I'm trying and do not reinstall windows

I won the war to reinstall my laptop, it was installing just the sotware when all of a sudden he erased and to my horror, I realized that the driver of the battery was out! So when I restarted (with the battery driver in) I received the message that "windows setup cannot continue, click ok to restart and restart the installation" but the prob is that I don't remember how I started it in the first place I was just pressing f8 f12 f10 and came across something that worked. My laptop is not come with an installation cd that was already installed so any help would be graciously received (his 2.30 in the morning and the only time where I can pinch my computer laptop girls to write this) thanks

For questions re using the software/process of recovery of the computer manufacturer, you will need to contact them.

This isn't their recovery process, Microsoft.

Here is the General information on use it:

How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Computer turns Off at the start and can not reinstall windows

    Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.

    Please HELP, it's so sad. I will not buy another Windows computer.

    ~ Paul Côté

    For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.

    This isn't their recovery process, Microsoft

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    To reinstall from a Microsoft Vista DVD:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    To install Ubuntu:

    http://UbuntuForums.org/

    See you soon.

    Mick Murphy - Microsoft partner

  • Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

    Original title: Windows 7

    I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

    I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

    Thank you

    New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

    This is how the recovery partition is accessible to most popular brands...

    For Dell, press CTRL + F11 directly after switching on the device

    For HP, press F11 directly after switching on the device

    For LG, press F11 directly after switching on the device

    For Toshiba, press and hold "0" BEFORE and during the power upward

    For Acer, press and hold ALT + F10, as soon as you see the logo

    For Asus, press F9, as soon as you see the Asus logo.

    For Samsung, press F4 to the power upward...

    For Fujitsu, press the F8 key directly after the power

    Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

    Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  • Reinstallation discs isn't and can't reinstall windows 7 to upgrade to windows 10

    Original title: reinstalling Windows 7

    My computer laptop windows 7 currently does not have an operating system on it due to a technical error. However, I have not all re-Setup disks and impossible to reinstall windows 7 to upgrade to windows 10.

    I found the link https://www.microsoft.com/en-gb/software-download/windows7 where you can type the product key for portable computers to download an iso file of Windows 7. However, my product key doesn't seem to work, and I can't find another way to get the files of windows 7, which I am legitimately entitled to.

    Any help or advice would be greatly appreciated.

    You will need to get an installation disc to a friend that has the same version and 32 bit or 64,

    Or contact the manufacturing of computer for the recovery media

    It's that or use google and search for a torrent with a torrent client download

    Use Digital River mirror or pcsteps download ISO windows 7 legally and for free as your search ;) terms

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/clean-reinstall-Windows-7/0ae269fd-167e-423B-94EF-26133f89e10c

    You can get a clean here qbittorrent

    https://ninite.com/

  • Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

    Hello

    See how you go with this great piece of software.

    http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

    Concerning

    GT4U

  • When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

    Acer E5-471

    When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

    Hello

    1 power off the device
    2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

  • How can you recover files, folders, software and drivers after reinstalling windows xp family?

    original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

    When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

    Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

    On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

    Hi MarkS_02127,

    Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

    I hope this helps.

  • Error message after trying and do not access the Article, press release or Social Bookmarking sites from the newly installed software.

    The message below appears, after having tried and do not access the Article, release press, or Social Bookmarking sites; Since the software newly installed.

    ((Accès àle chemin c:\Program Files (x86) Dotcom Marketing / Auto System X references xml traffic is denied.))

    Does anyone know how to overcome this problem.

    Original title: Error Message

    "since the newly installed software? What software? Have you checked the manufacturer's website to see if they have a solution?

  • My computer crash and I already reinstall window and I need to reinstall the cloud adobe creative

    My computer crash and I already reinstall window and I need to reinstall the cloud adobe creative

    Smartofficesolutions4u and Camille C. Laflamme please see CC help | Install, update, or uninstall applications for more information on how to install the Adobe Creative provided with your membership application.

  • I reinstalled Windows XP home and can not use Windows update.

    As indicated in the title, I'm frustrated because I can't use windows update after reinstalling Windows XP. I tried to register again the installer and downloaded and installed two windows install files, 3.1 v.2 and 4.5. Nothing has helped and I get the message ox8024400A eroor. FixIt has been no help. Any advice what to try next?

    This can help...

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a

    Tricky

  • Windows Update deleted Norton and will not reinstall. How long can we operate in Mode safe? Ramifications of this?

