Impressions seem crushed

Similar Questions

• Satellite M40X-189: screen seems crushed

  I used the function SPACEBAR keys to zoom on a screen that had very small print. When I did it again to return to the initial display, it didn't quite back to normal - each screen now seems a little overwritten, which means that different and slightly fuzzy fonts, and all images are distorted. How can I reset to the original values? I went through start/control/display panel and all the options there, but nothing obvious seems to need fixing.

  Hello

  As far as I know, this function works when the web browser such as Internet Explorer or Firefox is open and displays Web sites.

  However, have you checked the option 1 FN or FN + 2

  If not then try it

• 16:9 ratio crushed in CS4

  Hello

  I am a teacher of Autralia. I'm helping a student with the editing of a film in Premiere CS4. The student shot his film in 16:9. When we look at the images in Windows Media Player, it is displayed in widescreen (16:9) mode. However, when it opens the file in CS4, it is squashed horizontally, looking closer to 4:3. When I checked the properties of the file, the width is 720 and the height was 576. Is not a ratio of 16:9.

  The student is also the insertion of animation (from Toon Boom Studio) files in his film. Confusingly, these files keeps their 16:9 ratio when inserted in CS4, so that they appear larger (horizontally) as live action images.

  I have three questions:

  (1) why the images display only 16:9 in CS4, when it does in Windows Media Player?

  (2) if the film seems crushed in CS4, it will look squashed when it is exported in a movie file?

  (3) can adjust you settings in CS4 so that the images are shown in the program in 16 / 9? If so, how?

  Thank you very much for your time!

  -Robert

  The sequence is just fine after interpreter it widescreen PAL and yes the animation is a bit small.

  If you do the animation for video with square pixels or even still images dimensions for PAL read 1050 x 576 (wide screen). This is because Adobe has changed the IRON in CS4.

  I don't know if you can export the animation once again, or you can scale the width up to 103% in the controls of the effect.

• OfficeJet 4500 will not print black ink

  Our small office now has an Officejet 4500 a few months without any problems. Today, it stopped printing any black ink.

  -J' changed the cartridge to be sure, but at no time has it says low ink. This fixed the problem for a few pages but the problem popped up. I align the cartridges after the installation of the new cartridge.

  -J' tried to clean the contacts on the cartridge itself.

  -The functions still scanning and color ink can be printed.

  -Overall impression seems slower, apart from the question of black ink. You know not so bound.

  -The all-in-one has been used more frequently in recent weeks.

  had the same problem, I have the hp printer 4625... I tried the self-cleaning ink printer cartridge under Tools-> cleaning ink cartridge and it worked for me...

  don't know if you tried yet, but if not - it give it a shot

  I hope you will manage to fix it!

• Portege R600 - black or dead pixels?

  Hi all, have a serious problem with what appears to be suddenly occurring dead on my R600 pixels. See here:

  http://img7.imageshack.us/img7/9523/toshibar600deadpixels.jpg

  It is actually the second time that this has happened. I got the R600 since November 2008, and in March 2009, I had the screen replaced because several lines of pixels black from appearing near the top of the screen.

  Now it's August 2009 and the same thing is happening, but in the lower part of the screen. About two weeks, two thin lines appeared around an inch upward from the bottom of the screen and almost thick strip of black pixels will appear at the bottom of the screen, and also two big spots of black pixels at the bottom left of the screen that appeared last week.

  The kicker is that the authorized after-sales service suggests that the screen is 'damaged' now because of the two tasks, but I tap anywhere on the screen! Because it is considered to be physically damaged, it would be outside the warranty coverage and would cost me $350-$ 700Cdn to replace the screen! I was capable of that escalate to a supervisor at Toshiba Canada and I'm supposed to hear within 2 to 3 business days.

  Needless to say, I'm not impressed; seems almost every quarter, I encounter this problem and now Toshiba can't even fix it for me, even if it is no fault myself.

  (Note: I use this laptop in an office/retail environment;) I protect and treat this unit of $3000Cdn as a baby and never put pressure on the screen. My R600 is either docked or in a case of Zeroshock and during the transport of it, I put it in a bag with padded back.)

  Does anyone else have this problem? Any ideas on how I can solve this problem with Toshiba?

  THX,
  nomad416

  PS by the way, is this forum especially for users of Toshiba Europe? I'm at the Canada and can't seem to find a forum on the site www.toshiba.ca.

  Hello

  I found very interesting FAQ from Toshiba on the web:

  + Information about the technology and pixel for LCD screens display fault tolerance +.
  http://APS2.toshiba-tro.de/KB0/TSB9502LZ0000R01.htm

  The display can be replaced and would be covered by the fair only if a certain amount of dead pixels would be visible on the screen.

