IMAQ usb-> black screen camera

Similar Questions

• I restarted my computer and then it no longer turns. The windows screen and then a black screen came up with a white line that flashes at the top left.

  I had tabs open, and he said that he would not allow restart, but still, I pressed ok and now nothing shows that this black screen.

  Hi Alegreen,

  ·         You receive an error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: If the method above does not help, then you can refer the article and check mentioned below.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps.

• Windows 8.1, black screen with cursor flashing before logon

  I tried to update my sound driver, then all of a sudden a greyish black screen came on screen with the blinking cursor.
  I waited, but nothing happened so I took the laptop battery and replace.
  the laptop starts in safe mode, but if I run it normally, a black screen with flashing cursor, the widowed startup sound also plays. Help, please
  My laptop is Hp pavilion 15

  HP Pavilion e053se-15 Notebook PC (ENERGY STAR) (E0Y27EA)

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5442752

  You log in safe mode and remove the driver that you have installed. Then, restart your laptop. And reinstall the previous versions of the sound card.
  Good luck!

  (Previously, I also met this case with my friend ' notebook: Probook s 4530)

• HP DV6 ENVY: Envy HP dv6 black screen that turned while WE

  I am very grateful for HP, that my cell phone ran very smooth for about 3 years, a few months after Windows 8 is out, and Christmas was coming right here. But after these good times, something strange happened on my laptop exactly at the beginning of April (wow exactly to April Fools Day and Yes this laptop trying to DECEIVE me I think, lol)...

  I'm used to update my computer so I could keep my computer running well as much as possible. The last update, I've done was updated my graphics card: Intel HD Graphics 4000. Unfortunately, there were errors in the update of the map, so I've manually updated, and it succeeded. Now the computer tells me to restart the PC, so I did.

  Now, something strange happened, he went through the process of restarting my laptop, after HP logo with the circle to move below the logo appeared, and after a black screen came through my eyes. Generally, it should be just 10 seconds so that it appears on the screen of Windows 8 and the login for the account, but that's happened. The black screen was 5 minutes, 10 minutes, still, waited 15 minutes and even 30 minutes! I was wondering what happens after upgrading my graphics card.

  If someone help me? Thank you!

  With legitimate answers correct?

  Oh yes my laptop specs:

  Intel Core i7 3630QM

  8 GB RAM

  Graphics Intel HD 4000

  NVIDIA Geforce 630 m 2 GB DDR3

  Resolution: 1920 X 1080

  Max of about 900 GB disk space

  Hi @sab-ero ,.

  Welcome to the HP support community! I hope you enjoy your experience with us.

  I see that you get a black screen after the upgrade of your Intel graphics driver. If the screen remains black our troubleshooting options are limited. Try to do a Hard Reset to see if a clean reboot gets it going. Keys Num or CAPS LOCK flashes at all? If so, how many times? If you are connecting to an external monitor, are you able to see anything?

• Black screen after the user logon in Windows 7

  Hello
  I use Windows 7 ultimate x 64 on my desktop. Recently, I just turned on my PC and when I tried to connect to my account after the Welcome screen, a black screen came up with the cursor and nothing else has been demonstrated. He just hung there.
  There is another account in which I can start but it freezes and does not respond. I can boot into safe mode but no icons, programs do not start which is pinned to the taskbar and I must run firefox.exe via the Task Manager... System Restore does nothing. I do not have the disc to install windows 7. All other patches? Please say.

  Also, the black screen goes after 40 minutes or more and I'm able to use my pc.

  Help, please.
  Thank you.

  Hello

  It looks like certainly there is some sort of virus on the computer. If this is the case, your files will not be deleted but they could have been hidden. So, please run a full scan the system for viruses.

  
  Method 1: Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

   

  Method 2: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

   

   

  I hope this information helps you!

  Thanks for trying to help me but I used Unhide.exe available on the website of Brian and my files are back.

  Thanks Brian. : D

• Re: PX1256E-1TVH hybrid USB TV Tuner - see black screen only

  HY guys,.

  I bought this USB to watch a free analog channel on my laptop.
  I installed correctly the savvy TV software; I get the channels and he finds more than 300 free TV progs.
  But when I look I see black screen and there is no sound for all channels.

  I tried in another laptop and it works correctly, I do not understand why.
  I installed all the codecs needed.

  Hello

  You use laptop LCD only or one external monitor too?

• Satellite A300-15 has - black screen preview using the builtin camera

  I just bought a new computer laptop Toshiba Satellite, but built in camera is not working well.
  Whenever I open the camera assistant software, it shows me a black preview, but when I take a snapshot he takes the picture...

  I tried with msn and Skype, but it shows the black screen.
  I searched Toshiba forums and all the troubleshooting guides and impossible to find a solution to my problem.

  Help, please?

  Try to reinstall the webcam software.
  This should help you.

  Latest software for webcam can be downloaded from the page of European driver of Toshiba.

  Then remove the preinstalled software, restart the laptop and install the downloaded software.

