IMovie 09 guard stop unexpectedly

Whenever I have open iMovie to edit my videos, it will automatically exit by itself

If you use El Capitan, you have probably run into an incompatibility with iMovie 9. There are incompatibilities with iMovie 9 and El Capitan, played out in different ways compared to the display of photos, clips, etc. If you use try Yosemite or Mavericks removing iMovie preferences. You can also try to create a new admin user and see if iMovie is behaving for this user.

Tags: iLife

Similar Questions

FCPX guard leave unexpectedly after I do the same edit

FCPX started just suddenly stop unexpectedly, often after a few changes, and the last time he is smoking after that I have try to do the same thing to change. Any ideas? I have the version 10.2.3, on El Captain 10.11.4

Really hard to say where I'm sitting. FCPX accidents are often related to bad media. Maybe in the case, I have a feeling they are trying to use too many PDF files in a library, but this isn't what I can prove it.

Open a backup copy of your project, from before your sequence crashing and see if it crashes. After the return. fans will have more questions for you. Patience.

By the end of 2012 (27 in.) (i5) iMac - guard stop!

By the end of 2012 (27 in.) (i5) iMac - guard stop!

For the last three weeks, I experience my iMac closing for no apparent reason.

First of all I have if it were simply a fuse I replaced.

The problem became more occurrent last week.

I have same low leveled for Mountain Lion to see if maybe it was the operating system or software related, but it's the same thing.

I have since reinstalled El Capitan of a clean install, and the problem still persists.
There's time were the computer remains on most long and times when it will start only insofar as the login screen and then stop.

Please could someone help me shed light on this very frustrating issue... And the thing is, this computer is very rarely used since the purchase.

See you soon!

Firebrand

A new installation should take software out of the picture. You run Apple Hardware Test

Apple Hardware Test:

https://support.Apple.com/en-us/HT201257

It is not very reliable to find errors, but if it reports an error, it may be useful.

Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts. I followed the steps and was able to remove the trouble messages. Now I can't restore the mail window message viewer component.

Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts. I followed the steps and was able to remove the trouble messages. Now I can't restore the mail window message viewer component. When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved. Can open the message by double clicking a message viewer.

Hi there, alicefrompa!

Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left. When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

From there, you should be able to adjust the boxes to your widths you want as expected.

If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.
1. Press command + O on your keyboard.
2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.
See you soon!

AC100 - the process android.process.acore has stopped unexpectedly

Our AC100 suffers from frequent and annoying messages: the process android.process.acore has stopped unexpectedly (well it is said in Dutch, so I hope that the translation is good). After googeling I found many people with the same problems (but for other devices as a computer of Toshiba), and it seems that the only solution is to reset the original settings (after having a back-up).

But since everything downloaded widgets and applications will be gone then, I'm looking for another option. Does anyone have any experience with this message? How you solve the problem?

And who knows how starts this problems?

Hello

I also recommend the return parameter of the Android to the factory settings. The widget could be saved on external source before setting the notebook to factory settings.

I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

Hi Happyrockgeek,

Welcome to Microsoft Windows 7 answers Forum!

This problem occurs if the Windows security .dll files are incorrectly registered.

To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
Method 1:
Run (Checksur.exe) system update readiness tool.
To do this, follow these steps:
1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/default.aspx/KB/947821
2. try to install the updates again.

Methods 2.
Reset the Windows Update components.
1. to reset the Windows Update components automatically, click the fix button in the link below.
http://support.Microsoft.com/kb/971058
2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

I also suggest you to install the latest version of Windows Installer 4.5.
Follow the link below to download:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
and you can also try to install after you turn off the firewall.

It will be useful.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum.

com Motorola.service.main stopped unexpectedly - loop

My Atrix has the last applied update and started recently showing the following error message:

"com.motorola.service.main stopped unexpectedly".

Ok button returns to the screen for 1 second and the error reappears. This makes the phone unusable.

I did a factory reset and the error was absent for 24 hours, but now it has reappeared.