    I spoke several times with Norton. System Restore was successful a couple of times, but Norton that was in place during this period is no longer present. I'm exploited only in safe mode and do not know how this works, either; It's very limiting.  COMPUTER geeks have determined that no virus or hard drive interest. The computer is unbelievably slow without safe mode, as so well to exploit.  It started mid-October with a Windows Update.  Norton has been reinstalled and worked for several weeks until another Windows update.  I uninstalled and reinstalled Norton until I'm blue in the face and it's still wobbly.  Any help and suggestions would be so appreciated.  Thank you ~.

    Hi TaraYA,

    ·         What happens when you try to install Norton?

    ·         You receive an error message?

    ·         Did you do changes on the computer before the show?

    Windows Update does not remove any safety program. However, you can check the program installed on the computer or not?

    To search for a file or folder, see the following article:

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

     

    Add or remove a program overview

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_addprog_window_component.mspx?mfr=true

    I hope this helps.

  • My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

    My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

    Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

    What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

    I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

    Thank you very much.

    In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

    Hello

    Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

    ASUS support

  • SA40 has no startup options and does not load Windows

    Hello everyone

    I just met my first problems with my SA40-702. I got it about 2 years and everything was fine.

    The machine will not start is no longer in Windows. He's sitting there for hours with the screen of boot of windows XP, the bar of scroll nothing happens. I tried to access the CD/DVD drive to reinstall windows, but I can't boot from it!

    I have had so much try 'C' nothing happens.

    I tried "F12" nothing happens.

    I tried several copies of windows and the boot disks, but there is no success.

    I was in the BIOS and removed the password so it now reads "unregistered" I am unable to change the menu boot options. All that I can change it is time and the password.

    Any help on changing the options of startup, or as to why the machine will not let me choose the CD as boot device would be appreciated.

    Infact I can't choose ANY boot device.

    As far as windows goes all start attempts including safe mode etc do not work. They just plant rather then wait eternally for restart.

    I hope someone can help!

    Thank you
    Richard

    Hello Richard

    Usually, if the supervisor password is set, you can have this kind of problems and you will not be able to enter the BIOS settings. I put t really know if someone put the supervisor password and this way I can't help you.

    You are the owner of this device or using it in your business?

  • Laptop will not reinstall windows after the factory system recovery

    So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

    After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

    The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

    http://welcome.HP.com/country/us/en/contact_us.html

    Problem with the HP recovery process, contact HP at the link above.

    This isn't their recovery process, Microsoft.

    See you soon.

    Mick Murphy - Microsoft partner

  • Recovery Does not reinstall Windows on HP Pavilion dv5 - 1127cl

    Hello

    Recently, I tried to do a reset to factory my laptop. I used the recovery partition by pressing F11. He traveled all the HP software reinstall it but then would randomly turns off when you try to reinstall windows. I tried the process of recovery time and time again and got the same result. The recovery discs are not available for my computer as well.

    My product name and number: HP Pavilion dv5 - 1127cl

    Operating system: Windows Vista 64-bit

    Error message: Windows could not complete the installation. To install Windows on this computer, run the Setup again.

    Any input on this would be a good thing, I was very frustrated trying to get this to work. You wouldn't think your recovery would fail, seems to be a very important option to the computer!

    Recovery of the disks available here for $27:

    http://www.computersurgeons.com/SearchProducts.aspx?SBT=dv5-1127cl&BKM=results#results

Maybe you are looking for

  • Could not load most pages (amazon, google, etc.), but can load yahoo. How to make all the pages to load?

    Firefox working fine until this morning. Try to access amazon, but get "the connection has expired. I tried google, got the same. Tried another site for a local store, got the same error. But I tried Yahoo mail and it loads fine, including being able

  • Wait for activity on front panel

    Hello I have a while loop with a counter (shift register), in which Im can choose how many times its going to count. This loop is used to allow a data in a economy another loop via a local variable to activate it on the VI "write to messurement. Now,

  • Network printer error code is 0x000006be

    Original title: code__ printer error My network printer is visible. Test page does not print error code is 0x000006be What does that mean?

  • printer cannot be contacted over the network

    I have a HP deskjet 656 printer that I added as a network printer. I installed it on my computer laptop windows 7, which went well. However it does not print. The touble shooter printer tells me to 'the printer cannot be contacted over the network. I

  • Problems with dial-peer between routers cisco 3925

    Good afternoon... I have a problem when we want to connect telephony between two routers 3925, on both routers and I configured the telephone service (phone service), I released my phone and there is an internal communication in each of them (I can d