the motherboard and if you want to Exchange, you must exchange the motherboard together.
First question: did you always guaranteed on this machine?
Then my suggestion:
Back up the data on the machine, the recover with the recovery CD and then the noise should be gone. If not, and if you still have warranty on this machine, so it would be better to bring the machine to a service partner for a checkup of material.
Give some feedback if you have any additional questions.
I would ask for assistance if there is what I can do to have a very powerful sound on my new laptop Toshiba satellite L755 - 1 CD.
I put the speakers at the highest volume possible, but sound from its speakers is very, very quiet, so I can't listen to music if I am just a few meters away from my laptop or when my friends call me on Skype.
Sometimes I can't hear the sound if I'm not very close to the laptop. It has to be really quiet in the room that I hear music or talking to someone on Skype. The sound is not bad, just too quiet.
It has speakers onkyo and I thing that they don't work well, or the volume control is not properly set.
PLS, let me know if I can improve the volume elsewhere that in its volume control (I put the volume louder) or can I save somehow if my speakers are working properly.
Thanks in advance.
> Sometimes I can't hear the sound if I'm not very close to the laptop. It has to be really quiet in the room that I hear music or talking to someone on Skype. The sound is not bad, just too quiet.
Have you noticed that silent sound using Skype only?
If Yes, then I would recommend checking the settings of Skype.
There you will find the audio options for microphone and speakers.
In addition you can got to control panel-> sound-> the Read tab
Here, you mark the speakers press the properties button. New window should appear and there you have to choose the levels tab. Here, you can increase the volume level too.
Hi, hope someone is able to help me please. I have a HP Pavilion dv2000 laptop and have downloaded Windows 10. Since then, I've lost all sound. Have done everything to my computer, HP and other Councils site Web, I still have no sound. I even turned off all the speakers etc. rebooted the computer and re-abled pregnant again - still doesn't work do not. I'd love to hear again the videos etc and some of my work is that I find it extremely frustrating. Thank you very much.
The reason why the driver was not installed was because the folder of Hermosa has different hardware ID than the one you posted.
The hardware ID you have posted is in the folder of Venice, a so go through the same steps again but this time browse to:
C:\SWSetup\sp40270\Venice\V64\wisVenya and select the Conexant HD Audio device in the list and see if the driver is now installed.
Maybe you are looking for
Very well done on my Photos app on my iPhone 6 under my default 'All the Photos' folder I have 343 Photos. When I connect to my Mac Air via a cable lighting iTunes opens automatically, but says only I have 67 photos to download. My question is where
My Internet Explorer, MS Paint and other accessories are absent from my computer, I tried to reinstall them with my XP CD, with no luck, no matter what I do to reinstall it will not load. Whats missing I can't reinstall is: THAT IS TO SAY 8 MS Paint
I have a x83vb from asus with WinVista SP1 64-bit and every time I have try to launch an update that it gives me Windows update error 8000b 0100 and ive tried system, Ive update readiness tool used the fixit now normal and aggressive, ive run manual
I have created a full backup (?) on an external drive (F) IOMEGA since January 09 weekly.I use 'COMPUTER' that shows drives C & f. I put my cursor on C and click on & select COPY.then I put my cursor on F, click on and select PASTE. procedure shows t
After reading all of the similar queries about 'Safe to delete Windows.old', I'm still not sure and would appreciate any constructive help. Before you reinstall Windows 7, I copied all my files, data, etc. on an external hard drive. After re-installa