IdeaPad 500 - BSOD crash

Similar Questions

• IdeaPad 500 - a black screen during Normal labor

  IdeaPad 500 - a black screen during Normal labor

  My 500 Ideapad is a month old. After a few days with her, I saw that in the middle of my normal work (Word, Excel, ETC...) My screen turn Black and will never go back. Only with the black screen reboot goes normal again.

  What should I do here?

  Thank you

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• New Ideapad 500 has no test Lenovo Solution Center

  Hello

  I just got a new Lenovo Ideapad 500 and test the Solution Center, it will return the following errors:

  Result code: WVC003002-RK8XFE

  Device: Intel(r) HD Graphics 520

  Mathematical operations failed

  PCI/PCI-e test failure

  WMB008000-RK8XFE

  What should I do? How can I solve this problem?

  Thank you

  
  

• Having intermittent BSOD crash

  Having intermittent BSOD crash.

  Hello community, I had intermittent crash or BSOD problems for about six months now.

  I know: cannot reproduce the crash at will. Seems to be intermittent without real reason. System can work several hours or even days without any problem. Then I can have several accidents within minutes of each other. I installed Windows office in 2013, the situation went from bad to worse, extremely. Of course, I ran system restore to get rid of this problem.

  Efforts in case of problem: I ran mem 86 tests overnight, (note I have 64-bit system then of course to test everything I was with 64-bit programs). I tried stress tests CPU, with testers of Intel. I removed my FI creative sound card and went with the on-board audio device. I started from scratch with a new install of Win 7 Ultimate OS, not only an upgrade. I have a great cooling and have checked system time, fans, power output etc. Does not overheat as I can see. Device Manager is clean and not yellow bangs or ratings. None of the above test produced errors.

  System Stats:

  Name of the operating system Microsoft Windows 7 Ultimate

  Version 6.1.7601 Service Pack 1 Build 7601

  Another Description of 64-bit operating system

  Manufacturer of operating system Microsoft Corporation

  Name of the system

  System manufacturer Gigabyte Technology Co., Ltd.

  X58A-UD3R system model

  System Type x 64-based PC

  Processor Intel Core i7 950 @ 3.07 GHz 3060 Mhz, 4 Lossnay, 8 logical processors

  BIOS Version/Date award Software International, Inc. FF, 18/02/2011

  SMBIOS Version 2.4

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  Username

  The Rocky area times time

  Physical memory (RAM) installed 6,00 GB

  6,00 GB total physical memory

  4.11 GB available physical memory

  12.0 GB total virtual memory

  9.91 GB available virtual memory

  Page file space 6,00 GB

  Paging file C:\pagefile.sys

  Most of the mini dump errors is associated with ntoskrnl.exe

  ==================================================

  Dump file: 112913-26379 - 01.dmp

  Crash time: 29/11/2013-21:31:54

  Bug Check String:

  Bug check code: 0 x 00000101

  Parameter 1: 00000000'00000019

  Parameter 2: 00000000'00000000

  Parameter 3: fffff880'03313180

  Parameter 4: 00000000'00000006

  Caused by the pilot: volmgr.sys

  Caused by the address: volmgr.sys + 14d0

  Description of the file: the Volume Manager driver

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)

  CPU: x 64

  Plant address: ntoskrnl.exe + 75bc0

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\MiniDump\112913-26379-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 7601

  Size of the dump file: 291 032

  Dump of file time: 29/11/2013-21:33:41

  ==================================================

  Please let me know what other information you need to help me solve this problem.
  Thank you.

  Are you sure you have the correct and up-to-date chipset drivers? Do you run VM and if if you have noticed a relationship between them and the system crashes? I can't think of it as anything other than a driver problem. The only reason why VM I'm raising is that some parameters may cause blockages of the seemingly random system especially when it comes to virtualization settings from intel or activate USB 3.0 in a virtual environment.

• Get random BSOD crashes

  Hello.

  Recently I have beed getting random BSOD crashes and pc freezes.

  System specs are

  Motherboard: Asus A4M87TD/USB3

  CPU: Phenom II X 4 965 BE

  GPU: Gigabyte Radeon R9 270 X 2 GB

  RAM: Corsair Vengace 8 GB (2x4gb) 1600 CL9

  PSU: 500W

  I ran tests:

  Memtest: 2 pieces of RAM moved together, between banks for 12 hours - no error

  Memter: one piece of ram at a time in 4 different banks each for 7 hours - no error

  Stability test OCCT for 3 hours - no crash

  Prime95 test 1 hour - no crash

  GPU has beed tested in another PC and works without any problem

  Accidents seem random.