Any thoughts on how I might be able to solve this problem?

David

I am not sure what the problem was, but here's how I fixed it:

-Backup if possible

-Reset

-Create a new account of blur with another email address

I suspect it's something blur associated account.

I hope this helps.

Windows XP stops unexpectedly

My laptop stops unexpectedly, generally during the night when it has not been used for a long time. I suspect a heat problem, but after taking measures to keep as cool as possible, it remains off. I use Avast! and have run Spybot-Search & Destroy, and Malware Bytes in order to detect and eliminate viruses. I am running XP Pro SP3. What does my laptop stop? And what I can do to remove this action?

We can look in your event log viewer to see the cause.

Please provide us with your administrative Event Viewer logs by following these steps:

Click on Start Menu
Type eventvwr in the find programs and files (do not hit enter)
Click with the right button on eventvwr.exe and click Run as administrator
Expand custom views
Click the administrative events
Right-click Administrative events
Record all events in custom view as...
Save them to a folder where you will remember which folder and save it as Errors.evtx
Go where you saved Errors.evtx
Make a right click Errors.evtx-> send to compressed (zipped) folder of->
Download the .zip to skydrive or a file sharing service file

After the automatic installation of Windows updates, laptop computer stops unexpectedly

After that I installed the automatic updates my laptop stops unexpectedly. No one knows why this happens?

Hello

· The updates have been installed on the computer?

· What is the service pack installed?

· You receive an error message or error code when the computer starts?

You can follow the link below and get the exact error message or error code: Windows XP restarts unexpectedly or restarts when you shut down the computer: http://support.microsoft.com/kb/320299

For reference: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

Unable to play counter strike 1.6 it shows HL Launcher has stopped unexpectedly

Original title: counter-strike 1.6

I am not able to play counter strike 1.6.

When I click the icon it shows HL Launcher has stopped unexpectedly.

show then 2 options:

(1) close the program

(2) verification of the solution online

Hi manank31,

Thanks for posting in the Microsoft Communities. The problem description, I understand that you are not able to play the game counter strike 1.6. Provide the following information:

·         Did you do changes on the computer before the show?

·         What is the full error message?

·         He has already worked?

·         Are you able to play games?

Follow these methods.

Method 1: Uninstall and reinstall the game.

Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

Method 3: Follow the steps in the article.

The problems of the game performance

Let us know if you need more assistance.

Thank you.

My computer guard stop and when I return the said "STOP: 0x0000007F.

I had my HP for 4 years and never a problem, then the other day, that he said that I needed a new activation key so I rebooted with the recovery disk and which corrects this problem, now my computer guard stop and when it restarts, it asks start in safe mode, or start windows normally the error message says STOP : 0x0000007F (0x00000000, 0 x 80503130, 0x00000000, 0x00000000) help please, I have no idea whats going on!

Hi Doc,

I suggest you to follow the steps and check if it helps.

Run the memory diagnostic tool and check if that helps.

http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

You can also check out the link below.
http://support.Microsoft.com/kb/137539
Note: This link is also applicable to Windows Vista.

My computer Guard stops running

My computer guard stop while usage - the screen empties and says offline, but the Tower remains on everything to freeze me. When she did this, I can not yet turned off the computer completely without closing the power bar (which I know is not good for the computer). It happens more and more frequently. My virus scans show nothing, but I'm afraid my computer/IP address is used by an outside source. What should I do?

Hi Jim,.

· You receive an error message when the screen goes black?

Method 1: Start in safe mode and check for the issue. Report of the results.

Method 2: Run the next Fixit tool to see if it helps.

Automatically diagnose and repair common security settings on Windows

Also, check Event Viewer for detailed information on the problem.

Open event viewer

What are the information in event logs? (Event Viewer)

Intel IMSM driver stops unexpectedly

Often my Lenovo - Vista stops. I get a message 'Intel - driver IMSM stop unexpectedly' and Ms. recommend a FIX (solution), I've now done 8 times - and this does not solve the problem? All ideas

Hi AlHamm,

Method 1
I suggest you perform the clean boot and remove the program that is causing the problem. The issue could be with Intel Matrix Storage Manager driver.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135

Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

Method 2
If the steps above fail, I suggest to uninstall and reinstall the program.

