Impossible to get a HD data recovery to set up

Similar Questions

• Impossible to get a restore date that gets me to where I need to be

  Had problems with updates (error 80070490) so I put windows any time upgrade disk in and now seem to have lost everything on my computer! When I try to do the restore or recovery it only gives me yesterdays date and keeps me where everything is lost! Advice appreciated!

  Hello

  1. partitions of hard drive how do you have on the hard drive before you perform the upgrade installation?
  2. don't start installation upgrade from the operating system or by booting with the upgrade DVD?

  It doesn't matter which upgrade DVD you used to perform an installation upgrade, restore points will be deleted again during installation.

  Everything is removed from the computer, the possibilities are:

  Option 1: If you had run the upgrade from the operating system installation, and if you haven't had that one partition of hard drive, then you should see Windows.old folder in the root of the drive where everything will be saved.

  Option 2: If you started the upgrade using the DVD upgrade installation, then either you could have backed up the old content (it is saved to the Windows.old folder in the root of the drive where Windows is installed), or you chose a custom installation (this will eliminate all present on the drive where you performed the installation and load a new copy of Windows)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to get Min, Max and median of the values in the date range values

  Hello
  
  I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»
  
  With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.
  
  In the light of the median value on these values.
  
  Thanks in advance.
  
  
  
  Requirement is as below:
  State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
  AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
  AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750
  
  
  * "QUERY ' * '"
  
  WITH t AS
  (SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 67 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 78 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 4 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 15 VALUE FROM DUAL
  UNION ALL
  SELECT "AZ" State, FROM DUAL VALUE 6
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 120 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 456 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 11 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 24 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 87 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 234 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 789 FROM DUAL VALUE
  UNION ALL
  SELECT "HD" State, VALUE FROM DUAL 54321).
  -End of test data
  AS T1
  (SELECT State,
  NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
  NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
  NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
  NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
  NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
  NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
  NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
  NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
  NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
  NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
  NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
  (SELECT STATE,
  CASE
  WHAT VALUE < 100 THEN 0
  WHAT A VALUE BETWEEN 100 AND 199 THEN 1
  WHAT VALUE BETWEEN 200 AND 299, THEN 2
  WHAT VALUE BETWEEN 300 AND 399 THEN 3
  WHAT VALUE BETWEEN 400 AND 499 THEN 4
  WHAT VALUE BETWEEN 500 AND 599 5 THEN
  WHAT VALUE BETWEEN 600 AND 699 6 THEN
  WHAT VALUE BETWEEN 700 AND 799 THEN 7
  WHAT VALUE BETWEEN 800 AND 899 8 THEN
  WHAT VALUE FROM 900 TO 999 9 THEN
  WHAT VALUE > = 10 THEN 1000
  END
  VALUE
  T)
  GROUP BY State)
  SELECTION STATE,
  "< 100."
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  "> = 1000."
  '< 100 '.
  + "100-199.
  + "200-299.
  + '300-399.
  + '400-499.
  + "500-599.
  + '600-699.
  + "700-799.
  + "800-899.
  + '900-999 ".
  + ' > = 1000.
  in total,.
  less ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') min_val,.
  largest ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') max_val
  FROM t1
  /

  Why not keep it simple?

  WITH t AS
  (SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 67 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 78 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 4 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 15 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 6 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 120 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 456 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 11 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 24 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 87 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 234 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 789 VALUE FROM DUAL
  UNION ALL
  SELECT 'MH' state, 54321 VALUE FROM DUAL)
  SELECT state
       , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
       , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
       , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
       , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
       , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
       , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
       , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
       , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
       , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
       , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
       , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
       , count( value ) "total"
       , min( VALUE ) "min"
       , max( VALUE ) "max"
       , avg( VALUE ) "avg"
       , median( value ) "median"
  from t
  group by state
  

• How can I perform a system recovery to get all lost data.

  I need help in performing a full recovery of the system to recover lost files and data.

  DavysLocker,
  Thanks for posting with us.  The only way to recover the lost data is if you have the backup of your system.  The system restore feature does not have the personal data.  If you use the Windows backup utility to back up your data, then you will just run the troubleshooter, and then follow the steps to restore data.
  If you do not have a backup of your system, then you can check with the local PC stores on data recovery.  Also, there are available data recovery programs but I don't know how they work although I've never used one. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Corrupted data recovery water Iphone 6

  We know anyway to get data of an Iphone that does not turn on?

  I am desperate to get my photos from my broken phone and a loan to pay for it, but I do not know if everyone can do?

  The photos I want are not saved on icloud to bring from the phone itself are the only way.

  However, it was damaged more than a month there are water and did not put in operation since

  Thank you

  The bottom line is not. You can pay a ton of money for a service of data recovery, but it is useless with the encryption using the iOS and the iPhone with your data. All what they will recover is meaningless strings of gibberish, not files and with no way to decipher gibberish it's worthless.

  Sorry, but that the data is finished now.

• SSD data recovery

  I spilled a glass of wine on the keyboard of my MAC BOOK PRO.  The SSD (1 TB) hard drive will not start.  I need to find a data recovery service to recover about 3 000 photos from disk.  Someone at - it services provider?

  SSD drives are not as recoverable as readers with magnetic rotating media. If the liquid got inside the car, maybe it's not recoverable.

  But the models of MacBook pro of 2015 should allow no liquids on the motherboard. He may not start for a much simpler problem aside, like a short circuit in the keyboard.

  If it were mine, I'd get another drive in an external enclosure and install Mac OS on it and see if YOUR files, (not more than 350,000 files comprising Mac OS) are recoverable. (The Mac can be installed on and boot from any drive appropriate, internal or external.)

• SSHD Toshiba MQ01ABD100H - Firmware / data recovery problem

  Hello!
  I have the mission critical data on a MQ01ABD100H of Toshiba to SSHD which was in a Sony VAIO for less than one year who decided to stop working from one day to the next. All I care about is the data. A professional data recovery company apparently reputable rated player, told me that it was a "mechanical failure", said they could recover the data and gave me a quote of $1500.00. A week later I was told something different; They said the platters and heads seem to agree and the problem seems to be on the circuit board and/or flash drive, and they didn't know how to recover the data. They told me that they have consulted Toshiba too. I asked them if they replaced the pcb Board and they would not tell me or answer questions more. I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  Here's what I know for sure; the bios of the machine of Sony VAIO Windows 8.1, correctly recognizes the drive. However, it does not start and is not accessible or recognized with cmd prompt Windows 8.1 UEFI options. The drive is not encrypted. After putting the reader into an external enclosure and its connection to another Win8.1 machine, the player starts with no extreme sounds of survey. Slowly, she clicks a few times as if the heads are looking, but then calms down and keeps running quietly. I have installed a Data Rescue PC3 software that recognizes the drive and its attributes correctly but can't read or clone. I have the Partition Wizard software mini tool, which recognizes the drive correctly, but shows the drive as being unreadable.

  That's what I'm trying to do. I'm looking for a donor on mine, with the same model drive, date, firmware, site, number of PCBS, hard drive code.

  Now, here is my unknowns and I appreciate everyone a preview with these. If I change the pcb edge myself, I need still more likely transfer the firmware for the new Board of Directors, even if I try it without doing it. I don't know where the firmware is stored, is there a rom chip or is it stored in the Flash Player. I'm not certain if, with this model of SSHD, if this can be done with replacement of the chip or the software? If it is stored on the Flash drive how is available independent of the HHD part? Must the reader Flash itself be harvested? But what happens if the flash player is bad, how can the firmware ever be recovered? Any ideas anyone? ... other than myself shot in the head, I'm kidding. I think that this may be a common problem that will often not resolved.

  I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  I am not an expert but if applications cannot access the data and cannot read data from the SSHD then you will need professional help...

  I found the storage Toshiba page where you could get details on this SSHD
  http://Toshiba.SEMICON-storage.com/e...ient-sshd.html

  Mate good luck...

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Data Recovery HP once recovery

  I moved my 'once' HP on a USB key and on an external HARD drive data recovery. Is there a way to make these bootable data again?

