Impossible to get the Vista machine see computers network XP Home

Similar Questions

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Satellite A200: Where to get the Vista recovery CD

  I boght the laptop and it came with Windows Vista professional.
  But it got a Virus. Thanks to the Norton which came with it and I had to do a system restore.

  And the reovery disc came with XP. I have the key for Vista on the bottom of my laptop but I don't know how to get another copy of Vista professional for the A200 to use...

  Can someone help with that...

  Very strange that s why you received the Toshiba XP CD recovery and not the Vista recovery CD?  :|

  Generally, if the laptop has been pre-installed with Vista then you should get the recovery CD Toshiba with Vista OS.

  In case you I would contact the ASP in your country to get the Vista recovery CD

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  You can connect to the Microsoft Store and retrieve your product keys:

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• Impossible to get w7 x 64 see network attached printer

  I have a Canon Pixma Pro9000 printer attached to a N4200 NAS from Thecus. All other PC can be printed on it without any problem, but I can't get the 2 PC running w7 x 64 to see the printer - still less to print! I went through all the procedures and processes, I can think of to make it work, but I hit a brick wall @ Can someone please help? I would really like to be able to print from these 2 PC without having to move documents to another PC all the time. All other network functions seem to work very well - it's just the printer problem.

  The other computers running Windows XP or flavors of Linux. I was expecting the settings to be the same as Windows XP machines.

  Thank you

  Hello

   

  Make sure that all computers on the network are in the same workgroup.

  Follow the mentioned methods:

  Method 1:

  Run the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Disable sharing protected by password on the host of Win7

  a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  b. expand the home or work network profile.

  c. under the password protected sharing, click turn off password protected sharing, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  I hope that the above information is useful!

   

• Impossible to get the CF 9 Admin to connect to the IBM/DB2 server

  I'm trying to set up a new Data Source in ColdFusion 9.0.1, CF Admin, to connect to the database/server of my company IBM/DB2.  The server IBM itself is 64-bit, and I use my computer at home with Windows 7 Pro 64 bit.

  We use the customer IBM/DB2 version 9.5 FixPak 4.  It is available in 32-bit and 64-bit versions.  I downloaded both and the 64-bit installed driver and it does not work.

  In Control Panel/ODBC Data Sources, System DSN tab, it shows the IBM DB2 ODBC Driver.  I have it configured with the correct host name, name of the comic, user name and password, etc., and fine tested connection here.  When I click TEST CONNECTION, the answer is 'successful connection'.

  But when I go to CF Admin and add this as a Source of data, using ODBC Socket, it shows my connection "named" Control Panel/ODBC.  But when I try to connect, I get the answer: "UNABLE TO VERIFY for the opening of SESSION and an ARCHITECTURE MISMATCH."

  Question: CF 9 Admin does support 64-bit ODBC drivers? Wonder if this is the reason why Windows ODBC will make the connection, but Admin CF won't.  If so, I could uninstall the 64-bit driver and install the 32-bit driver and try again.  Given that few people at work know ColdFusion, I don't have a lot of support here.

  I installed the 32-bit driver on my Windows 7 desktop PC, but it has Windows 7 32 bit.  I have also updated the drivers on several Windows XP SP2 client computers, using the same IBM DB2 Client, but the 32-bit version.  All of you who work very well in CF Admin.

  Hope someone has tried this and has some tips on how to connect to a database of IBM/DB2, CF 9.0.1.  And if Admin CF9 supports 64-bit to connect drivers to other sources of data?  FWIW, all my other Admin SEE data sources (various company Oracle and other servers) work correctly in CF Admin, but I use the default ORACLE supplied with CF9 drivers.  I can't use integrated DB2 drivers for CF9, they are not compatible.  You must install the IBM DB2 client, in order to connect to the database/server IBM.

  Thank you for any help or advice.

  Gary

  Finally got the drivers IBM DB2/JDBC installed, configured and running on my Win7 64 bit PC.  Should be the same game on our server Windows Server 2008 R2 production at work, so am all together.  Still using CF 9.0.1 64-bit, fortunately.  It's the 2nd JDBC connection, I was able to set up correctly (using 'OTHER' as the DSN), including Teradata JDBC.

  When you download and install the IBM DB2 9.5 IBM drivers, you will find 2 JDBC drivers, you will need, including a JDBC class 4 driver, on your hard drive (in the folder: c:\Program Files\IBM\SQLLIB\java).  DB2 drivers that come with CF9 are for mainframe DB2 and do not work in the DB2 server environments.  Although we have 4 IBM 3090 mainframes, I needed that connection to our data base 30-Server DB2 Warehouse.  After 4 months of trying, finally figured it out and it works fine.  And just as fast, or faster, than the connection ODBC 32-bit that we use on our older servers, 32 - bit.

  That I did not "understand is that even after the Adobe technical support call, they were without help.  They wanted $250 for a call of 'pay-per-incident', and there was probably no guarantee they would have the answer I needed.  Here is the answer I realized myself today.  Hope it helps others and saves the cost of an expensive phone call (or hours of Googl'ing).

  Here is the procedure, if it helps someone else. Or if you had to get rid of your DB2 32-bit ODBC Socket connection and try the class 4 JDBC drivers that run on machines of 32 or 64-bit.

  1 copy these 2 files in your root CF bin folder (for example, C:\ColdFusion9\lib) db2jcc4.jar and db2jcc_license_cu.jar

  2 Add db2jcc4.jar and db2jcc_license_cu.jar to Java and JVM paths (restart CF application server)

  3. URL JDBC: jdbc:db2: / / MyServerName:MyPort / MyDBName

  4 driver class: com.ibm.db2.jcc.DB2Driver

  5. Enter your user ID and PW and SUBMIT.  No connection string is necessary, and no other change in advance settings.

  When I got the Green letters that said 'connected successfully', I was thrilled.  So I ran some queries to test, and they all ran fine and fast.

  As mentioned, been trying for months find this procedure by manually configuring the drivers JDBC is something new for me.  It is not difficult, but if you never did, you don't really know, do you use?  In any case, I hope this helps someone else using a PC/Server 64 bit.

  Gary

• I need to reinstall vista. I have the product key but no cd.dvd. where can I get the vista op sys to load?

  I need a vista clean reinstallationof. I jave an Acer laptop and I have the key product for the vista operating system installed which has completely disappeared. How can I get a copy of vista to reinstall?

  Hello

  See if you have a Recovery Partition of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel

• The mouse is confused - almost impossible to use the virtual machine more...

  Hello

  I use a number of VMWare (6.0.7 build-2844087) sessions player on my i7 quad core Windows 8.1 system for separate processes.  I don't do anything in my main boot environment is nice and clean.  I have a player for web browsing, one for email and a few others (game, video editing, etc.).  This separation gives me an easy backup/restore option for any computer virtual as well as prevention 1 VMS are attacked/infected/hacked/etc most I can lose, it is what is in this virtual machine.

  Something broke all of a sudden.  I don't know if it was the last update for VMware tools or some change made by windows update or maybe even a setting that I did.

  But now, my mouse is very confused.  If you look at the picture, you can see 2 pointers.  The bottom is my VM. The top appears with the VMWare container think that the mouse should be there. And the relationship between the 2 pointers constantly changes.  So I can select something in the virtual machine, but the tank of the virtual machine can think the mouse is on the VM bar and when I click the virtual computer closes, presentation of the changes of the screen, minimize, etc..

  

  I did some research.  All of my text is set to the smallest size (the most common fix I found.)  I have re-installed VMWare tools.  I tried to change the mouse settings in my VM and the primary host environment.

  It's to the point where I can't click without 1st checking the top of the window on my main screen or risk losing work, etc..

  Any help is GREATLY appreciated!

  Thank you

  If anyone is interested in distance, I finally solved the problem.  My guess is that I could have reinstalled the main operating system.  Instead, I've upgraded to 10 Windows and then installed Player 7.1.2.  On the plus side, no more problems with 2 pointers mouse with one randomly showing where and when he wanted.

  On the negative, I always have to press Ctrl-Alt to get to the VMWare bar at the top of the window.  But it is a small price to pay for now to be productive again.

  FWIW, my guess is that upgrading to 7.1.2 is really what makes the difference.

• Impossible to deploy the virtual machine with customization.

  Hi all

  I have a model Winodws 2008 R2 Std and Ent.  I use to deploy virtual machines with the model using the Customization Wizard.  All of a sudden since 2 days I can't provision VMS with the wizard of customiation.  Earlier, there seems to be no problem with the customization, but when I turn on the virtual machine, I see errors, attached is the screen shot for your reference.

  After the error 2 the vm keeps restarting without end time.

  I don't know what is the cause.  Please help me with the problem.  Let me know if you need additional information.

  Thanks in advance.

  Hey there,

  Have you tried to get the Microsoft Windows product key? And maybe the password in the profile customization.

  If this does not work, try using a new profile customization.

  Let us know how things work!

  See you soon,.

  René