Iball USB TV tuner, model is claro tv does not.

Similar Questions

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• I recently downloaded Adobe Reader dc... I am trying to open a document on my USB... However the file does not open. It says "file not found".

  I recently downloaded Adobe Reader dc... I am trying to open a document on my USB... However the file does not open. It says "file not found".

  Hey sam1502,

  Let me know what happens if you copy files from the USB on your desktop, then open it in Reader.

  If the error persists, then try to disable the Protected Mode under ' Edit > Preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• Export model data as xml does not work

  Export model data as xml does not work

  Please advice on this subject? I created a template with editable regions - index.dwt, but when I try to export the model as xml - it is greyed out. I read another thread in this forum, but I'm not clear on the second stage of the given statement. Please click on the header to see step 2 on a previous thread.

  Please notify.

  THX

  Now that you have a template file, you can create a page by using the template file. Have a look here http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ef da.html.

  Once you have created the page, you can export as XML.

  GRAMPS

• Satellite 105-S157: USB 2.0 via a PCMCIA card does not work

  I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
  It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
  If I can access usb PCMCIA ports.

  This laptop does support USB 2.0?
  How can I make it work?

  Please help?

  Thank you

  Hello

  It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
  Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
  If the USB device use a higher power, the OS cannot recognize and activated the device.
  In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• Peripheral USB take two tests at work and does not start with Time Machine drive connected

  I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:

  

  I am running the latest version of El Capitan, 10.11.4.

  My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.

  In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.

  My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.

  Thank you, everyone.

  Try this-

  How to reset the NVRAM on your Mac - Apple Support

  Reset the management system (SCM) controller on your Mac - Apple Support

• Internal TV tuner for the Qosmio G20 does not work

  I have a qosmio G20 and the built in TV does not work, I reinstalled the driver and the program windvr 5 but no response.
  Whenever I start the program, I can't use the installer.
  Please can someone help me?

  Hello

  Qosmio G20 was delivered with Windows MCE.
  You can also use the Media Center Microsoft watch TV on the laptop!

  Please check if the built-in TV tuner works with MCE. If so, there is nothing wrong with the tuner or the drivers!

  Best regards

• HP Pavilion 20 via a port usb/VGA connection to monitor additional 20 "does not work

  It's all in the title. Several people on the internet told me to buy a usb cable to vga to connect an external monitor. I did it and it does not work. Can you help me?  I have windows 8.1.

  HE will get another. cable converter, best I'll try it and then I'll come back. Thank you very much for your help!

• After disconnecting device USB to the laptop on Vista, now does not arrested

  IWAS downloading the pictures on my computer mobile partners with a usb device, he repeated that he was doing it & green bar kept moving, but nothing happened

  He has to go to work, he said take the computer usb device
  went to start menu to close, he repeats for nearly an hour now - logout...
  Help, please
  * original title - DON'T LOG OFF / SHUT DOWN - WINDOWS VISTA - JUST SAYS LOGGING OFF... *.

  Hello

  Force stop your computer, reboot and attempt to logoff or shut down again.

  Let me know if the problem persists.

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• Pci usb 3.0 of fresco logic card does not

  OK, so I was of the first usb 3.0 the fresco logic card. This card works perfectly under Linux so I know the card works. The card is labeled fl1000g and taken in a PCI standard and has a usb port.

  My computer is:

  HP elite 8200

  Windows 7 Professional 64 bit

  Processor: intel core i7 2600

  RAM: 12 concerts (upgrade to 32)

  Power color ATI Radeon HD 7750

  Windows driver attributes to him is "PCI standard PCI to PCI (filtered Matrox) bridge" I tried to download the drivers of Fresco Logic, looking for updates to windows, help options, remove the driver faulty and much more with no success. I tried many drivers, no matter what I do, windows keeps assign the same wrong driver. The fresco logic drivers keep saying that "there is no usb 3.0 found fresco logic controller. I believe that since this card once worked in windows but now does not work, the device id has been removed from the list of device or windows hardware? The hardware id is:

