Impossible to install CanonMX320 printer connected to the PC desktop to my Acer Netbook

Similar Questions

• Impossible to install Brother printer (even with the latest drivers for windows 7). I suspect it's other print network drivers. During installation, the Brother software reports "the operation cannot be completed (error 0 x 00000706).» The print processor

  I upgraded from Vista to Windows 7
  When I try to add the printer manually, I can't select all ports.

  Plug the printer causes Windows to try to install a driver, but it fails.

  I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.

  Installation of a Brother printer still does not work.

  Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
  Thank you!

  ===
  Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
  Also ran sfc/scannow without error
  Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.

  OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.

  They have become like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  «Pilot '=' "PSS08B07."» DLL.
  "PSDriverLink"="winprint.dll".
  «C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\USB Monitor]
  «Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
  "PSDriverLink"="usbmon.dll".
  «C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.

  etc...

  ============

  Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
  i.e.
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  "Driver"="winprint.dll".

  etc...

  restarted and it worked!
  Too bad, the troubleshooting of Microsoft tool could not detect it.

  See you soon!

• SE message: printer not detected, the printer connected to the wireless modem and I can't print

  Original title: printer connected to the WiFi modem and pc but get message saying unable to print printer not detecded

  printer not detected on pc but it is installed and signel wirless right message bed printer not detected

  Hi howard douglas.

  1. were you able to print before without any problem?

  2. when the problem started?

  You can try to connect the printer directly to the computer and check what is happening.

  Check out the link:

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Aspire One D255E don't look for a printer connected to the USB port

  My D255E an Aspire don't look for a printer connected to the USB port.  I've never used a printer on this computer before.  Windows 7 Starter will support a printer?

  It should be.  Try these steps and results reports:

  When you turn on and connect the printer via USB, shows tasks for animation in the system tray at the right end of the bar, click it and monitor driver installation.  If the pilot goes then printer must print and perhaps scanning of base via the Windows fax and scanning utility.  To find such a piece of utility type its name in the search box.

  If the driver does not load type of devices and printers in the box to start the search, open it, check if printer is already displayed, right-click on it to open the properties, and try to print a Test page. If it does not print right click on printer again to solve problems.

  If the printer is not listed visit Support downloads of the printer Web page to download and install the base driver.  If a wireless printer, you will need the complete package to do it fully implemented.  If you want to be able to scan from the top of the printer to the PC, then you also need the full package.  Keep track of the configuration screens when you install the software.

  If you still have problems after return the exact error with photos if possible.

• HP 4500 g510n-z-printer connected to the router but not responding do not

  Hello

  I got this printer (HP4500 G510n-z) for 3 years. This worked without any problem until I changed my router and installed a nas on the LAN Server.

  Now the printer is connected via WIFI to router and is perfectly installed on computers connected to the router. But it does not work. I used HP Print-Scan doctor and he finds the device, but it was not connected. I tried to connect to the printer IP of all computers, but I have not received any response (using ping, it doesn't have 75% of the package). On the router configuration page, the printer is connected to the usual IP and on connected computers the TCP - IP is configured correctly.

  I have tried everything and I managed only to reboot the router. But it did not last, each computer remains connected only until you restart the PC nex.

  Sorry if I'm not too clear, please don't exitate ask for more details. Thanks for your help!

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Desktop sharing, allow two users to connect on the same desktop

  Does anyone know if view Horizon be configured in such a way that:

  -Two (or more) users can connect on the same desktop

  -vSGA can still be used

  The reason why I ask, is that in my area there is a request for collaboration in which two people on different locations want to go through a 3D medical treatment plan and discuss on the phone. Documentation of the Horizon does not say that it can, but it does not say that he can't.

  There is nothing on the Horizon that would in native mode.  You must use a product type to have two people viewing the same third party screen sharing office.

• Cannot install my hp l7590 printer my printer connected to the network via another computer

  I have win 7 computer and the printer attached to the xp computer

  When I click on add a printer, I can see the printer but when I try to install it

  Windows says it can't find the driver in the network after watching it in windows update

  I tried to find it manually in the directory of the software for the printer hp, but I don't know which

  Using INF file

  If anyone can help me

  I will appriceciate it.

  in amir thanks

  Hi amir40,

  You have a more intermittent connection if you connect the printer to your router and then install the printer on computers using the network. Here is a document on how to connect the printer to your router.

  http://support.HP.com/us-en/document/c02279915

  If you want to continue with the print share. See the following document below.

  http://search.Microsoft.com/en-us/results.aspx?q=printer+sharing+USB

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• HP DESKJET 2540: My HP printer connects to the wrong wireless network

  Hello

  I use a MacBook Pro, OS X 10.9

  I have a printer HP DESKJET 2540

  I just installed a new network at my place. I'm trying to connect my printer to this new network wirelessly via WIFI.

  BUT the printer keeps on connecting to the previous network, which is an open access network (FreeWIFI)

  I've tried EVERYTHING. I pressed simultaneously the Wireless button and the button to launch the copy in black. The wirelss test report shows that my printer is currently always logged the previous SSID

  Help, please!

  TX

  Hi @JACE1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 2540 guard wrong wireless network connection. I'm happy to look into this problem of connectivity for you!

  On the wireless test report, must be an IP address from the printer. Try putting the IP address in a web browser, such as: Safari or Firefox, etc. You should see a built-in Web server. Find the network tab and then select it. Then, look for the wireless configuration wizard option. (This should be able to search for the network wireless appropriate for you).

  See page 55 of the User Guidefor more details your printer.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• printer connects to the computer, but the two are connected to a wi - fi connection

  Printer connected to wi - fi and laptop works fine, but when I try to install the printer to computer keep getting installation failed

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem is not resolved, please provide more information to help you best.

• Impossible to install a printer

  Im trying to install a c3200 lexmark or a lexmark 1100 two nand jetprinters rpet access denied. When I try to install

  A little more information please:

  1. what version of Windows is installed, including service pack?

  2. how the printers are connected to the computer?  In particular, are these network or shared printers?

  a. If printers are shared, what operating system is on the computer to which the printers are connected physically (including service pack)?
  b. If the printers are shared, you are able to share files between computers (in both directions)?
  c. If the printers are shared, is the user account that you use to install "computer administrator" or "limited user"?

  3. do you use a CD that came with the printer to do the installation?  If not, how you try to do the installation?

  4 are all other printers installed and working?  If so, how these are connected to the computer?

  5. are there other installed printers that you deleted?  If so, when, why and how did you remove them?

• HP OfficeJet 5740: printer connected to the internet

  Hello!

  So I recently got the Officejet printer and I was not able to connect it to my computer.

  I live in the dorms of my college and internet needs to go to a website and log as long as student.

  I don't know not to connect to the internet.

  Help?

  Hello

  Please contact your network administrator. In many dorm environments, administrators will not allow students install printers wireless on the uni/College networks. I myself would not install printers on this environment because people can use easy my printer to print their documents. Again, you have need to talk with your network admin how to connect (if you were smoking to) your printer safely.

  Good luck.

• Printer connected to the network, but it is not

  Hello world. Could someone help me please. I bought a HP4620 to use with my IPad. He ok installed and connected to the network ok. The problem is that sometimes it prints and sometimes not. Print the Configuration page it says that it is connected, even if the iPad don't see. He gives in detail all the same in every situation.
  When the iPad can't see the printer if the wireless hub is restarted everything goes back to as it should. 1 hour later and it went again.
  Can someone help me please?

  I think that this is a business hub 3 if it changes anything?

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you