  Good luck

• the 5s iPhone camera is still stuck in black screen after upgrading to iOS 9.2 still frozen just like with iOS 9.1

  I updated my iphone to iOS 9.1 5s, but the camera does not work, most of the time that it was stuck on the black screen. I read in a forum as there are a lot of users affected by the present. "Waited for the iOS 9.2, hoping that it will fix the bug. Finally iOS 9.2 has been launched. Happy to download it thinking that it is the answer to the question of the camera. For a while camera works perfectly, but after 2 days, it was stuck at the black screen forever. It worsen the problem of camera. Hoping someone can help me to fix my phone's camera. Thank you in advance.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• back camera stops working... black screen

  I had my compact z3 since February of this year and up to about 3 weeks ago its been very well. Now the rear camera has stopped working and just show a black screen and sort of gel. its driving me crackers! I cleared the cache of the camera. use the factory reset tricks and used the CCP with the engine update with no joy.

  Hi @DanStar,

  As @Nabeel says, it would be preferable if you contact your Local support for your phone under review as soon as possible to one of our authorized service centers.

• After a black screen with a cursor, the performed system restore, now cannot open programs, USB drive

  Original title: Windows 7 Home Edition

  Yesterday, my pc only has a black screen with a cursor. I tried to restore on another point but then after starting upwards and put my password, I get the home screen but cannot open any programs. I can't use the USB stick or cd / dvd drive so how should proceed to solve this? I can't put my external modem to make a back up and I really want to fix this without losing all the data on my pc. I can run programs in safe mode and windows installation disc opens in SafeMode as well, however I can't set safe mode.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Start-up and installation of Windows 8 USB result in a black screen, followed by a blue screen.

  Hello.

  I help my friend who has a problem with his computer running Windows 8. It started with his computer, gel and should it reboot.
  After the restart, he is greeted by a black screen for about 30 minutes, followed of a BSOD flashin (the smiley one). No error code.

  I made a bootable USB key with Windows 8 on it, downloaded from the Microsoft Web site. After the start of it, I am presented by Windows 8 logo, a circle of rotation, but then it goes black and after 5 to 30 minutes I am getting the same BSOD.

  I tried to disable all I can in the BIOS. The BIOS detects all hardware in the computer.

  The computer is a portable computer. ASUS X401a.

  I hope someone out there has an answer for me!

  Thank you.
  / Carl.

  Carl

  The first thing I would do is to try to boot from the victory 8 dvd.  (if you don't have it get a).  If your problem of computers is what associated USB then start on a USB key will cause a BSOD.

  If this does not help in pulling the HD to put in an envelope and try another computer can help if this does not work on the other computer it can point to the HD as the question.

  I would also try vi USB boot using win PE (Google for download site)

  IF all of the above do not help it is time to bring it to a professional or to the room if it is under warranty

• (Redirected) USB Flash Drive Boot (BiOS) - black screen/freeze/without end of loading - need help!

  Hello community Dell:

  I have been using your Inspiron desktop for work. Work requires me to a startup USB flash drive every morning to access work files and programs. I just press F12 and select the USB flash drive that brings me then in a workplace Ubuntu after entering my credentials - very easy.

  I recently bought the X 51 office because I wanted the game after work and it was intended to replace the Inspiron.

  X 51 issues (boot BiOS - secure boot off as with the Inspiron):

  UEFI = I get a black screen after the "loading...". ', it freezes the whole system

  Legacy = told me to restart the system and drive and the message repeats little matter what you press

  I tried USB different slots, ending different to access USB - nothing works!

  I tested another theory that would disable the GPU of the X 51, but this proved futile because the problems themselves was replicated. The GPU is the only unique component between two desktop computers. CPU is i3, i5 vs, vs 4g 8g, 1 TB vs. 2 TB, so I do not see these improvements of specification being the culprit. The X 51 has a different unique Alienware BiOS interface.

  The X 51 will be returned to Dell unless someone can some up with a solution - I would be eternally grateful, thank you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Pavilion G6 1332el: black screen after installing drivers

  I installed Windows Home Premium x 64 on my HP Pavilion G6 1332el and everithing was very good.

  Downloaded all the drivers for this operating system on the HP Download Page and install them all. I never reboot after each driver installed, so I can not tell you witch cause car my problem.

  After all, I did a normal Shut Down.

  When I powered THE next day, after Windows Logo disapier, only black screen remains.

  I tried VGA output, but my laptop keyboard faield and I FN key on my USB keyboard.

  I'm here, can I di to solve my problem?

  Thank you!

  apashi

  I'm guessing that you have reinstalled Windows from a DVD, right?

  Your PC came with a version of HP OEM of Windows preinstalled, and it is the only version guaranteed to work on this unit.

  You should consider reinstalling using HP recovery media to operate again.  It's a set of DVD and a CD that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Pavilion dv6000: black screen after getting a virus and reboot

  I got a virus and after that I restarted my computer it gets to a black screen. No cursor, not even the HP logo flashes on the screen and more.

  I created bootable usb and dvd discs and tried to start with them and neither one of them work. Also, I can not for the installation or the bios.

  I don't have any other ideas for what to do. Any help is appreciated.

  Hello @sepi,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the black screen problem and he wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, you may need to perform a system restore, to put the computer laptop back to the factory setting.  First of all, try to review the following document and let me know how it goes:

  Computers laptops HP - computer won't start (Windows 7, Vista, XP)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!