Installing Oracle Apex in Oracle 12 c 5

Similar Questions

• If you install Oracle 11 g XE with active windows firewall APEX is dead

  My first installation of Oracle 11g XE was carried out with the active windows firewall.
  The database configuration was completed in bad condition because post install scripts did not stand because port 1521 has been locked.
  You got the "Get Started" link did not stand ok and browser got an error page.
  
  Allways install Oracle database with the non-active windows firewall.
  
  You can read in the documentation, installation...
  
  2.1.2 the Windows Firewall configuration
  
  If you plan to install Oracle Database XE on a computer running the Windows Firewall, which was introduced in Windows XP Service Pack 2 and Windows Server 2003 Service Pack 1, and then connect from another computer, verify that the firewall has not been configured to block all communication between the following inbound ports. These ports are the default ports that users Oracle Database XE.
  
  1521: oracle database listener
  2030: oracle Services for Microsoft Transaction Server
  8080: Transaction oracle HTTP Server
  
  but that apply to connect from another computer at your facility, not the installation process.
  I think that the documentation must contain "disable windows firewall before you try to install.

  Allways install Oracle database with the non-active windows firewall.

  Or add the listener and apex port numbers to the list of exceptions.

• Install Oracle Application Express

  I need to install Oracle application Express, I have install 12 c database and I got to know that the Oracle Application Express will default installed with Oracle Database 12 c. now, when I try to access it displays a white screen only, below is the address of the site...

  http://localhost: 8080/apex/f? p = 4550:1:7221912349713

  Concerning

  Hi user1863983,

  In case you want to use ADR in stand-alone mode, follow the link documentation of ADR to address:

  Reference: running in stand-alone Mode

  You must do the following:

  • Navigate to the directory where ADR has been unpacked and run the following java command:

  java-jar ords.war

  • Set the location of the folder that contains the Oracle Application Express static resources when you are prompted.

  If you have downloaded apex and who unpacked in a location then this parameter would be:

  Pics

  If you install from the apex comes with 12 c database:

  \apex\images

  • Set the HTTP port to the desired number viz.8081 when prompted

  I hope this helps!

  Kind regards

  Kiran

• Forgotten original password when installing Oracle 10 g XE. What can I do?

  Hi, I have installed Oracle 10 g XE and my labtop two years ago, but I never really used it until now that I need to. The problem is that when I try to open a session asks me the password I originally took in the initial installation of the software, which I do not remember anyway. I was wondering if anyone could advice me in what should I do to begin to use the database? Thank you very much. Any help will be greatly appreciated.

  Hello

  From the Service Panel, you can start the OracleServiceXE service to start the database.

  Then, from a DOS window (connected with the OS user with which that oracle was installed), try this:

  set ORACLE_SID=XE
  sqlplus /nolog
  connect / as sysdba
  alter user sys identified by ;
  

  This way, you will have the new password for SYS.

  You will have more details on the following link:

  http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/users_secure.htm#sthref290

  Beware, if you change passwords from APEX, you will need to do some operations on the demand side too.

  Hope this helps.
  Best regards
  Jean Valentine

  Published by: Lubiez John Valentine on February 12, 2011 22:20

• How to install oracle on mac?

  I installed the next step in virtual machine to install oracle please someone help me I am a student and the teacher requirement is to install the oracle software is required for the Conference otherwise you will not sit in DB Conference Monday.

  Hello! First Oracle is a company, then perhaps you are referring to a specific software made by them?

  If its Java you do not need to put a virtual machine, it works fine on a Mac, and the installation process its fairly simple. What program or DK you trying to install?

• problem installing Oracle 10 g.

  I am struggling to install oracle 10g on my windows operating system 7. I run the installer mode compatible windows xp. After the installation at the time of the creation of the database, it displays the error-
  ORA - denied 12546:TNS:permission
  and database creation will fail... I am logged on as administrator... I am really tapped, decommissioning of my XP os seems to be the only way out.i don't want to do that... If not possible, please suggest the version of oracle compatible with win7.
  Please help me...

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to install ORACLE 10 g, compatabitlity questions...?

  Hi friends,

  I'm unable to install Oracle 10 g enterprise edition on my laptop which has windows 7 Home Basic... I can even install with windows XP... but is comapatability of the questions here... could you please help me? My friends also have the same problem...!

  It is not compatible with Windows 7. Try the Vista compatibility mode.

  Here's a link: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  It may be useful

  Die you a hero or you live long enough to become a villain... Black Knight

• When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

  Dear all

  I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

  I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

  I have installed weblogic with no problems, but when you call BI installation I get this error

  xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

  I tried to adjust/etc/security/limits

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 196608

  Memory (KBytes) unlimited

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  threads (per process) unlimited

  process (per user) unlimited

  I don't know if this is related but I thought that it might help, but it didn't

  I have enough memory on the server, so what else could be wrong?

  Thank you all

  He is certified according to

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

  in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

  I only had to run the command from the same directory where the bin file!
  I used to run it like this

  . // bi_platform - 12.2.1.0.0_aix_ppc64.bin

  I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

  Thanks to you all

• Installing Oracle 11 g 2 on windows 8

  When installing Oracle 11 g 2 on Windows 8 company I get the following error:
  I can install and do not take into account this error safely.

