Impossible to activate the complete resolution in the program monitor

Similar Questions

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Impossible to activate the DC AA after the end of the trial period. Chatted for an HOUR and she had windows setup error. Cat then "referred to as specialist ' and chat over on that date.

  I'm a little ANGRY. I have AA X that allows me to update and buy AA DC.  I bought DC AA after the trial period.  I was unable to activate the program.  Chatted with representative for 1 HOUR. She did just what I had done on several occasions to get Adobe Acrobat DC activated and failed. She did a good job that she finally got the Windows Installer error: "this installation package would not open. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. "Now there is no way to use even the DC AA naked without the tools. Any Suggestions?

  Hi amysuet1983 ,

  Please try the steps suggested in this KB article:- wrong 1635 on a fix when installing Acrobat 8 or Reader 8

  If the problem persists please check with the other user account with admin rights to reproduce the problem, check with this article:- Troubleshooting from Adobe: create an account to administrator in Windows

  Let me know how it goes.

  Kind regards

  Christian

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• Downloaded PSE13, these two files are located in the downloads folder, but I can't activate the program, he repeated to me that the part of the file is missing

  Downloaded PSE13, these two files are located in the downloads folder, but I can't activate the program, he repeated to me that the part of the file is missing

  Please check: https://forums.adobe.com/message/8163721

• The program monitor

  My program monitor only part of the image shows, is different from the source monitor and I do not see the whole picture proporply I'm editing.

  Magnification is set to the Fit; Resolution of reading is complete.

  Is there something I can do?

  Welcome to the forum.

  As David asks, more information will be useful. Please attention to provide pixel x pixel image size for your Source of the layer film (also list the PER - Pixel Aspect Ratio) and the size of the image in the sequence. There is most likely a mismatch somewhere.

  In addition, the Source monitor panel simply displays the Source of the layer footage, regardless of the sequence/project, in which it will be used. The program monitor takes into consideration this sequence and show, compared to this sequence.

  Good luck and please let us know a little more. I think that the solution to your problem will be in these responses.

  Hunt

• First CC 2015 - the program monitor turns black under a lot of effects

  So I worked on a video rather strongly. But it looks like a first or my GPU can not handle the amount of effects and layers because the program monitor keeps going black. Only solution is to restart the program, but if I change something or you move the timeline bar thing it just goes black again. Now she even at start up sometimes and it's really hard and boring editting. After he did this export is also impossible, it will give an error.

  I use Windows 7 and my GPU as a GTX750.

  I found a similar question on the forums but couldn't find anything useful. Is this a bug in the program?

  Run the types of effects that you use on this system as described, I'm not at all surprised that you get the results that you are. When the program "suffocates" past a certain point, it becomes totally wonky like that. How each of us "think that" this should work and how it does in reality are not necessarily related. I suggest to go to the Page of the Tweaker, where they made of actual testing of the systems in operation for years with Adobe video software, and look through their equipment.

  http://ppbm7.com/index.php/tweakers-page

  Neil

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo