Installation of Xperia S themes

Similar Questions

• Satellite U940 PSU6SA - installation of Win 7 ask for HARD drive drivers

  Hello

  not sure whether to put this under "Windows 7", Mods please move as necessary.»

  I have a ultrabook Toshiba U940 PSU6SA - 02K 002 that came with Windows 8 (not Pro) and I would like to install windows 7 on it. It has a Hitachi 500 GB and a small mSATA SSD 32 GB.
  It works already latest BIOS Toshiba 1.30.

  I turned off safe start-up and UEFI, can I start and start the windows 7 installation from USB, but it is looking for additional drivers that I can't work. I have tried various drivers of windows 7 Toshiba has had on their site for the 940 Ultrabooks but without success. (Driver Intel Rapid Storage Technology, Intel Chipset Software Utility, driver USB 3 and Intel Display Driver).

  I'm unziping the drivers on an another USB and installation is to find them, but they seem not to be what he wants.

  Any suggestions or a guide? Thank you

  What you need is the SATA driver that must be loaded before Win7 installation doesn't start.
  Please download it from here.

  I used to install Win7 on my U940.

• C6280 Installer problem - Error Message

  I am out with my Photosmart C6280.  I had to write to service customer of Hewlett main office to get a response from them on two issues: 1) the flip up stop broken paper 2) the software will not be installed completely despite of many e-mail help HP technical service.  HP sent me three discs of installation but none of them solved my problem.  I am pleased to say that HP sent a C6280 replacement for me that I received yesterday and tried the facility.  My problem persists: the installation of the software is at 66%, stops, an error message appears "the specified service does not exist as an installed service."  "I removed all the software many times through ' Add/Remove software", restarted and then reconnected the C6280 before reinstalling the software.  Same thing happens every time.  I had this problem since the purchase in December 2007, but I am able to set up the printer through my router wireless on my home network using the ethernet cable from the printer to the Netgear wireless router.  If I can print with the static IP address, but I can't use the HP software for scanning.   My desktop PC is a Compaq Presario 8000 T running Windows XP Pro.

  Anyone with similar problems?

  Thank you, but I guess I'm anxious and contacted HP tech services, which I was able to control my PC for access to level 3.  The technology fixed my registry and download new software that now seems to work.  I would certainly them once again, as they did a good job in a professional manner.

• Need to remove data files existing Installer before reconstruction Installer?

  I hope that quick question - when I build the installer of my software, it creates a folder called Volume containing setup.exe and various other support files, including a 'bin' folder that has several levels of folders located below.  If I change my software and then rebuild the installer, it puts the new files in the same place.  My concern is that there is somehow a version older installation files are not replaced that might somehow alter the new software if I don't get their first road (for example by emptying or deleting the folder of the Volume).

  On a more realistic note, even if the functionality is the same, if there are additional files from a previous version that became useless, I can decrease the size of my Installer if I remove them.  I know that not related in the folder of the Volume files are left there when I have reconstitute the installer, for LabVIEW is not delete all the files before starting a new construction.  I don't know if it is remove all the unused files/folders in the multiple levels of folders under the folder "bin".

  Does anyone know if my concerns have any basis in reality?  Should I always remove the existing Volume folder before building a new installer?

  Thank you

  Joe

  The Application Builder will place the Setup files in the specified directory.  It will replace the old files, if they exist.  Files that were already part of the Setup program, but no longer, will remain intact.  It is always recommended to delete the folder of the Volume before you build your final volume installation folder.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• JAVA update: Windows Installer required for VISTA Basic?

  URGENT (INSTALLATION OF JAVA)

  What about Windows Vista Basic

  A problem with the browser so checked it out and found update of JAVA must be installed: now it seems
  that there is a problem, it is with Windows Installer.
  Which of them or anything else must be installed to my laptop?

  Files in this download

  The links in this section correspond to the files available for this download. Download the files appropriate for you.

  File name	Size
  Redist.txt	2 KB	Download
  Installer for Windows 3.1 EULA.doc	58 KB	Download
  WindowsInstaller-KB893803-v2 - x 86-.exe	5-2. MB	Download

  In addition, the Java Help Center is

  http://www.Java.com/en/download/help/index.XML

• Cannot install the companion Xperia

  I downloaded the installer of Xperia companion here

  http://support.sonymobile.com/global-en/tools/Xperia-companion/

  But when I tried to install it, it gives an error

  "The procedure entry point not found setDefaultDllDirectories in KERNEL32.dll dynamic link library."

  See the image

  

  I tried the sfc / scannow option too. But it did not solved the problem.