Uninstall or change a program
http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

PC Windows Vista stops unexpectedly. Sometimes several times a day and sometimes not at all.

My Windows Vista PC completely stops unexpectedly and without warning. Sometimes several times a day and sometimes not at all. When I turn it back on, sometimes I have a blue screen that tells me that the PC has experienced an unexpected shutdown and communicate with my local technician. However when turning on, I am always able to return to my office. My anti-virus support told me that it is not related to a virus. Help!

It is likely some equipment or device driver issue (although we can not entrierly a problem of software). I need a lot more information on this blue screen - EXACTLY what it says Word for Word with all the codes. Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death. They should help you solve your problem. http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7 I know it's long but a blue screen problems problem may take some time because there are so many different causes and we must find the right to try to identify the problem and then find a way to fix it. One of the elements in his post is a method to prevent the system to reboot when a blue screen if you have the time to copy the information. If the system is not turned off, but the screen does not stay up long, press prtscrn to copy the screen, then when the system boots to open Microsoft Paint, click on the Open box and click Ctrl + V to paste here you have plenty of time to copy the information and post it here so we can look at. Do not forget to include EVERYTHING - it is unclear what could be of crucial importance.

I repeat the procedures in the messages of the spirit in the link above - just follow them and answer back here with the results. Want to make interim reports before the end of the stteps is perfectly OK - in fact, I suggest you do that so I can help guide you and maybe eliminate some of the steps because they will provide no information, that we don't already know (or will not solve the problem because of the information that we already know.

A question, is your so hot PC anywhere on it that if you hold your hand on it, you will need to detach due to heat? Overheating is a common cause of this type of problem. Check that the fan doesn't work and all intake and exhaust ports are clean of dust, lint, or any other obstacle. If this is a desktop computer, remove the cover and clean the entire interior to remove dust and lint and anything else that doesn't belong. Make sure you do not loosen or detach the wiring or the accessories cards or RAM chips. Don't bother if it's a laptop - it's too difficult to get inside to do a proper clean-up - just make sure that the fan is running and that the vents are clear.

I hope this helps. I look forward to your reply with your comments about what you did to the spirit and procedures for detailed information on the blue screen error.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

stop unexpectedly

Help, please! I have a dell studio 1555 with vista Home premium x 64 os. my computer suddenly stops no apprent reason. the bios is the latest version and the service pack for vista has been installed. I ran to the verification of diagnosis of the hardware, and it did not clerical errors. I get the error message is:

Product

Windows

Problem

Stop unexpectedly

Date

02-25-2010 05:30

Status

Report sent

Signature of the problem

Files helping to describe the problem (some files may be is no longer available)

Additional information about the problem

BCCode: 9f

BCP1: 0000000000000003

BCP2: FFFFFA8007D319B0

BCP3: FFFFFA8007EC6080

BCP4: FFFFFA8009CA2BD0

OS version: 6_0_6002

Service Pack: 2_0

Product: 768_1

Information about the server: 6515259b-90a7-4b5d-9793-819fe0875511

Mini022510 - 01.dmp

SysData. XML

Version.txt

Problem event name: BlueScreen

The system version: 6.0.6002.2.2.0.768.3

Locale ID: 7177

Hello

This "might" be a power problem, even if it's not the most common cause.

9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
If a driver has been updated before this happen.

9f, means that a driver does not properly support the power state. Check in Control Panel - device
Manager to ensure that the drivers are not stop during sleep - double-click graphics card.
Card NETWORK and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off
power. Maybe the only has a problem. See below for troubleshooting and driver update methods.

Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
(and it might still be video interacts with something else).

===========================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

IMovie 09 guard stop unexpectedly

Similar Questions

Maybe you are looking for