  INS-13001: environment does not meet the minimum requirements.
  Question: Minimum requirements were not met for this environment
  Action: Check the logs for more information or check taken configurations supported for this product.

  Hi Cory,.

  The question you have posted is related to Windows 8 Enterprise Edition and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/category/w8itpro

  I hope this helps.

• Problems when installing Oracle XE 11 g x 64

  Everything in the re - install Oracle XE, I see all of the files under the directory

  C:\oraclexe\app\oracle\oradata\XE

  It seems that no schema is created, including when coz I am trying to connect, I get the error below. Can someone guide me?

  

  The problem is resolved. I deleted some of the entries localhost in the host file and then tried to install the same. It worked.

• Installing oracle 11.2.0.4 on windows server 2008

  Hello

  I am installing oracle 11.2.0.4 on windows server 2008.

  When the installation was 48% I get below error

  D:\app\aljsbldevsrvc\product\11.2.0\dbhome_2\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear

  Thank you

  PL see the previous discussions on this topic

  https://community.Oracle.com/search.jspa?q=WFMLRSVCApp.ear&type=discussion

• Install Oracle GoldenGate Linux to synchronize two schemas from database on a single server

  Hi all

  I have to synchronize two schemas from database (Oracle 12 c) in a single host RedHat Linux to demonstrate and understand the use of OGG V12.1.2.1.0. I try to do. But it's complicated and confused me because I am new to Oracle and Linux. I followed this tutorial ( install Oracle GoldenGate for Oracle 12.1.2 on CentOS/6.x to 6.x/RHEL Linux 6.x EL ). But it is difficult to understand how I can match with two diagrams of database on a single server.

  
  And I found this tutorial (Oracle GoldenGate on Linux: two-way replication of Oracle 11 GR 2 to Oracle 11 g 2). He said: "" If you have that one host, it may be useful to change the /etc/hosts file to create aliases forhost01.example.com and host02.example.com.". What it really means?

  The other seems to be useful. But it's totally different from 1. Is that this will help my job since I use 12 c Oracle Server?

  Can I get some tips to continue my task?

  Here's another tutorial - http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/goldengate/12c/OGG12c_Integrated_Replicat/index.html

  It has everything set up on a single Linux host.

• install Oracle 12 c and migrate data from 9i to 12 c on Solaris

  HI: this is a primary control to check IAM step by step.  I need to migrate the server Oracle 9i (Solaris) to 12 c (Solaris) to the customer request. I have the instruction of installation YES from the team, the draft plan is:

  1. install Oracle 12 c binary on Solaris Server

  2 exp/imp, method to move data to 12 c 9i.

  Should I create a database "empty" by script until I use the exp/imp method to migrate data from 9i?  Or, is it better to use the option 'create the single database instance' in YES during the installation of 12 c, then exp/imp?  How about the "plug-in database" or the "CBD/PDB' concept to 12 c?  It's still new and I am not master familiar with it, that I have to use all "CBD/PDB' 12 c or not?

  Any problem that I need to know?

  Thank you very much!

  You have your point of disagreement, but it is the best approach of guys Upgrade Oracle, google for Mike Dietrich blogs on updates. And your concern that make upgrades does not allow you to practice, well, you could easily make a few tests on my upgrade on a test environment, I really don't agree with your point here...

  Sorry - but I agree with the ground.

  Anyone who still uses 9i has some questions SERIOUS architecture dealing with totally outside the DB and data. There is just too much features auxiliary available (e.g., ASM, GRID, EM) which did NOT exist in 9i or substantially changed.

  It is also a non-starter, IMHO, not to recommend as an upgrade to 11g without even knowing the 9i version that uses OP. A direct upgrade to 11g is NOT possible since the first versions of 9i. So if such a version uses OP they couldn't make a direct upgrade anyway. They will need first to upgrade to the last version 9i and then level it to 11g. Then, they should adapt to 12 c.

  Then you must take account of the need for BACKUP:

  1. PRIOR to starting to do something

  2. AFTER the upgrade to 9.2.04

  3. AFTER the upgrade to 11 g

  4. AFTER the upgrade to 12 c

  Compare that to the approach of that ground is recommended to use export/import. There is NO need to save the source DB at all since the process will NOT change. Simply a backup after upgrading to 12 c.

• Need to install Oracle forms and reports 10g

  Hi all

  I went through the first search option, and found a way to install forms for windows 8, I really appreciate if someone send me the link to install oracle forms and States 10 g in the Windows 7 operating system. I just want you to know that I have already installed Oracle 11 g express database.  Appreciate your response. Thank you

  Concerning

  Muzz

  Muzz,

  The link below is the one I used for the installation of 11g (I know that's not the 10 g that you're after) on Windows7 64 bit. But it might be useful.

  http://holowczak.com/installing-Oracle-Forms-reports-11gr2/

  Advice from the Oracle Johny: forms & reports: how to install 11 GR 2 forms and report generator in Windows 7 64 bit OS

  See you soon

  AJ

• I need to install oracle on Oracle Linux R5 U7 R12.1.1

  Dear experts,

  I need to install Oracle EBS R12.1.1 on Oracle Linux U7 R5 x 86 - x 64.

  I read the Doc-ID 761566.1 but there's missing information.

  Can anyone help.

  Dear Bella,

  Should I save my Linux with Unbreakable Linux Network, requiring a CSI that I didn't.

  Thank you very much.

  Kind regards