Installed new cartridges - always shows 1/2 empty in utility

Similar Questions

• CAN´t install new cartridges HP Deskjet Ink Advantage 2545 all-in-one

  Hello!

  I m trying to install new cartridges in my HP Deskjet Ink Advantage 2545 for the first time.

  However, it is quite impossible to install them in the correct position. They are supposed to click in place.

  It was very easy to remove the 'old', but now I can´t get their place in any event.

  What I am doing wrong? I do as described in the manual... Crazy soon!

  Hi Isamarie,

  Here is a document and a video of hp.com on how to install the ink cartridges for this printer.

  Let me know if this solves your problem!

  Thank you

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet pro died with installed new cartridges

  I just installed a complete set of new cartridges in my officejet pro more than 8600, and less than a week, he died. Troubleshooting with hp support online and the diagnosis is food dead internal; cannot be replaced. Now, I want to know if I can get the printer of the new cartridges that I just installed which cost me over $ 100. I can't have the power to the printer. Any ideas?

  I answered my own question while I expected a response from the community. I have removed the screws at the back of the printer and managed to lift open in the rear, enough to get my hand inside and remove the whole print head and cartridges by lifting the white lever.

  There you go.

• 5610 - installed new cartridge - error again

  After installing new ink cartridge black on 5610-hangs at miniMac with OS10.8 AllInOne - error message - remove and replace both cartridges.  Did it even though I hadn't touched the color cartridge and it still had ink and got the same message. At another person to do and got the same message.  I got the new cartridge sit for awhile.

  Hello

  Please follow the hp for the same question paper

  http://support.HP.com/us-en/document/c01299067

  Hope this helps

• Misalignment cartridge after installing new cartridge

  On my J6480, the black print cartridge ink level was very low, so that impressions and copies were very poor. I do most of my copy in black, while during printing I use color. So I ordered another cartridge 74xl black and just to have a backup of color also decided to order another cartridge three-color 75xl. The current tricolor cartridge ink level went made just for the cartridge was still about 85% or more, then the black cartridge was approximately 15% or more before I replaced it.

  After getting my new black cartridge, I took the old one and put in the new. Then the printer ran on the new cartrdige alignment and alignment does not! After trying a few times I have replaced the old cartridge Habs, even if the Panel showed it to about 85%, the with a new and now alignment succeeded.

  Why would be to have an alignment to fail completely new black print cartridge, even with a tricolor cartrdige always at a fairly high level? The former Habs is still usable? Should I try to clean it and reuse it? I looked at my old tricolor cartridge contacts and they seemed fine. No idea why put in a new black cartridge fails with an old tricolor cartridge alignment, even if the control panel command shows the level of the Tricolor cartridge is high enough, would be appreciated.

  The alignment will fail if the colour and black cartridges will not print correctly.  I suggest you put the old cartridge in and then print a page of diagnosis as on the Six Solution of the document here.  If the color bars do not print correctly the steps described in this document can help solve the problem.

  Do not replace the Ribbon on regardless of the color cartridge, you let the printer, as this would cause a color mixture that will ruin the cartridge.  If you don't have a cartridge door, then store it as described in this document.

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• Printer HP Deskjet 3050 has prayer after installing new cartridge HP

  After replacing the black cartridge the wrong printer aligns the chops from the top of the page and forget the lines print. I tried all the recommended soplutions. Even the alignment page has half of it missing, so is not recognized by the printer. Even if printing from my computer or just copy. Is there a way to reset top factory of the printer page and start again?

  Hi DavidAH,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3050 went wrong aligns the chops from the top of the page and missing print lines.

  I recommend the following guides:

  1.) "alignment Failed" Error Message displays on the all-in-one.

  2.) Troubleshooting print quality problems.

  3.) reset of the printer.

  Hope this information helps and have a nice day.

• My new N210 always show "local oscillator 1074118626 does not lock in time.

  Hello

  About error 'local oscillator 1074118626 does not lock in time', I found the thread as here, but in my case, this error only occurred when I used two N210-newly buy.

  When I put the two side of the transmitter, which takes place the error in writing-VI (niUSRP write data Tx (CBD 2D) .vilocal oscillator does not lock in the allotted)

  When I do them as a receiver, that erroor come once again an insider-VI (nuISRP Initiate.vi)local oscillator block does not lock in the allotted)

  I have replaced those two with the old N210 and the error disappear. Why?

  Thank you ~.

  Hi Libby,

  On the firmware and FPGAS, I always make sure that both of them are updated. Thanks for your suggestion.

  Finally, I found the answer to ' why this problem (local oscillator 1074118626 does not lock in time) has occurred "because unsynchronous LO between the two USRP. I had solved the problem after connecting the two USRP with MIMO cable without any change in the LabVIEW code.

  I do not know why the old USRP didn't need this synch thing... anyway... I am pleased that my problem has been resolved.

• DeskJet 832c disappeared ink after new cartridges installed.

  I have a deskjet 832c missing ink after installing new cartridges (23/45).   Strange, but just recently, it does not print MS Word doc but prints OutLook e-mail.  Test page prints OK but faded.  B & W only options but no change and tried to color.  Removed the printer and let Win re-find-the XP (drivers) and no change.  any ideas?

  No lights or error messages.

  No new application installed on the PC.

  O/s updates are performed regularly.

  Identify the root cause.  The date code on the cartridge has been since 2008!  Apparently, I had an old cartridge laying around and finally take advantage.  After the installation of a "fresh" cartridge (2014 date code), the printer is back to normal.

  I always find it interesting that 2008 cartridge didn't print documents from MS word but print e-mail and test pages OK (but faded) w / the option to print black and white...

  in any case, case closed.

• Not full of new cartridges CP2025

  I have a CP2025 and is constantly new cartridges as show not being is not complete.  I buy original HP cartridges which should not be another nine.  I just put a cartridge $ 160 in the last week and is showing empty and my printer has stopped.  It is supposed to pring 3500 copies.  T0 may be 100 200 and now it's empty?  Anyone know what is happening.  I can't spend 100's of $$ on bad cartridges.

  It is a great option.  I didn't know that the printer had the possibility of substitution.

• Installed new toner, does not print color

  I have a Photosmart 6525 all-in-one printer and the black toner was low, so I bought new genuine HP toner - 564XL. I installed the toner and received a message on my computer thank me for the installation of an original cartridge. However, when I go to print anything, the black is not printing. The toner level shows that the black is full. Maybe I should have bought a non-genuine toner cartridge if authentic one does not!

  FYI: I received help on this problem over the phone. In case anyone else has this problem, what measures are being taken to solve the problem.

  The color cartridges are low on ink, so I had to replace both (because apparently black HP isn't really just black... it's all the colors too. Great way to make us buy more HP ink!). After installing new cartridges color, I cleaned the cartridge heads and realigned. After that, everything worked.

  Hope that helps someone.

• new, barely used shows already as photo cartridge is almost empty

  I have a photosmart 7520, running on Windows 7 and connected wireless. I recently replaced the photo cartridge for installation with a new photo cartridge, and although I barely printed anything since installing it, the ink level is already shown below. What gives? I printed some diagnostic pages, but that's about all.

  BTW, I do not have print real photos, just regular documents.

  Thanks for any help you can provide.

  Neil61 wrote:

  I had the same problem with my HP7520.  Each new cartridge I installed to replace the cartridges of set-up showed as empty after printing some documents.  What is find a solution?

  I found that had been suggested by above, leave the printer, eliminates this problem, it was very helpful. Since I started to follow this advice, I have not had any problems with the printer at all and I am happy that I bought it. I hope this helps.