• Not printing - USB attached deskjet 720c, made an error in HPVSCP50. DLL

  I see many questions like mine, but try to reinstall the drivers for WIN 7 64 Bit OS does not seem to work.  I went as far as the deletion of the HP dll and INI of C:\windows\system32\spool\DRIVERS\x64\3 files that have a date of May 2008.   Add new printer only get of me that these same PGE back.  My impression seems to work, goes to the spooler for device, shows on Quebec for a short period of time and can be deleted.  The journal of the err shows err:

  Log name: Application
  Source: Application error
  Date: 10/01/2013 09:26:58
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: John-PC
  Description:
  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  Name of the failed module: HPVSCP50. DLL, version: 1.0.0.6, time stamp: 0x4431bcd4
  Exception code: 0xc0000005
  Offset: 0x0000000000010af7
  ID of the process failed: 0x1bb4
  Start time of application vulnerabilities: 0x01cdef46b1720d89
  The failing application path: C:\windows\Explorer.EXE
  Path of the failing module: C:\windows\system32\spool\DRIVERS\x64\3\HPVSCP50. DLL
  Report ID: 2b8f5d99-5b3a-11e2-86d9-00266c264c16
  The event XML:
  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."

  I see other people having this problem but I can't seem to get the printer going on the new USB port on a new computer laptop.

  I don't connect when you said that a few post back as your printer is connected using a parallel to USB cable. Now that I have a better understanding of this aspect, I can tell you that it may not work again. Unfortunately, the type of connection that uses the printer is very outdated and is no longer supported because of the potential problems that may result. I'm willing to bet that the issue of installation does not deal with the laptop itself, but the laptop cannot communicate with the printer without communication problems.
  
  My honest suggestion is to check out some of the more recent deskjets or small officejets and see what we have available to replace this unit. Much product HP printers are now improved print quality, ink longevity and increased functionality (wireless, scanning, etc.).
  
  I hope I have shed some more on the issue.
  
  Let me know and have a great day!
  
  

• Office Jet 4650: Office Jet 4650 does not print web pages

  Just set up a new office jet 4650 printer, and I can't seem to print web pages.  Another impression seems OK, but can't get an answer at all when you try to print a web page.  In addition, just installed OS 10 Windows on the computer.

  Can now print.  "PRINT" key was hidden under another page.  Still difficult to reach PRINT button, but I'm working on it.

  I'm sorry to bother you.  Thank you for the city.

• PIXMA Pro-100, very dark print

  Hi all

  I just bought my Pro-100 and installed yesterday evening. I upgraded to an HP that was strictly CMYK (only 4 ink). I installed according to the instructions, but my impressions seem to come out substantially darker than they should be. Lime green print darker green. The bright blue print a darker blue. The bright red print a very dark red. Roses are dark pink print. The tones are much, much darker than they should be.

  I print Adobe programs (Illustrator, Photoshop, and Pro - CS6 all). Am I missing a setting somewhere? On my previous printer, I would choose "primary preserve CMYK" and it printed perfectly. Now, I can't seem to get my impressions a normal colour. I'm not attempt "to match my monitor", just trying to get the colors closer to their true colors. I have CMYK primaries preserve not controlled and checked that the printer determine colors, but none of these options seem to be able to help.

  I called Canon support, but they were unable to help me. He had put me my settings all default return and test printing. When this does not work, he said "good printers vary by brand so theres really nothing we can do about it." I can't imagine that this big of a printer prints it off on the colours.

  Any help is greatly appreciated!

  "... There's nothing we can do about it." »

  Well, of course it is not true.  I have three of these printers in this line.  The 9000, 9500 II amd Pro-100.

  They are all printed differently, but after a bit of tinkering with settings, they all did very well.  They are great printers.

  First of all you do not leave the printer defined anything.  Cut each little out of control there.  You can do it with the Canon My Printer the printer settings tab.  Do you know how?  I think, Yes, for the moment, but if you don't come back to me.

  Secondly, you must have PS manage all settings and corresponding color.  You know how to do this?

  And finally, it is essential that you get some settings on your monitor which corresponds somewhat to the prints.  Your printer can do exactly what you say to do, and not sure that it is.  Because your monitor is turned off.  If you don't do this step, you can forget the other steps.  However, there are only a few things that must be addressed.  You don't need for any fancy additional modules to do this.

  But you must get very narrow gray-scale.  You must get very close brightness and you must close contrast.

  Once you do these things, you can make adjustments to your impressions by looking at just your screen.  Because you know that the monitor and printer are on the same level.  Another point, you cannot get a printer to print all colors exactly as you saw.  It is not possible because all the colors and adjustment in effect all the others.  My goal is to get the right tones.  That's what people notice.

  For example, I know that my most recent Pro - 100 tends to print darker than what I see on the screen.  So I automatically know to set it's prints a stop brighter in PS.  It also prints with a warn a little tone.  Most of the time, with in particular, protraits cela if OK, but sometimes it is not.  In this case I set the 'temp' slightly cooler setting in PS.

  Make sure that you have the correct ICC profile and that you use brand ink Canon and paper until you get well with the printer.  Very, very important!

• HP Officejet 4622: Printer HP Officejet 4622 cannot read alignment page

  I use a HP Officejet 4622. It ceased to print correctly. I've cleaned and tried to align the heads, but the impression seems to be so vague that the printer cannot read the alingment sheet when I try to scan to complete the process. Is that what I can do to fix this?

  I answer my own question in the hope that this will help someone else. It apppears that he wasn't the printer at all, but the air holes on the black cartridge which was covered by plastic. Plastic packaging didn't completely when I took it to install. I just kept checking up to what I thought of her, hope it saves someone some time.

• In XP, Dell 305V printer getting error message ' alignment error remove tape or try again.

  I changed my ink cartridges (removed protective tape) and Dungeon, error message: erreur error alignment, remove the tape or try again. I tried to line up once again, did not work. alignment page impressions / seems fine. so I tred to ignore alignment and print but it comes out of the Virgin. I downloaded mast set and did a scan and they couldn't find anything wrong, so now I'm asking here. I have a dell 305V printer

  Hello

  You can check the link that contains information about the error, you receive below: http://support.dell.com/support/edocs/systems/v305/en/ug/d0e6773.html#troubleshooting-chapter

• How do I change size of window and the police?

  Hello
  I have window vista Home premium with screen wide dell (I'm not sure of the exact size, but it seems really close). I have recently reinstalled the OS. The internet issue is fixed (thanks!) But now, I'm having a problem with the police and the window size.

  Here's what I did to solve the problem.
  (1) Control Panel
  (2) customization
  (3) display configuration (1024 x 768 or 800 x 600 don't look right!)

  So I did all that, but still, it does not solve the problem.

  Here's how it's used to look like:
  | space | content | space |

  But now it looks like:
  | c o n t e n t |
  The Web site did not use "using" all the space of the monitor, but it does now.
  Thus, the letters, images and all content (including the menu taskbar and startup) seems crushed and expanded horizontally.

  How can I solve this problem?

  Hello

  As you reinstalled the operating system, make sure that you have the drivers for everything.

  Here is a link to driver downloads Dell (select your exact model);

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• 5505 all-in-one printer not print some pdf images.

  5505 all-in-one printer not print some pdf images. the paper passes through the printer, but no image or text is printed on the paper.

  This seems to happen when the document is an 'image' and the text is not "searchable".

  Windows XP.

  no error message.

  recently started using Adobe Acrobat X (I had already been using player)

  When I made this switch, the scanner has stopped working and I uninstalled the software of the full suite and installed the basic print driver. it: HP officejet basic driver.

  After loading the base driver, scanner worked again and most impression seemed to work, all the other documents I've tried seem to work well. (If I save as word or jpg), with the exception of pdf images.

  I think I remember having a similar mistake many years ago, but the "BestModeUpdate.exe" said that it is not relevant with the latest driver.

  Hello

  Please try to print the PDF file as an image and check any changes:

  Open a PDF document and open the print dialog box.

  Click Advanced.

  Select check as Image and try printing.

  As the issue began after replace the PDF software and any similar behavior does not appear for other applications, it seems like a problem in the software Adobe Acrobat... That's why I suggest you contact Adobe support.

  Kind regards

  Shlomi

• Assistance remotely - re-use of Invitations

  Is it possible to resue invitations without sending again?  I am able to use RA without problem.  BUT I want to be able to configure the computer that I am helping with a standing invitation, so he should not be sent whenever someone needs help.  But every time I open my computer, it seems "crush" the invite when I choose to use again.  Is it so RA works?  Must the remote user always return an invitation?  Is there another way to set up a remote connection without having the end user to restore a relationship?

  I have an end user who is not computer and I want to make things as SIMPLE as possible for them when / if they need assistance...
  Thank you
  JD

  Hello jcduk,

  Yes, the invatation to Remote Assistance, must be given each time by the end user, but also remote users. This is how Remote Assistance works. Although some configurations of server doesn't required in its infrastructure. Hope this helps you. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• OfficeJet 6500 only prints the top of the page

  Have a problem with getting my Officejet 6500 to print the entire page.  Top of the body impression seems to be running on the top of the page, as if the paper was not inserted enough away early in the cycle of printing.  Became "paper mismatch" error message briefly, but that does not appear now.  To check the installation of the printer for proper paper size (8.5 "x 11").  Was printing normally until recently.  Uninstalled and reinstalled HP web page software.  Any suggestions?

  Problem seems to be resolved!

  The printing Assembly that fits into the back of the unit was not completely seated.  There is no warning generated unit that the Assembly was not in place, just erratic behavior and various messages like "out of paper" and jamming of paper.  I recommend that if you are having similar problems, that you check carefully that the back print Assembly is properly inserted into the machine.

  Kind regards

  sciencediver

• How to receive faxes in the folder (HP Photosmart C7280)? Help, please!

  Hello

  I want to receive faxes to a folder instead of printing as faxes come. I am operating Windows XP with my HP Photosmart C7280 all-in-one. I have impression seems a lot, just that the ink runs faster in this economy!

  Thanks for any help!

  TP1

  Hello

  Photosmart C7280 does not support save incoming faxes on PC. However, there are other printers supporting it as HP OJ Pro 8500 series, HP OJ 6500 series, HP OJ 4500 series. Check the specs on the HP Site and to buy the printer that meets your requirements.