  PC can get a bsod while using an internet browser (opera and IE also) or during a game (Battlefield 4, Battlefield 3, games, F2P, Eveonline etc.).

  The system is clean installed yesterday with driveres up-to-date.

  Used Whocashed to try to locate the troublemaker of disorders, but without result.

  Hers the link to 3 the most recent dump files

  https://onedrive.live.com/redir?RESID=DFB27DBEF4C25712! 1813 & authkey =! ABusdbioU9G1Vvs&ithint=file%2c.zip

  Any help would be appreciated.

  There is certainly no problem of software here, I'll tell you that much. This very much looks like failing RAM currently, or the motherboard as you said.

  How do you use your RAM via the BIOS? I * do * it passes Memtest, but it can still be misconfigured. I reset the CMOS for testing purposes and leave everything to default settings, not to touch even the DRAM timings. Leave for what she restores.

  Kind regards

  Patrick

• IdeaPad 500 connected to TV - now the screen is blank

  Hello - we have a 500-15ACZ Lenovo Ideapad laptop. My son connected the laptop to a TV with an HDMI cable. The TV and the computer screen showed the same thing.

  It has disconnected and closed the laptop screen to carry it out in another room. When he opened this back to the top of the computer screen was empty. He tried to restart/reboot the laptop, but it is still a blank screen. Is there a combo Fn + key that modifies the display? I can't find documentation on it anywhere...

  The power light is on and you hear the operation of the hard drive - we can see anything. Can someone tell me what Miss them us? I'm sure it's something easy... Thanks in advance.

  Processor: AMD A10 - 8700P processor (AMD A10 - 8700P): memory: 8 GB 1600 DDR3L: operating system: Windows 10 family 64(EN:English): hard drive: 1 TB 5400: optical drive: recordable DVD: Wireless: Bluetooth Version 4.0; Lenovo Wireless AC: camera: camera HD 720 p: monitor: 15.6 1920 x 1080:

  Thanks, CyberSimian, for your response - which has not been around.

  We went back to the TV. Turn off the laptop, plugged into the TV and started. BOTH screens were display. We have unplugged the TV and the computer screen remained.

  STRANGE. But works again!

• [SOLVED] IdeaPad 500 - problem of re - install Windows 10

  Hello

  After that I bought the Ideapad s 500 with Windows pre-installed, a Linux OS has been installed. Now, I want to change again for Windows 10.

  I made a bootable (with Linux) USB, changed the BIOS to EUFI settings and tried to start. It gives me 2 options; Drive HARD and the USB after reboot. But it will not boot from USB... If I lcik on this subject, the screen flickers and returns to the same position.

  When I did the USB bootable, I noticed that the name has changed.

  Any suggestions?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I used the windows create the media tool and everything worked.

• Constant BSOD/crash on Windows 8

  Hi I just did a clean install of windows 8 pro last week. Since then, I have had several accidents. It is random when it happens, sometimes it will happen as soon as I start, sometimes a few hours later. I tried to find me a solution, but were unsuccessful. So now, I hope that someone here may be able to help me. I am blue screen reader, and every time it crashes it is because of ntoskrnl.exe any help would be greatly appreciated. I am also attaching a SkyDrive link with all the files of dump C:\Windows\Minidump.

  Minidump link: http://sdrv.ms/125t7Ga

  Thanks in advance,

  Dennis

  DJH

  It's all related material.  There is a small chance that your Kaspersky remains may be the cause so I remove it and using Mse instead

  Kaspersky is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

  http://support.Kaspersky.com/downloads/utils/kavremover10.zip
  http://www.Microsoft.com/security_essentials/

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Windows BSOD Crash 10 during the signature version 7.24

  Hey guys,.

  I'm having the issue of Skype crashing point reset the computer every time I open a session. I have a few delicious diagnostics for you. If you have an idea of what is the cause and how to fix it would be super awesome!

  Thank you

  B

  https://community.Skype.com/T5/Windows-desktop-client/Skype-freezes-my-computer-completely-every-Tim...

• BSOD crash to the device USB unplug - Satellite A100

  Hello world

  On my new Toshiba Satellite A100 laptop right out of the box (pre-installed Windows XP MCE), I installed a USB device (a Line 6 POD XT live guitar amp modeling unit). I used the latest drivers available. The instrument is duly recognized and properly installed. I can use it properly.

  Only when I unplug it, or simply turn off... bang! blue screen crash. There is no icon 'Remove hardware safely' available, since it is not a unit of storage memory. Also, it used to work just fine (plug/unplug) on my previous laptop satellite I just replaced.
  Something with media center edition?

  Thanks in advance for your messages.
  Please help me!

  Hello

  Don t think that it s something wrong with MCE, but you know; nothing is impossible.
  The blue screen of death appears mainly due to hardware failure or serious software compatibility issues.

  Try to update the BIOS. Maybe that changes anything.
  Alternatively, you can try to disable the function of the USB ports to save energy. You can do this in the properties of the USB port

  Additional I would recommend contacting the manufacturing of USB device support.
  Maybe these disorders are known for guys

• Qosmio X 500 - 10U crashes without reason

  Before starting to explain the problem, some information on my laptop:

  Purchase date: 12/2009
  CPU: i7 Q720
  Memory: 8 GB: 2 x 4 GB (expand after purchase)
  Hard drive: 1 TB (expand after purchase)
  Graphics card: Nvidia Geforce GTS 250 M
  Operating system: Windows 8.1 company

  For 6 weeks, I have the problem, my laptop crashes without reason.
  It hangs only in the browser (checked with chrome, firefox and internet explorer, always the same).
  It crashes on sites with content video (youtube in particular, not quickly, but if I open multiple tabs with videos) and if I opened several tabs another.
  It weighs between 1-5 hours after using the browser (flash player is on the latest version).

  I do a forced departure to use the laptop again.
  It does not crash if I play games, convert videos, etc.
  Then things that highlight the laptop more surfing on the internet!

  While it crashes, I can move the mouse, but cannot open anything.
  If I look in the Task Manager, I see that CPU and memory work, but the use of the hard drive is 100% and it remains at this value, all the time.

  Although the drive hard ist at 100%, all the processes under it have 0%. I can't see it, if a program is the cause. The temperature of the CPU (40-60 ° C) and hard drive (35-38 ° C) is OK.

  So I read about the values of SMART with two different programs:
  [HD Tune Pro | http://www.directupload.net/file/d/3563/xorgtm8z_jpg.htm] and [GSmartControl | http://www.directupload.net/file/d/3563/ce54l6jq_jpg.htm]

  The values on the Calibration Retry Count, sector number reallocated, which are marked with warning and pre-defaillance if criticism which can cause a hard disk crash?

  The hard drive may be the problem?
  I've still warranty on this subject. Should I contact Samsung and send it?
  That would bring something?

  I think about to replace the hard drive with the samsung 840 Evo SSD, but if the hard drive is not the problem, I would have spent money for nothing

  What I checked again:
  -format and re-install: same question
  -check the memory with memtest86 + 6 hours: impeccable and no crashes during this time!
  -checked for viruses with avast at startup (with recovery CD): impeccable and always the same question
  -replace a MEMORY: same question
  -clean the old thermal grease and renew: temperatures decline a bit, but same problem

  I think that the problem is caused by the hard drive, but I'm not sure.
  What do you think?

  What can be the reason for my problem?
  I would be grateful all the lawyer.

  Post edited by: mehkay

  > It crashes only in the browser
  > It crashes on sites with content video (youtube in particular, not quickly, but if I open multiple tabs with videos) and if I opened several tabs another.

  Maybe there are some conflicts between modules installed in browser. How about you, the security settings of the firewall or antivirus? Check if temporal deactivation could improve navigation on the internet?

  If you think that the problem comes from the HARD drive, I would recommend you replace it with an SSD. I did it in my book even if the HARD drive was OK. I replaced the HARD drive with an SSD and the improvement of the performance is really great!

  By the way: I now use the HARD drive as external 2.5 USB enclosure HARD disk. It's quite good for backups and other stuff.

• Press does not not on Ideapad 500-15

  Hi people

  I have a brand new 500-15 i use in recent weeks.

  Today, the touchpad has stopped working. An external mouse works fine, but nothing on the touch pad. I rebooted as well - but it did not help.

  Can anyone suggest what can be done?

  (I actually get disappointed with this high-end laptop... I had problems of graphic drivers as well, that I had to bring myself)

  Hello

  Yes, it's the 500-15ISK

  I really did not solve it, but after trying to update the drivers manually by using what has been on the Lenovo site, then fron Synaptics site - I finally solved this problem to roll back the driver and then auto-updated drivers, and then she returned to the lif

• Uşaklar and again Atikmpag.sys bsod crash after and after and after

  It all started in a Sun and a nice day I turned my G62-b13ST and after some time it crashed and I googled and I saw that the driver Sweeper and downloading might be a solution I thought. After I've deleted and updated the driver, he arrived after and after and this situation atikmpag.sys and finally ended up here im desperate and hopeless.

  I tried the solutions in the internet and ask you what to do?

  Hi DEVO61,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G62-b13ST and constant crashing. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore.

  Here is a link to a Update for the BIOS. If this does not help, try tapping F10 key go to the diagnosis and then run the hard drive & memory test when a test fails, you will need to replace the part. Please also check if the device is more heating.

  Please let me know how it goes.

  Thank you.

• LaserJet Pro 200 color MFP M276nw PC with BSOD crashes

  Printer connected to Windows 7 64-bit PC via a USB cable.  As soon as the last leaves page the printer after printing the PC hangs on a blue screen with corresponding memory dump.  Printer is new purchase and I was reluctant to go for a printer processing class from the off, but it was at a price (with cash) that I just couldn't ignore with more features that I even wanted to.  Something has to give, and in this case, it seems that it is the software of printer driver? (Semi-supposition). This is obviously a problem that needs to be resolved immediately that I'm strongly tempted to return to the store for a full refund and put it in reverse (dare I say here... an OKI machine?).  Another reason that I bought the thing was my first laser a Laserjet III who served me perfectly for 20 years!  But then even HP is only quality far then and it cost about £2 500!  Restore this confidence in HP products and support to let me know a solution simple and quick as soon as possible because I really want to take it back... and I hate to leave negative comments!  Thanks in advance!

  Hello

  If the printer is connected to a USB 3.0 on your computer, try to connect to a USB 2.0 port and check for the difference.

  So try following the directions below and check if this can help:

  http://support.HP.com/us-en/document/c03477088

  Shlomi

• BSOD Crashes happening often, help me out here?

  Here's my crash report, ideas would be great. Happening for most everything using Ableton Live 9 Suite or FL Studio 11, two workstations digital audio.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1
  BCP1: 0000000073502E09
  BCP2: 0000000000000000
  BCP3: 000000000000FFFF
  BCP4: FFFFF8800D69ACA0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Thank you.

  LEAPC_INDEX_MISMATCHERREUR (1)

  This indicates that there is an inconsistency in the index of State APC.

  This checking bug without a compatible kernel VRF image can be rather difficult to debug, because there is not much to debug.

  2: kd > k
  Call child-SP RetAddr site
  fffff880'0cc8da68 fffff800'030 d 0169 nt! KeBugCheckEx
  fffff880 '0cc8da70 fffff800' 030d00a0 nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0cc8dbb0 00000000' 74152e09 nt! KiSystemServiceExit + 0 x 245
  00000000' 0601f0f8 00000000'00000000 0x74152e09

  We simply output of system service calls, and then the bug control is called.

  Nom_processus: FL.exe

  Process of the FL Studio at the time of the accident. A 3rd driver may be the cause of conflicts with the DAW.

  DRIVER_POWER_STATE_FAILURE (9f)

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  9F error checking, {3, fffffa8007b06060, fffff80000b9c518, fffffa800760a750}

  0: kd >! fffffa800760a750 of the IORP
  > [16, 2] fffffa8006e28050 0 0 00000000 00000000 - 00000000
  Failed to load image \SystemRoot\system32\DRIVERS\NETw5s64.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for NETw5s64.sys
  ERROR: Module load completed but symbols can be loaded for NETw5s64.sys
  \Driver\NETw5s64

  NETw5s64.sys is the pilot who has blocked the PRI for too long, which is the Intel 5100 wifi driver.

  0: kd > lmvm NETw5s64
  start end module name
  fffff880 '05685000 fffff880' 05d 32000 T NETw5s64 (no symbol)
  Loaded symbol image file: NETw5s64.sys
  Image path: \SystemRoot\system32\DRIVERS\NETw5s64.sys
  Image name: NETw5s64.sys
  Timestamp: Kills Sep 15 15:40:39 2009

  It is very ancient, dating from 2009. Update ASAP - http://www.dell.com/support/home/us/en/19/Products/?app=drivers

  --------------------------------------

  2: kd > lmvm VSTwindrvr6
  start end module name
  fffff880 '05f5a000 fffff880' 05f9d000 VSTwindrvr6 (postponed)
  Image path: \SystemRoot\system32\drivers\VSTwindrvr6.sys
  Image name: VSTwindrvr6.sys
  Timestamp: Fri Jul 04 03:28:01 2008 (486DD101)

  I saw this Jungo driver cause a lot of problems in the past, because it is very old. If accidents occur after updating the driver wifi, I will say that it is the culprit and I would like to uninstall the software and remove the device (if any) for troubleshooting purposes.

  Kind regards

  Patrick