  Previous updates of the companion of Xperia installed successfully. This has happened in the new update. I had the Xperia companion installed before the entry of the new update. After the new update notification came, I downloaded the new update on the Sony site, then I deleted the old version and then tried to install it. But this error comes.

  My computer is Windows 7 Ultimate Service Pack 1

  He has all the requirements.

  Welcome
  This problem happened to me, and after a long search, we found the solution
  1 - this link... chose him to your operating system

  2 - https://support.microsoft.com/en-us/kb/2533623

  

  3 - KB2533623 download file
  4 set up KB2533623
  The program recognizes the device and the end of the problem

  Concerning

• About Xperia Z5 battery recharge

  Hello. My Xperia Z5 is a few days old and I just found out that my phone charging is to have a small problem. The phone can't remove a lot of 100% charged when activated. It stops at the mark of 95-97% (98% sometimes), so he won't top even after how long it has been plugged. The same happens also when it is off, but above all we get to 100% but when turned on straight hits to below 100%. I had only managed to charge my phone 4 times since buying it. It's about once a day.

  My questions are:
  is this something common to other units sold?

  @o2jie

  It's quite strange, you could fix again the phone with XC or you could start on > safe mode and see if you experience the same

  http://talk.sonymobile.com/T5/PC-Mac-software/fatal-error-during-installation-of-Xperia-companion/m-...

• Download black screen during installation of Windows 7 from the disk.

  Original title: loading Windows 7 with windows 8 is already installed

  Dell computer brand new.  (Terrible dealer. They charge $ for help on something other than the material.)  The new computer comes with windows 8 is installed.

  Like any windows 8.  Ordinate of windows 7.  They sent the disc and no key.

  Dell will not help with installation unless you pay them $!  They say that it's a Microsoft product, and they are not obliged to help, even if it was purchased from them!  It's like buying a new washing machine or a car.  You need to contact the manufacture to get help with it?

  No, you communicate with the store, it was purchased from.  This applies to any new product I know. But not with Dell!

  Sorry for the rant.  I just found this totally outrageous situation.

  MY PROBLEM:

  Installing windows 7 from the drive, they sent.  Ten minutes into it the screen goes all black.  It is said that there is a file on the disk.  Also a button to continue.

  I stopped the installation and am at a loss as what to do...

  Thank you, Al

  Hello

  Have you checked to see if your model computer has Windows 7 drivers available from Dell for it?

  If not, it will not install properly or work properly.

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  ___________________________________

  Have you changed the order of startup and boot the Windows 7 disc, they sent you?

  You press F12 in a Dell to change the Boot order

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19500812.aspx

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  ____________________________________

  Or ask Dell to replace the disc if it is faulty.

  ____________________________________

  Or download the correct ISO file and make your own drive and use the product key that is on the sticker COST Dell sent you.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• Error while executing script root.sh on the nodes at the RAC 11 g installation

  Hello friends,

  Here, I face an error while I run the root.sh script. During the installation of grid RAC, he asked a few dependencies of prereq. There are several .rpm files that were the prerequisites for this installation. I ignore them and I continued the installation. Now, he finally threw an error when running root.sh script. I tried to install several .rpms acquisition of information from the internet, but always this script does not work here.

  Please, suggest what should I do at this point.

  

  You guys could help me out here, how I need to go further.

  Simple google search will give you missing RPM. try to install and see if that solves the problem

  https://gruffdba.WordPress.com/2012/11/06/11gr2-grid-install-clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

  Don't forget, you need up-to-date existing deconfig install and run root.sh as mentioned below article

  https://desaitaral.WordPress.com/2011/06/13/Oracle-Linux-6-1-and-libcap-so-1-cannot-open-shared-object/

  Another article with the same question - https://taliphakanozturken.wordpress.com/2013/03/02/clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

• No access to ACS GUI after installation

  Hi guys,.

  I installed successfully 5.4 ACS. However, I can't access web GUI. I created two accounts admin (during installation) and techuser (after installation) and two of them are see refuse and I can connect ACS using the CLI. However, when I'm getting access ACS via web GUI, I get "access is denied. Please contact your administrator to security for assistance. "Also, I don't see user techuser in the output of CLI command show users .

  Could you please help me with this question.

  Hi NENO,

  I could see from your description, you have created two users of CLI and you are able to connect successfully in the CLI.

  But you have not created the GUI users, so it will not login in the GUI with the CLI users.

  If we do the password reset, it resets the password acsadmin.

  Please log in to the GUI with acsadmin, and then create (System Administration > directors > accounts) admins GUI as 'techuser' or etc..

