iCloud preferences hangs (after put 10.11.4 to level)

Similar Questions

• Btrfs-cleaning frequently stuck at 100% CPU after put 6.4.0 to level

  Given that I have improved my RN102 to 6.4.0 last night I often struggle to reach the admin interface, and my laptop was reported not being able to join Time Machine.

  When I connect by ssh and use 'top', I see that btrfs-cleaner is stuck at 100% CPU. This can last up to 10 minutes at a time. I only installed about 12 hours ago, and the process of btrfs-cleaner has already more than 85 minutes of CPU time, which is 20 times more than the process of the second long, readynasd which is 4 minutes.

  After a while, btrfs-cleaner falls to 0% CPU and I can access the NAS normally.

  My question: is it normal to have this excessive load of btrfs-cleaner so frequently? Y at - it no configuration setting which affect this behavior. I never noticed this problem under the previous version 6.2.5.

  See you soon,.

  Joachim

  Where it's important, my NAS is equipped with 2 x 4 TB drives in a RAID0 configuration with 40% in use.

  It seems that I found a way to get rid of hanging btrfs-cleaning: after turning off the quota

  Btrfs quota disable/data

  Btrfs-cleaner never appear again (top).

  (After startup, I've usually had a minute to publish the command before btrfs-cleaner spawn and prevented the command answer.)

  I did not intentionally quota - I guess that it is enabled by default.

  Good luck

  HansW

  PS: Maybe the problem is known by Netgear - in their 'FAQ on recent firmware 6.4.0' (see the link at the top of the page) we are talking about «...» "This is probably due to the ReadyNAS was conducting an audit of quota.

  Some sites also describe problems with quota and btrfs (forum Rockstor), other sites quoting quota support in experimental btrfs (but these may be updated).

  I did some tests deepened after diabling quota like that--I'm happy that I have can see my files again...

• Finder sidebar language and CPU problem after put 10.11.2 at level

  Hello

  I noticed a really annoying problem with the Finder and the sidebar... after reclassification of Yosemite to El Capitan.

  CPU takes up as much as 90 to 100% power. I have to restart the Finder every 10 minutes.

  Issues such as Applications, downloads and Desktop change Danish to English in an infinite loop.

  Research of the internet and this forum suggest that I'm not the only person who has experienced this problem.

  None of the proposed solutions (later October 2015) solved my problem, although

  Some users have reported solutions such as:

  • Delete and reset the .plist files https://discussions.apple.com/thread/7258312?start=0&tstart=0 finders
  • Clear cache Finders
  • Remove all third-party software

  None of them helped.

  I'm going nuts... and really hope that someone can help me with this problem. I'll be very grateful for any advice or idea what is or could be the problem.

  All the best,

  Erik

  OK... I could be something here...

  If I disconnect my ICY BOX (IB-RD3640SU3) USB Raid - finder works perfectly again.

  Sofar so good! But this is obviously not a solution, as I have four external HD that I use in my work.

  What should I do now?

  No firmware on the ICY BOX to update...

  Any chance that the bus/USB port does not work properly in 10.11.2?

  Any suggestions will be much appreciated.

  THX,

  Erik

• FglAM lack of FMS after put 5.6.2 at level

  Hi there, new to the discussion group. I need help so hear I am.

  We have an internal sitting FMS server and FglAM server sitting in the DMZ acting appointments as a hub. We have several Fglam server running .NET monitoring pointing to the hub. We ran 5.5.8 and I just upgraded to 5.6.2. After that I updated the server of FglAM of the demilitarized zone have disappeared.

  2012-02-01 14:06:07.017 ERROR [before the election-0] com.quest.glue.core.comms.transport.http.Client - error transmitting the message to the upstream https server:...

  My FglAM server is configured to listen on this port

  If I remove this configuration file and restart it to connect to the end FMS server. If I readd it connects then I shortly after I receive the error above agin.

  I have a free signed certs installed on the FMS server.

  Something was changing in 5.6.2 I don't know?

  Any ideas?

  Finally heard of support. Looks like we hit a known bug.

  My development confirmed that the question you wereexperienced, it's a bug and defect id FAM-3911, this problem occurs because the hub FglAM 5.6.2 receives mail from an older than 5.6.2 thatís FglAM downstream.

  Workaround upgrades all downstreamFglAMs to 5.6.2 to match the version of the hub.

• Worklist errors after put 12.1.3 at level

  Hello
  Earlier, I have improved my VISION instance to 12.1.3. Everything went well, but now when I connect as long as sysadmin, I see a lot of error in the task list in the home page. What are they and how can I get rid of them?
  
