identification of the ports series

Similar Questions

• WIN8 USB to connect to the port series

  I have a very old series equipment which I want to connect to Win8.  When I connect the device using my USB to Serial Port adapter, I don't wear any new material relative to the "conclusion" message  There seems to be a USB Serial Port driver is already loaded, but when I start my app, it says that it is impossible to open the port.  The adapter I use States it goes only until to Win7.  Do I need a newer Win8 adapter?

  Perhaps. If you go into the device under Ports Manager, it shows the new COM port? It can assign COM5, COM6 (or superior).

• remove the ports series and parallel

  Hello

  I wonder what that "sport erial and parallel can then be removed" in all these articles on the new vSphere 6 functions is all about. I couldn't remove these VMs ports before, couldn't I? Nobody seems to get into the details, everyone just copies / repeat the same thing on the other.

  Best regards

  Jan

  Versions previous hardware could always hardware ports series and parallel within the virtual of the motherboard SuperIO chip, even when there are no virtual serial ports or virtual parallel ports configured for the virtual machine - quietly ports would be "present but disconnected", so they would use more space i/o and IRQ, and always appear to be present in the list of devices in your guest OS IRQ and I/O port map.

  With the latest version of the material, if you delete the port virtual series and virtual parallel port, they will be missing... the guest OS won't see all the device, and it consumes no space port of IO and no IRQ.

  I hope this helps!

  --

  Darius

• connecting to the port Series 9 pins

  I have Vista Business. I use a scanner that uses a serial connection. He has always worked in XP and I couldn't use hyoperterminal 0 test the. Now, there is no test for the port. I can't get the data via the port and I'm not familiar with telnet or knowledge if we can test the port. My port may be blocked? I truned disable the firewall and no luck. I place the receiver program as a program exception in the firewall, but the digitizer is what sends the data to the port not the software on the system.

  Any ideas?

  Hello Frank Gregg,.

  ·         The digitizer is displayed in Device Manager when you connect?

  ·         You have the drivers installed for the scanner?

  ·         Who is the manufacturer of your scanner?

  ·         What exactly are you using the digitizer for?

  ·         What is the name of the program that you use to perform the test?

  I suggest you contact the manufacturer for the digitizer get the drivers to connect with Vista.

  If the device shows working in Device Manager then you can try to perform the test for the ports.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Connection connection to the port series of comments on the application, the host

  I'm working on a project using Workstation 7.1.3 build-324285.  The application is a system running Windows XP as a guest.  The application has a CLI (Command Line Interface) hardcoded to use COM1.  I can reach COM1 by attaching a USB to adapter series and connection to the host and using a form of closure and an another USB adapter to series return to the homepage or another machine, where a terminal like PuTTY program is used to configure the embedded system.  However, I would use something like a named pipe to connect directly from Putty to Com 1 in the prompt without leaving a real interface series.  Is this possible?

  I created a serial port in the settings menu of the virtual machine and which mapped to a channel named (//./pipe/com_1) and which can reach in Putty, but of course this works if the guest OS is in debugging and is not my app on COM1.

  Thank you for your ideas and experiences!

  Thank you

  James

  First, you must remove the prompt thinprint - it uses COM1 if it is active.
  See my notes here
  http://sanbarrow.com/VMX/VMX-serial-ports.html

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• Error reading the port series when the hexadecimal value is 0d (carriage return)

  Hello

  I'm reading a string of 80 bytes from the serial port, but if one of these bytes is 0d (hexa) the rest of the bytes are not read because the read node Visa sees the value 0D as ASCII for the return shipping. How can I read the entire string and see the 0d as a value and not as a symbol of the ASCII?

  Manual

  Of course, she sees it as a carriage return and ends. That's what you have programmed to do. The "character of endpoint allows" set to false with your VISA to set up the Serial Port. What Steve has already said. Claire?

• How the binary structure of unbundling that runs through the port series

  Hi all

  I have a Board that transmits a binary stream. This flow is that a structure repeated constantly... the payload of this structure looks like this

  I have no problem to read the serial port and disaplying of ASCII data, but this isn't my request.

  ANALOG_COUNT is (2)

  typedef struct

  {

  uint16_t light;
  float TempAmbient;
  float TempTarget;
  CDA uint16_t [ANALOG_COUNT];
  int16_t AccX;
  int16_t AccY;
  int16_t AccZ;

  } StreamContext_t

  The idea is for me, once I get the 20 bytes that make up the strcture that I want to brake into its parts to feed it graphs or what ever.

  Thank you

  Alejandro

  
  

• Event gateway to communicate with the ports series

  I'm not so familiar with event gateways so sorry if I ask a question wrong. Can we use event gateways to communicate with the serial ports? Thank you.

  Can we use event gateways to communicate with the serial ports?
  N ° at least, not directly. Serial ports are physical, material, while ports dealing with event gateways are virtual, software.