  We can able to connect after the creation of GUI.

  Thank you

  Catherine

  Please evaluate the useful messages and mark the correct answers.

• Recurring problem of 'installation': Adobe CC corrupt or download error

  First things first:
  I bought end of February the Adobe Creative Cloud of the student. I have a recurring problem which requires me to re - download and install the creative application of cloud and all related programs almost every 24 hours. (Files get corrupt as soon as I close the creative application of Cloud).

  I deleted all the previous versions of creative Cloud and CS6 applications. My laptop has specifications quite decent to run these programs (Vaio Efit15, specifications on request) and all my account info is correct (this has been validated by adobe support).

  At first, I had problems that are found in several places on this forum:

  • Symbol of endless loading when you try to start the application after installation.
    
  • App starts normally, but I only have access to trial even if connected with CC-subscription versions valid.
  
  

  First, I followed the normal procedure, suggested by the support which includes the winding and little cleaning of files like this:

  Manually this method works:

  This has really helped a lot in my case, online support chat gave me a Creative Cloud cleaning tool that allows you to simply clear the host files.

  But this works to avoid the loading icon or the trial version-bug at the launch of the creative cloud App, it does not solve the fact that the app is always corrupted as soon as I close and try to restart.

  
  Once I got close the application and try again, it does not load and remains active in the background does not at all, or I get another error:

  
  

  For those who speak English, the window says "download error", even if the download went very well.

  Even if I just crossed the penalty to reinstall all the applications I need and that you use.
  

  Every time this happens, the only possible 'solution' is to erase delete all and install it fresh. Of course this isn't a solution at all because I need these programs so frequently. Please, read before you answer. Recommended solutions as empty AAMupdate folder or change the OOBE folder then even clear host files and reset everything often offers only a false sense of ' yay, I can install stuff "until I was smack in the face every time with errors like 'Illustrator has been deleted or damaged, please remove this application in the list'" "an error occurred trying to launch Adobe Creative Cloud, this program has been corrupted or deleted".
  
  

  Thank you for your time.

  Hi Yuliyep,

  Let us know if you have checked your Hosts file, if not the please please reset your Host file. See, Advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications

  These questions are related to a blocking network, Veuileez let us know if you have tried to turn off the program of network security and checked, otherwise please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  You can also try to do a manual cleaning of the creative cloud desktop application and then reinstall it:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• Download CC fails on a new PC with no previous installation

  Download CC fails on a new PC with no previous Setup - run the adobe CC cleaning tool and redownloaded according to the advice of the forum but still fails - error 43 - advice please

  Please follow the steps below:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: ( If you do not see any folder skip this step )

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE ( App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• "App Office creative Cloud ' doesn't work anymore during installation

  I ask you to help solve a problem downloading and installation of Adobe Lightroom (trial version).

  I downloaded the .exe file and start the installation of «Creative Cloud desktop app» Later in the application office creative cloud window it is displays the progress of the installation process.

  All of a sudden he missed my laptop power; the next power, it was impossible to continue installation of Lightroom from desktop app that opens creative cloud is no longer. Also on the site, by filling in again from the General questions about the software, I can no longer continue the installation. In the control panel Windows indicates the 'Adobe Creative cloud', even if this does not work; and you can not even groped unistall to make a new download and a new facility.

  Can someone help me?

  Thank you very much

  Hi Luca,

  Please follow the steps below:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: ( If you do not see any folder skip this step )

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE ( App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

  Kind regards

  Bani

• CC Adobe on my new Mac Pro does not complete the installation after running the Migration Wizard

  Hey guys, just bought a mac pro, and assistant of migration used to transfer my programs, now adobe cc stops half way through installation and said: cc adobe, requires to solve this problem, is damaged or missing, download and install adobe cc on "http..., tried to download it again, did not work, anyone who knows what to do?"

  Hello

  Creative cloud apps cannot be migrated as a return to the top, you will need to download and install apps as a new on the new machine, please follow the steps below to remove and reinstall the creative cloud application:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager )

  4 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (It will open the folder of the user's library.)

  5. browse to the Application Support > Adobe > trash folder OOBE and AAM Updater folder so

  6. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command and then press the 'return '.

  / library (It will open the library system folder.)

  7. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  8 - go to the Apple icon > System Preferences > privacy and security > firewall > OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  9 - go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be put on ANYWHERE

  10 - Make sure of course there is no other program security Internet enabled - if it is then go ahead and launch CC app and login and check (check your extensions as well id browser it disable any toolbar security or advertising, blocking of extensions you installed them)

  Adobe 11 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  12 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg