Inspiron 5000 all-in-one question

Similar Questions

• Dell Inspiron 3043 All in One-2nd monitor?

  My dell is not detect a 2nd monitor when I connect it to my Acer monitor.  I tried to use the VGA cable with a HDMI adapter.  I also tried to use a DVI cable to HDMI.  The Acer monitor only has VGA and DVI - D connections?  Is there another way to connect the 2nd monitor?

  I have the Dell Inspiron 3043 all in one

  You can consider using a USB2 > DVI - D or USB2 > adapter VGA to connect the second monitor, but they are not exactly cheap.

  And if you buy one of these adapters, make sure that the one you get can clone (1) internal display, (2) extend the desktop on 2 screens and (3) show 2 different screens simultaneously and is compatible with any version of Windows that you are using.

• Inspiron 23 "all-in-one monitor

  read a comment that the screen of the monitor on the aio 23 "is very reflective.  no further complaints on screen?

  Hi Szigy,

  I answer on an all in an Inspiron 23 "now. It is a reflection of what some because it's a glass screen and it is a touch screen. I have no problem with the reflectivity and I wear glasses. I have no complaint on the screen. If you have any other questions, feel free to ask me questions.

• Inspiron 2330 all-in-one, white screen on startup after Dell Logo

  Hello

  I just bought an Inspiron One 2330 with Windows 8 this week which was working fine until today.

  When I go to it starts, I get the Dell logo and Windows 8 points floating around in a circle below. When these disappear after five or six seconds, as often happens with the boot process, nothing happens. It allows access to the screen of Windows 8 with time and this landscape of space-age thing, but now I get nothing, just a blank screen.

  Please could someone help? Everyone knows this?

  Thank you

  Hywel

  I thought that I will answer my own post because I have not managed to solve this problem after the effort of several hours.

  I managed to enter the automatic repair of Windows by following these steps. After ignition, the Dell logo appears then the swirling circle. Is immediately turned off by pressing the power button until it stops. Repeat 2 times more, how the computer would decide that Windows fails to start, so it should start the auto repair.

  The automatic repair feature spotted that there was a problem with the video driver (as I suspected) and disabled. I could then restart normally and use system restore to return to a game without the danger of drivers, before I was running Windows Update.

• Automatic start after power outage - Inspiron 20 all-in-one

  I cannot find a setting of auto-start after power failure in BIOS, Inspiron 20. I really hope that I missed or can we make it happen another way. Someone at - it something?

  Thank you!

  Control Panel, system, advanced system, the boot parameters. But this isn't for the system failure power failure. Sorry - I read your post too fast.

  I don't think that today's computers can auto start after power cuts and even if it is possible, it is not recommended. Buy a battery backup UPS as APC must prevent interruptions of power failure and give yourself the time to shutdown properly.

• Inspiron 2305 All In One unit

  Has anyone tried to modify the active field for this model?

  I talk with 3 different technicians of Dell and each solution, they gave me has failed. A tech met with his supervisor, and they said the motherboard was bad. I tried the asset.com on a new utility in the cabin and received the same "active/serial number is not supported on this model.

  Dell support has really need to deepen and their solutions of test before they offer a solution.

  -Marcos

  I worked with a higher level of Dell tech who worked with its engineers. They were able to find/create a utility that works on the 2305 s active AIO. If anyone is looking for it, I can pass it on. Otherwise, raise, raise, raise to your Dell representative to get the results.

• Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

  Original title: cannot find the printer

  I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

  the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

  software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

  This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

  Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

  anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

  operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

  told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

  If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

  My thanks in advance

  Peter

  Hi Peter,.

  Thanks for posting this question in the Microsoft Community.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any security program installed in the computer?

  2 what Microsoft FIXIT did you use exactly?

  I suggest you to install the drivers for the printer and check if it helps.

  You can also go through the steps in the article and check.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Pro Tips: Troubleshooting scan to E-mail questions in e-all-in-one printers and ePrint

  Hello e-all-in-one printer users,.

  If you're reading this, chances are you have a problem of webservices in your HP e-all-in-one printer. If you can not scan to e-mail, use ePrint, or get a code application, this post is for you.