  The event gateway is simply the code that listens to events in a Coldfusion application. He then responds accordingly. For example, the event Socket gateway is the code that listens on a TCP - IP port, then sends or receives messages via TCP - IP protocol.

• SD Bluetooth 2 and not able to connect to the port series on pocket PC

  Software Bluetooth version 4.01 OS Pocketpc 2002

  Everything works well, you can see the discovered device, but the status is ´not connected´ from the following Web page, it is possible to connect; http://www.TomTom.com/support/index.PHP?language=5&query=Toshiba&FID=334

  but this option is not available, no idea how to get connected GPS!

  Dnloaded and tried version 1.0, but the sd card is not valid

  Thank you very much.

  Hello

  What Toshiba PocketPc do you have?

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Termination of the VI after 20 seconds of acceptance of values from a port series, transmitting continuous data.

  Hello

  I use a data acquisition unit integrated in a unit of 2 balls of hair, installed with a Zilla controller on an electric vehicle. Hairballs allows other devices to the device via a serial RS-232 port. The option of data acquisition for displays information like speed, tension etc.

  I use Teraterm, a terminal Communicator to start communication with the device of hairballs. After having sailed in the various menus, I can access the DAQ feature that provides data continuously to the status of the various components of the vehicle. 5B 01 0b C8 03 53 02 39 27 OMFS is, for example, a sample of data from the module of data acquisition.

  When the port is configured to send these data, I close the program Teraterm and run the vi in LabVIEW (series of reading and writing to .tdms only.vi) which stop automatically in 25 seconds (so recording 25 readings). It gives an error (-1073807252) saying that VISA: (Hex 0xBFFF006C) an overrun error occurred during the transfer. A character not read in the material before the arrival of the next character.

  I'm unable to change the output of the device of data acquisition. In fact, the DAQ hardware has no controls what so ever. Thus, all the necessary adjustments must be made in LabVIEW.

  Is there a solution to this problem? What could be the likely causes?

  Thank you for your help in advance.

  Best regards

  Akhil Kumar mountain (M.)

  Year 4 | Undergraduate | Mechanical engineering

  National University of Singapore

  E-mail: [email protected]

  Mobile: (+ 65) 9326 7069

  Hi Akhil,

  I would be really grateful if you type my username properly - should not be so difficult to copy & paste the 5 letters

  "So you are saying that if I increase the rate at which I accepted data, (for example every 500ms) the problem should disappear.

  Yes. Read the more often you less likely buffer, you will get a buffer overrun...

  "There when even to"Refresh"the buffer after each reading taken? ... How can you increase the buffer? »

  Did you look at the advanced features in the VISA-> 'VISA'-> ' / unique Bus Interface "palette? It's all in your face

  "Also a faster computer to run the program would help?

  Certainly NO! These days, any computer is fast enough to handle standard RS232 serial communication...

• NOR 9862% 1 Port 2FFD NI - XNET high-speed CAN Module of the C series

  I'll try to find the resourse on the NOR-9862 which explains the lights on the front of the ideas?

  I know that the green lights light up when there is communication that I am able to communicate with a C-18 cat on J-1939 very well with the LabVIEW program that I have.

  What I don't know, it's what the red light. and no matter which of the two lights can come?

  When executing my LabVIEW program (2015) with a cRIO-9023 (in hybrid) via X-Net platform; map 9862 passed suddenly double green at a red light. The CAT engine cut off, but I'm not sure if the can loss was the cause or the effect of the shuttdown. Now for some reason any I lost all J-1939 - communtication CAT.

  I've been searched ni.com and have not yet found an answer to my question prliminary (first one above).

  Anyone know where they could direct me to find this info?

  Gearmiester,

  I was able to find information about the LEDs XNET Hardware and software manual. The LEDs are covered on pages 63-65. If my interpretation is correct, it looks like you have a solid red LED 1. This indicates that there is a problem with the bus power. Make sure your bus is powered correctly, as the manual indicates that this indicates an open session but a problem with the power supply on the port.

• Visa read write on port series independently and at the same time!

  Hi all!

  I need to read and write data to and from a serial port (rs232) independently and simultaneously .

  I'm sorry that I can not put a picture of that, but it's very simple:
  

  I used "set up the serial port" and forwarded to two while loops, the resource reference.

  a loop is reading data and the other loop is writing data to the port.

  the problem is when the playback loop (function serial reading) waiting for data - it blocks the other loop to run (writing of the serial function is blocked).

  I searched the forum and find this visa open function has 'duplicate session' option - that's what I need?

  If true, can someone explain exactly how to wire and use it in the right direction?

  Thank you very much.

  Guy.

  OK, I found an example that solved my problem: a VI called   serialduplicatesessions.

  The file is associated.

  Here is the link for all cases: http://zone.ni.com/devzone/cda/epd/p/id/1727