  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000 & REV_AA
  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000
  PCI\VEN_10B5 & DEV_8112 & REV_AA
  PCI\VEN_10B5 & DEV_8112
  PCI\VEN_10B5 & DEV_8112 & CC_060400
  PCI\VEN_10B5 & DEV_8112 & CC_0604

  Thank you for your time.

  try to uninstall the device from Device Manager driver and reboot and see if it works

• USB headset connected to PC speech recognition does not work

  * Original title: can not make headphones work

  I installed a software that involves speech recognition.  I plugged my USB to the PC headset, but when I tried to use Set Up microphone in the control panel / recognition speech nothing works.  I have connected the headphones to an other PC Win7 and it works perfectly, in fact I could stop using a keyboard.

  I reconnected the headset with the first PC and still nothing happens, but I see a message saying "recognition speech could not start checking the Audio devices and sound themes".  I can't find it.

  I looked in devices and printers in CP and found the helmet (C-Media USB headphone set) when I look in Properties / General there is a message "device cannot start (Code 10)".  When I check the driver tells me that the driver is up-to-date.

  When I shut down and restart the PC with headphones connected to a USB port on the front of the PC, I hear a small amount of Crackle, but nothing else.  As I have already said, there is a message on the office, 'recognition speech could not start. and "speech recognition could not start checking the Audio devices and sound themes"

  I have run Windows Update to see if there is an update there, but it makes no difference.

  How can I talk to my PC using my headset?

  Thank you

  Tregarth

  I tried 2 different USB ports on the front of the PC, no improvement.

  I also looked into devices and printers (in Control Panel), the helmet does not show.  Also, when I look in device in CP Manager there is no exclamation point in audio, video and game controllers.

  Usually, the front USB ports are connected by cables (often not armoured or not) to the USB controller in the back of a box of the desktop computer. If you haven't tried a rear USB port, please do. If your laptop no matter what USB port should be good.

  You cannot control Audio through devices and printers. You don't say what version of Windows you are using. If you use a version of Windows with a bottom taskbar, RIGHT click ON the speaker down icon to the right of the taskbar. Select the recording devices. This will open the acoustic window. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. This should solve your problem.

  Marty

  

• Application of model names naming standards does not (consistantly)

  I'm trying to understand the logical steps the application of naming standards to the columns in the paintings.  I say this because sometimes it does; but most of the time it isn't.  I noticed this strange behavior last night as he tried to apply my criteria for assignment of personal names but, for the life of me, couldn't understand the logical steps to do.

  I have my own standards of naming template as shown here, which are the ones I want to apply:

  

  Now, for example, I create a new table called customary ADDRESS with the columns and data types.  For the primary key, I ADDRESS_ID , and in order to exercise, I put in the CITY, STATE and zip_code "Mandatory" (or NOT NULL).

  When you go down (or double-click) on ADDRESS_ID or zip_code to display the properties for these columns, you will notice that the 'constraint name', 'Not Null Constraint name' are all empty - as it should.

  

  When I returned to the table properties dialog box and click naming rules, another dialog box appears allowing me to select which specific naming rule, I would like to apply.  I keep all selected one, click OK.  However, when I now explore the ADDRESS_ID, CITY, STATE or ZIP CODE, there is no constraint names based on my model - at least not immediately apply (for some reason any).

  As a work around for me, if I pointed out, say, zip_code, click on the naming rules , and then click OK, then click apply and again double-click zip_code, constraint name would eventually appear.  However, it is never uniform.

  

  The zip_code with the not Null constraint name column has finally appeared.

  

  We should also not the standard naming PK never applied at all.

  Why it does not work - is this a bug?

  What I am doing wrong?

  Is there another way to do this?

  Hello

  Thanks for the report detailed the constraint not null not defined by the standard naming Wizard. I logged a bug.

  Philippe