  Many of later vintage (2010 and beyond) Photosmart, ENVY and Officejet series e-all-in-one printers share the same Web services and Wireless features. Within these series printer, you can enable wireless and Web services (ePrint, scan to e-mail, printable sheets) connectivity of the façade do their installation for use with Android, Windows, iOS, Macand Chrome OS much simpler than the old printer models. Of course, when things go wrong or there is confusion about the use of the printer and features such as printing and scanning to e-mail stop working, the correction of these problems is the same in most of the models.

  WebServices are not connected: what affects?

  When the webservices connectivity is lost ePrint, scan to e-mailand pads features will stop working. If you are just getting started with the installation of your printer, the inability to generate a code application (to add your connected HP printer or sign in to Instant ink) can be attributed to not being able to afford Web services. If you are affected by any of these questions, read on. I have some suggestions that might help.

  Ordinary remedies

  • Before set you Web services, make sure that your printer is connected to a network, either via an ethernet cable or Wirelessconnection. Print a report of Network Configuration of your printer front panel (usually this is located under Tools / reports) to confirm an active ethernet connection.
  • If you are connected wireless, touch the wireless icon printer . If you see as connected and there is an IP addresses starting with 192.168... or, 10 grand. If this isn't the case, run the Wireless Setup Wizard to connect you with your network name (SSID) and enter the password wireless you are prompted.
  • Ensure that the date and time your printer settings are correct. You can check and adjust this via the front panel of the printer in most cases and trivia: the printer Web server integrated.
  • Now, with network connectivity guaranteed webservices icon or (depending on model) and try to activate Web services.
  • If you have managed to connect and a leaflet printed, or at the very least, an [email protected] address is displayed on the front panel of the printer, perfect, Web services are now functional. This means that you can now ask your HP printer connected , or use one of the above characteristics *.

  Note that ePrint and scan to e-mail feature are addressed later in this post if you still need help with these functions.

  • If the webservices are always not, try your printer restore default*.

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom @hpeprint.com address that it will be permanently deleted. For more information on custom addresses ePrint, click here.

  Here's how:

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings
  • Note this new printer may contain this setting under the heading maintenance of the printer instead of tools.

  Then, to reconnect to your network (wired or wireless) and try to set a manual DNS:

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer), and then press Enter to go directly to this page. This should take you to your built-in Web server (EWS) printer.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.
  • Note that menu above EWS items can vary in overall models of printers. If you do not see the exact topics that I've listed here, the subtopic you should always appear on the Networking tab.

  Then, press the icon of Webservices or and reactivate your webservices (required for scanning to E-mail, ePrint , and other functions).

  Then, if a scan to e-mail question has led you to this position, tap the scan icon and enter the email address that you want to scan to.  Then, recover the PIN code that you should automatically receive by e-mail and complete your scan to E-mail setup by entering this PIN code in your printer.  Ideally, if you are able to get this good service will be fully functional.

  Alternatively, if ePrint is your main problem and all the above (except for scanning to E-mail steps) suggestions worked, try emailing your printer a print job. If it prints correctly, ePrint is back online. If you are a user of HP ePrint app, the app did automatically detect your printer? If not, go to the application settings and manually add your printer to the app using either ask you code or IP address of the printer. Finally, if you're a printable, user use your favorite applications on the front panel of the printer, or via HP connected.

  There are advanced troubleshooting steps beyond what I posted here and you can find them in the Forum such as displayed by the employees, Experts and members of the community. Start with the basics and if you still can't not to take advantage of Web services from your printer don't be shy to reach out - HP Support Forum's is a great place to exchange ideas and help each other to get the most out of our products.

  Thank you for taking the time to read. If you have any questions or comments do not hesitate to answer.

  All the best,

  Greetings,

  All new users to check in this thread, the first and the main post is a practical resource for webservices connectivity solutions.

  Try all the steps to recommend, as appropriate - if you encounter any problems apart from this I'll be happy to help you.

  Kind regards

• ANALYSIS QUESTION - OFFICEJET PRO 8600 - ALL-IN-ONE

  I HAVE A HP OFFICEJET PRO 8600 PREMIUM E ALL IN ONE-N911N PRINTER.  I have
  HAS RECENTLY HAD SOME PROBLEMS WITH THE SOFTWARE/DRIVERS DESKTOP, WHERE THE
  SOFTWARE DOES NOT OPEN ON MY DESTOP.  I CONTACTED HP TECHNICAL SUPPORT. THEY
  TOOK CONTROL OF MY DESKTOP AND MY SOFTWARE HAS DETERMINED COULD HAVE BECOME
  CORUPTED AND SO DOWNLOADED FROM THE HP WEB SITE LATER
  THE OFFICEJET 8600/DRIVERS SOFTWARE VERSION, AND THAT SEEMED TO
  SOLVE MY PROBLEMS, UNTIL I DISCOVERED WHAT I BELIEVE, IT IS A BUG OR HAS
  SERVICE CAPACITY FORGOTTEN WHEN SCANNING BY USING THE MOST RECENT SCANNING
  SOFTWARE.   THE QUESTION IS, WHEN YOU USE THE 8600 DESKTOP SOFTWARE TO ANALYZE
  A DOCUMENT: IF I SCAN A FEW PAGES USING THE DOCUMENT FEEDER, THEN,.
  BEFORE I SAVE THE FILE, I WOULD LIKE TO ADD ANOTHER PAGE SCANNED, TO THIS
  SAME FILE, BUT YOU WANT TO ADD THIS EXTRA PAGE USING THE FLAT GLASS
  (NOT THE DOCUMENT FEEDER), THE SOFTWARE NOT ME LETS NOT DO THAT. THE
  SCANNING SOFTWARE IS ALWAYS LOOKING FOR THE PAGE EXTRA (S) TO BE
  ADDED, COMING THROUGH THE DOCUMENT FEEDER (SOFTWARE ONLY)
  RECOGNIZE ADDITIONAL PAGES TO COME FROM ANOTHER SOURCE, OTHER THAN
  FROM THE SAME SOURCE YOU STARTED SCANNING WITH). I'VE ALWAYS BEEN ABLE TO
  DO THIS WITH MY OLDER VERSION OF THE DESKTOP SOFTWARE (CD VERSION ONLY)
  CAME WITH MY PRODUCT), BUT SINCE I DOWNLOADED THE LATEST VERSION, IT
  DON'T ME LETS NOT START SCANNING OF A DOCUMENT FROM A SINGLE SOURCE (DOCUMENT
  FEEDER OR FLAT) AND ADD EXTRA FROM ANOTHER SOURCE () PAGES
  CHARGER DOCUMENTS OR FLAT).  IS THERE A BUG IN THE SOFTWARE?  TO
  SUMMARIZE THE PROBLEM: WHEN YOU START A SCAN USING THE DOCUMENT FEEDER.
  WANT TO ADD ANOTHER PAGE SCANNED ON THE GLASS FLAT, THEN
  SAVE ALL PAGES SCANNED IN A FILE?  YOU CAN'T DO THAT WITH THE MOST RECENT
  SOFTWARE (DOWNLOADED FROM HP WEBSITE), BUT YOU CAN THE MAKE WITH THE
  CD VERSION OVER OLD ONES. IS THIS FEATURE MISSING FROM MOST RECENT SOFTWARE?

  OK, the new SW to use can be found here:

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Download and install this.  This will install an application on your system, called "HP Scan" extended.   This software is designed to work with any recent HP scanner that has already installed the drivers.    The software does not replace your existing HP Scan supplied with the appliance.  It is rather an alternative which offers many more features than what came with your device originally.    This software is already available with the new HP machines.

  The selection of the default source is 'Use document feeder so burdened', so you should be able to scan from the ADF or flat all in one session.

  Enjoy!

• I tried to connect my printer HP Deskjet 2540 all-in-One Series to my Dell Inspiron 15

  Separated from this thread.

  Hi Bill,

  I tried to connect my HP Deskjet 2540 all-in-One Series printer to my Dell Inspiron 15 for two days without success.  Can you help me?

  Lenora,

  I have a HP DeskJet 2540 on my Dell Inspiron 1545.

  The instructions from HP work so you should be fine if you follow them.  The CD contains a ReadMe file that describes the installation procedure.

  You must install the software first, and only then connect the printer.  Note that you will first need to install it on a USB connection.  You can change this later if, like me, you intend to use it with WiFi.

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista

• Inspiron All in one is worth the price!

  I use rounds so far, but now, I am planning to buy Dell Inspiron All in one PC. I just want to know if it's worth the price? Or should I buy Dell XPS 8300? Are there important issues that I need to know before you buy all in one PC?

  Any comments will be appreciated.

  Thank you.

  By looking at the manual Dell HERE looks like the all-in-one is basically a "laptop with a separate keyboard and best video.  Thus, it is no much you can put at level as a standard PC of type "office".

  You want to add/edit components at some point, you are better with the 8300.

• Inspiron One 2205 all-in-one does not just seeing

  I have a problem with a Dell inspiron one 2205n all in one touch.

  When I turn on the power button it stays amber, but I hear the fan start.

  A previous post HERE mentioned "so the culprit might be your internal power supply or internal 3V CR2032 lithium cell battery.

  So I replaced the battery, the pc started OK, but as to check the fault system. He said then he could supply no difficulty, so restart PC with no other attached outside duct form lead of course.

  I did and I have the same problem again, amber power button, blanck screen, but the fan seems to work more strong Dorian until I replaced the Batttery.

  Is my next option to orer and replace the power supply internal as advised in the other post. It seems that it is acoomon problem for Dell computers.

  orderd Pc 27.7.2011 model number Do502207

  Thank you very much in advance for your comments and help!

  Is the constant or flashing amber power button?

  When you have replaced the battery, you press/hold power button for about 30 seconds before installing the new?

  You can try to disconnect all BOF PC including the power cord, then press on/hold power button for about 30 seconds before reconnecting the power cord and trying to start.

  You wanted to say model 2205, not 2205n you wrote? The 2205 a external power supply. So it could be the part that failed. I don't see any registration for a 2205n.

• Replace a hard drive in 2330 Inspiron all-in-One

  You need to replace the hard drive in my all-in-one. Old drive completely zapped and no way to recover anything. After that I installed the HD, then I just insert a drive of W7, turn on and get a Setup screen?

  In addition, I have the pictures stored on an external drive. After that I installed W7, can I use these images to return to my lost OS?

  To boot from the Windows 7 disc, you will need to press F12 and choose the option to boot from the optical drive. It should start and begin the installation, but will ask you to choose different options for Windows.

  When it's done, you need to install the drivers for the hardware in this system and in the right order. You can download the drivers from the Dell Support using any PC site and save it on a USB key for installation on the AIO.

  I do not understand the second question. If you perform a clean Windows 7 install, you will not need the OS from the image. You may be able to open this image and the personal files, but you cannot retrieve any software that was previously installed. Software must be installed directly in Windows 7.

  But depending on how you created the image on the external drive, you should be able to use it in order to directly imager the new disk, with certain restrictions. You will need a bootable CD/DVD with the imaging software on it in order to start the PC and then tell her image to install on the new drive. Do not forget that some imaging software will allow you only to image the new drive if it is exactly the same size as the drive on which the image was created, but some imaging software can give you the option to install the image on a driver which is bigger than the original.

  Better read the instructions of your imaging software specific see what you need and how to use it for the new disc of images.

• Question of All-in-One-Sidebar

  If someone uses it can you tell me is there a way to get the points bookmarks bar to display in the sidebar? I have the bookmark icon there but it only shows the normal bookmarks in the browser drop-down list. My bookmarks bar is not in the list.

  Thank you!
  Nancy

  Addon Page: https://addons.mozilla.org/en-US/firefox/addon/all-in-one-sidebar/

  It's like the folder "bookmarks bar" which appears in the toolbar bookmarks by default if you press CTRL + B, but it seems that you're talking about the actual Menu bookmarks when you click on the Menu bar > Favorites and you can see all the folders. In this menu, I see also bookmarks toolbar folder (it has a blue star in the middle of the icon and I do not see that in your previous screenshot).

  After that do not understand I came up with a work around. I added a subfolder to the folder 'toolbar bookmarks"and everything in this folder to add a new layer. This created a single folder is displayed in the toolbar on the left.