OfficeJet pro died with installed new cartridges

Similar Questions

• OfficeJet Pro 8600: just installed new HP cartridges and ink colors are disabled!

  It's very expensive 4 950 XL and 951 cartridges XL that I bought at Staples a couple of months. I noticed right after installation that bright red in my images were now feel like dull brown. I printed a few pages from the control panel of the printer test. Cyan and yellow seemed pretty accurate, but magenta was a deep purple, not the lightest color pink or pink, I expected. I think that something was wrong with the series production of this cartridge. I hope I can find my receipt, but if not, always wait that HP would replace a full cartridge that was flawed in manufacturing. My HP printer has an accuracy of colors great until about a week ago, but is now almost useless for the work at home that I want to do - for example custom greeting cards, cards, posters, etc.. I printed the test pages don't show any problems with the alignment of the head, and the stripes of color show no scratches. Just a magenta that is close to her correct hue, based on my long experience with color ink jet printers.

  An HP service technician spent 1/2 hour on the phone with me yesterday, and we could not solve the problem. I had already worked through the steps that you referred me to. I have never known or heard of a problem like this, and had not the technology. When I printed the Diagnostic Page of print quality, I have absolutely perfect alignment and bars very clean black, gray and colors. Yellow and cyan looked quite right. Magenta was a deep, dark - purple not magenta I am familiar with years of work with inkjet printers. But it's printed cleanly, I started to believe that the new magenta cartridge, which had just been installed as well as 3 other XL cartridges, had somehow got filled with dark purple ink. However during our tests, asked me to remove the magenta cartridge and pick up some color from around the beak with a Q Tip. When I rubbed on the print paper, it was true magenta!

  Other theories were: (1) that somehow the circuit board of the printer and print head did not and triggers the two nozzles magenta and cyan times reported magenta printing. That seems the most likely answer. 3 the theory was that the ink in the print head channels had a leak between inks cyan and magenta. It seems less likely, because there is no impurity in the print cyan, as well as the color printing was absolutely consistent over several test pages. The tech asked me to remove the print head Assembly and clean the area around the nozzles. That did not help.

  In the end, I was offered a model of printer a HP refurbished more recent than mine. The price was very reasonable - much less than the cost of a printed circuit board or a feeling of head. He also used the same cartridges, so my XL series would be used later once provided with the new printer cartridges are consumed. I took that offer and hope to have a new printer from Tuesday. So I'm glad HP service.

• OfficeJet Pro 8600: Officejet Pro 8600: problem installing new printhead - printer 'stuck '! Help

  Following the instructions on the HP Web site: with the removed paper trys, I removed the head of existing print/cartridges. I then installed the new HP Printhead and cartridges of startup. The LCD has acknowledged that the newly inserted Assembly HP authentic. The LCD screen for the last 20 minutes and counting reads as follows: "prepare the printer." Meanwhile, the printer makes no noise and obviously done nothing.

  Can I put the printer off, then on and see if that gets the printer 'preparation' to actually do something?

  Mark

  Hello

  While the printer turned on, unplug the power cord from the back of the printer.

  Wait 60 seconds.

  Turn off the wireless router.

  Connect the power cord to the back of the printer.

  When the priner is ready, just put next to the wireless router.

• OfficeJet pro 8500. Installe4d new cartridge HP cyan. Do not print this color

  Installed a new HP cartridge twice. preformed cleaning cycles & alignment. Will not print cyan. Worked fine until I changed the cartridges

  There could be little ink clogging one of the ports of the print head. There is a document with steps to help solve the problems of location printing here.

  Make sure you do 3 levels of cleaning print head. If none of the steps of work, then you may need to replace the Cyan/Magenta Printhead or the printer.

  I hope this helps.

• My HP Officejet Pro Wireless is not printing black even with a new cartridge.

  My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!

  Hello

  Of course check that the cartridge is very savvy.

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears.  I have an Acer Aspire V3 windows 8.1 - 64 bit

  I am trying to solve this problem since last week.  No change at all.  (I uninstalled all the components of the front range of HP printers)  The printer I have is HP C6250 all-in-one.

  I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job.  With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  I thank very you much.

  Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554

  And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software

• I need to print a new Page of alignment with each new cartridge?

  I have to print a new alignment Page with each new cartridge I install on my HP Photosmart C4480?  Or can I save and reuse the original I got when first installing my printer cartridges?  The pages of the alignment, all seem to be the same when I print them with each new cartridge I install, but I'm not examine them under the microscope.

  If I can save and reuse the alignment page with encourages the replacement of cartridge, when I'm following the procedure of installing a new cartridge and the printer ask me to print a new alignment page, is there an option to skip this step?  I don't remember seen this option in the Control Panel on the printer window.

  Thank you!

  No, you can avoid printing the page by reusing the previous cartridge alignment page. Information on the freshly printed page includes the information needed to define the operating energy.

• CAN´t install new cartridges HP Deskjet Ink Advantage 2545 all-in-one

  Hello!

  I m trying to install new cartridges in my HP Deskjet Ink Advantage 2545 for the first time.

  However, it is quite impossible to install them in the correct position. They are supposed to click in place.

  It was very easy to remove the 'old', but now I can´t get their place in any event.

  What I am doing wrong? I do as described in the manual... Crazy soon!

  Hi Isamarie,

  Here is a document and a video of hp.com on how to install the ink cartridges for this printer.

  Let me know if this solves your problem!

  Thank you

• Uneven printing with the new cartridge

  I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

  The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

  This suggests a problem with the new cartridge?  Or is there anything else I can try?

  Thank you.

  See attachment.  Not for the faint at heart.

• oject pro 8500 a HP printhead empty? do not fill in again with the new cartridge runs so out of ink? pls help

  HP officejet pro 8500 wireless, windows 7 sp1, 'y' cartridge must be replaced on-screen, no change in software.

  running out of ink during printing... draws 1/4 page and then fades down to nothing at the bottom of the page. History: necessary at the end of the work (a little), but completely run out of black ink. a friend gave me her used 1/2 940 gen ch black until I got a new. I have a new hp 940xl but it's always the same, I ran everything in the Toolbox align, feed, etc., but it will always print a full page? It's like the print heads are empty and do not fill the cartridge? Please help me. She was purchased on 29/11/11 but received 12/15/11 for my birthday children so its just out of warranty thank you, Darren

  It seems that the print head was filled with air. Once there, the air is very difficult to remove.

  try to clean the print head using the printer services.

  try to use your friends print head and see if it works

  You may need to just replace the printhead

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• installing a HP Officejet pro 8600 with home premium from Microsoft. X 64 base PC

  Hi I need to use a printer HP Officejet Pro 8600 friends (what is it exactly) but could not find an exact match on HP s web site

  I have a microsoft X 64 serial number of the printer base office is {Information}
  

  Any ideas how to do this please.

  Eric

  You are happy to welcome Eric,.

  Just follow the link above and click on the download button

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4158&product=4323659&sw_lang=

  Follow the steps on the screen to install the software.

  Please let me know if you are having trouble installing,

  Shlomi

• HP Officejet Pro L7680 with windows 8

  My original computer has winXP when I bought the printer.

  I used the installation disk to install the printer.

  Worked very well.

  My computer died and I got a new one that has Windows 8.

  I can't install the printer with the Windows XP installation disc

  Can someone help me to install this printer on my new computer windows 8.

  I'm not really sure what to do

  Thank you

  Hello jschembri,

  Welcome to the Forums of HP Support!

  Regarding your request to install the L7680 on Windows 8, I have the solution. Given that the CD is not compatible Windows 8 you can install with this download: HP Officejet Pro Full Feature software and driver.

  This will be just the installer similar from the CD, only specific to WIndows 8.

  I hope this helps

• HP OFFICEJET PRO 8600: Compatibility of HP OFFICEJET PRO 8600 with Windows 8

  I inherited a printer HP OFFICEJET PRO 8600 to a close, and my laptop is on Windows 8.  When I tried to run the installation with the DVD supplied with the printer, he gave me an incompatible message saying that it has not been supported with Windows 8. Apparently, it is compatible with Windows 7.  Can I do or download to use the printer with my laptop Windows 8?

  Hello

  Download and install the latest version of the software from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards

  Shlomi