  Thank you

  DBA_1976 wrote:
  Hello
  Earlier, I have improved my VISION instance to 12.1.3. Everything went well, but now when I connect as long as sysadmin, I see a lot of error in the task list in the home page. What are they and how can I get rid of them?

  Thank you

  Please see the following links/docs.

  The SYSADMIN user gets thousands of Notifications WFERROR [ID 1299167.1]
  How to remove the list of tasks [ID 357904.1] error Notifications

  http://forums.Oracle.com/forums/search.jspa?threadID=&q=purge+and+notification&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  http://forums.Oracle.com/forums/search.jspa?threadID=&q=purge+and+workflow+and+notifications&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• MBP running El Capitan hangs after login

  Today, my 2011 15 to the Macbook pro mid hangs after login to the admin account. The status bar does not appear, or the desktop icons. Nothing does, and I need to force the shutdown to be able to restart.

  These are the things I've already tried:

  • Restart in safe mode: the desktop icons will appear, but all crashes after a few seconds. I think since safe mode does not work, the problem with the Finder, DS_Store problem, icon, or a problem with iCloud. So I went to the next step.
  • Running the tool of first aid disk utility in OSX (restart + Cmd + R) recovery tools: it indicates that the drive is OK.
  • / Sbin/fsck - FY running in single user mode: the drive seems to be OK.

  I don't know what to try next. Since I really need my computer for the next few days, I could go to an Apple store later this week. Of course, I would be really happy to avoid the costs of this option.

  Anyone of you has an idea of what I should try next?

  What safeguards do you have?
  You have another account that works?

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• iPad 2 Air: icloud drive hangs in "upgrade".

  Hello

  My icloud drive hangs in the upgrade. When I try to save it gives about 30% and stops.

  I tried to access my icould drive via iCloud.com and he says that there is an error.

  I have installed IOS 10.

  can anyone help?

  Try either a restart - restart your iPhone, iPad or iPod touch - Apple Support or if it does not, perhaps signing of iCloud, wait a few minutes, then reconnect.

• Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Try to go here and see if you can add them to your Apple ID.

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• iCloud preferences error

  I've been struggling with a particular Contact that is on my iphone and ipad, but refuses to sync to my Mac and iCloud.com

  Search through similar questions online I found tips that I should check my iCloud preferences, but when I go into Preferences system and iCloud I get "error in preferences, there was a mistake in iCloud preferences." I logged off, rebooted, signed on iCloud or but still get the same problem (and the contact does not always sync). I tried to check messages, log on to the Console, but does not know what to look for, or what the messages to include in this post to identify the problem.

  I am El Capitan v 10.11.4 running on my MacBook Air to 2013

  Any help to fix this would be appreciated.

  Interesting, I have the same problem with similar settings, El Capitan 10.11.4 on a MacBook Air mid 2012 and an Iphone 4. I get this message "Error in preferences, there was a mistake in the iCloud preferences" and when I look at the devices in system preferences > cloud > devices, only my ipad comes. I spent hours on this point, does not.  Looks like I have at least a sync, but my phone is not displayed.  I'm new, last night at El Capitan and new in iCloud.  but since I see similarities in equipment and software, maybe it's a little problem with these models and El Capitan. The CHPguy, your mac initially with the Lion as the operating system?  Mac fans with advice? Thank you!!!

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

• Could not load iCloud preference pane.

  MacBook (retina, 12 inch, early 2015)

  OS X El Capitan 10.11.3

  When I go to System Preferences and click the Icloud/Internet account settings, it would not load and it would show the error "cannot load iCloud preference window '.

  Now my mail, calendar, imessage app will not work

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite M50 226 hangs after the victory of logon Wlan is turned on

  Hello everyone,

  I had a problem with my satellite m50-226.
  It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.
  When I type my user password nothing happens and a few seconds later, the background appears but nothing else.
  When I restart the laptop the same problem occurs. only when I turn off the wlan card, I can start the computer successfully.

  Maybe anyone can help me?

  thanx.

  welcome them
  Alex

  Hello Alex

  I am very interested about your problem and it is interested to know if this problem persists if the unit wakes from sleep or hibernation mode.
  Can you please verify this?

• I get cannot load the icloud preferences panel and cannot access the photos

  I upgraded to Yosemite and now my photos do not recognize my icloud shared photos.  I tried to open the icloud preferences to ensure that pictures are always enabled but I get "unable to load the icloud preferences panel" every time.

  Suggestions?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.