  Thank you

  Hi there @Brotocol,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you had the recovery of data on a USB key, put it on another hard drive and you want to know if you can take on this hard drive again.

  Due to software licenses, only a set of recovery disks can be created. This means that you could have done a copy USB or CD/DVD of it only. There is no way for you to get off the other hard drive to use it now.

  You will need toget a USB HP recovery disc or HP recovery disks. Please follow the provided document and follow the steps to order recovery media if you need.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, please let me know to publish again. Could you please include your model number (How can I find my model number or product number?) also?

  Thank you!

  Have a great day!

• Pavilion p6537c: Dead Win 7 C drive, should I go direct to 10 for a new disk? Ideas on data recovery?

  Question: Installing an operating system on the new replacement drive:

  750 GB hard drive on my Win 7 Home Premium desktop is completely dead. [See data recovery? below.] With regard to the new replacement unit 1 TB, I don't have recovery discs (my bad) and can get a USB bootable HP for $30 in 5 days.  But if I will Windows 10 in any case, would it not easier to simply direct that, assuming that I can download from the MS site?  Is this possible or do I have a valid Windows installed before 'upgrade '?  I have the serial number of windows etc. since it is a 64-bit licensed machine Win 7 legit bought new at HP.  There cpu: AMD Phenom II X 4 830 (D) 2.8 GHz and 6 Gig of RAM. Tips appreciated!

  DATA RECOVERY question: C drive would not start at all in a local computer store and they refer only to the people of data recovery. Any ideas how I could do this, or at least try, me? Otherwise, any suggestions on the most cost-effective way to get what I can (if any) out of the disc?  I don't have an idea as to why/how it has failed or the status of the Board at this point.

  Thank you very much!!

  Tommy

  From W10 v1511 that you do not have to enter a key when it is stored in the bios, W10 will find that during the installation, so you can just go right to the 10 and spend 8 installation.

  Even if it is not stored in the bios, you can enter a product key valid W7 orW8 during installation of W10 and he will accept it.

• How to use the data recovery disk

  I create data recovery in my hp envy m6 through portable dvd burner, but after the creation of recovery now when I try to install image recovery his does not work what do I do now?

  Hi dear_aneel2000,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you have a problem to do a restore via recovery CD that you created. I'll be happy to help you with this. You get an error message at all? What version of the operating system you are trying to recover? Why have you used a laptop DVD burner to create the recovery CD? What is the product number for your desire to m6?

  Thank you

• taken over by "data recovery file. cannot remove

  I was ibvaded by a program? calls the data recovery. He wants 87,50 USD to fix my problem. (WHAT PROBLEM? OTHER THAN THEIR INVASION?) Now I have wrnings as "sector of disk not found". I tried the system restore, but no luck.

  Hello

  (1) have there been recent changes to the computer before the show?

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• Usb drive data recovery software

  Suggest me a data recovery software that can help me get my files lost from my USB. Cheap and best is my expectation!

  Try these, they are free:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  http://www.SnapFiles.com/get/DiskDigger.html

  See you soon. Mick Murphy - Microsoft partner

• data recovery, which is losing vista recovery form

  assistance dear, my problem is that our data from laptop has been lost after restoring to factory vist dated 09/03/09
  so kindly help me on my data recovery which is very import for us. somebudy advised me that your previous data can recover with the help of the vista registry or another tool of vista, so I have no idea about this tool so kindly give me the step well can I work.
  I want to go to the office windows dated back where can I get our data lost, hope, you understand my problem.

  awaiting your response earlier.

  If you did a factory restore where everything is set as if you had purchased your laptop from the computer store, you can forget the Vists system restore because all previous restore points will have been dashed.

  If you continued to use the computer, your chances of recovering anything are falling fast outside. There are free programs but you must use them almost as soon as the data is wound up.

  Easy Recovery Professional 6.12 is the only product you could buy that would take no chance of working, but it costs about $700.

  The last alternative is to take the hard drive from the computer to a professional data recovery service, but it will cost you $$$.  Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************