Installing WXP on Tecra M9
I'm trying to downgrade to windows xp on the M9.
I am invited to install the SCSI/RAID drivers for the hard disk, I do this, use the F6 command and install via a bootable floppy disk.
Once installed, the Windows XP Home edition Setup program continues, but it fails to find the file that I just installed:
The files are: iaStor.sys and iaAHCI.inf
Can anyone help me on the best way to get Windows installed on the Tecra M9?
Thank you
Hello
I think you are using the USB floppy drive, do you think? And another question: did you remove the diskette during installation? Maybe this could be the reason.
By the way: where you have downloaded the RAID drivers? Would be quite interesting.
Welcome them
Tags: Toshiba
Similar Questions
-
Installing XP on Tecra S5 - Intel Matrix Storage Manager
Hello
Im trying to install XP on a Tecra S5.
As described in the manual, I have created a disk with Intel Matrix Storage Manager.
With a floppydrive USB I tried to install XP with the F6 method.
I could choose the suitable from the disk driver and was able to create partitions and format them.
Some time later in the installation process, XP asks for the "Intel Matrix Storage Manager.
in the A: drive.
Although disk is still in the drive, there is no reaction.
Even when I change the disc, nothing happens.Any ideas?
Hello
Start the installation of Windows XP Home edition again, and when necessary to load the driver from the disk using the F6 option. This will make the disk HARD visible for the installation of Windows XP Home edition. When the HARD drive is recognized properly installing WXP. Later when WXP is installed correctly you can change the structure of the partitions.
I do not understand why is floppy disk suddenly not accessible anymore. Check the data recorded thereon.
-
Installing WXP on Satellite L30 - 10Y
Hi all
I have a Satellite L30 - 10Y (PSL33E 03L031EN) (about 2 years), it is running Vista (installed come) and I'll replace it with XP pro SP3.
I already have the drivers (from the Division of driver Toshiba), but I wonder if there are any issues that anyone knows how I could run in this case?I installed OS to my house several times, built offices with absolutely no problems whatsoever, but various articles I read there seems to be a bit of a 'ball game' different when it comes to laptops?
Also I have Vista disks more so if XP will not install I can not simply go back to Vista.Tips, advice or warnings very welcome...
Thanx
~ Q ~
Hello
Your laptop is supported for Windows XP Home edition, and there should not be any problems at all. For installing WXP using Windows XP SP2 home edition.
Download page for all the drivers, tools and utilities that you can find on Toshiba.You can also find document Setup Instructions. Install all the stuff of Toshiba following this order of installations. It is very important.
If you help please let us know. -
How to install WXP in Satellite A205-s5859?
Hello
I have a laptop Toshiba Satellite A205-s5859 new (US series), and my laptop was completely done by virus so I just want to install Windows XP instead of Windows Vista which is now experiencing in my laptop and wants to make a new partition.
When I try to install Windows XP Home edition, I get a problem which is in the Middle while confuguring my system hardware (blue screen) a messege is appearning like * "Setup did not all hard disks in your computer instead. Make sure that the hard drives are powred on properly connected to your computer and that all disks associated hardware configuration is correct. It can be runnning an installer of manufacturer_suplliedd diagnosticor "* and dvd r/w works correctly because of this message iam not able to install xp so please help me to solve this problem."
VJ
Hello
How to install WXP on this notebook is identical to that described in
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=42951 by Andrej.Check it out. Please also check which driver SATA do you need and check page Toshiba U.S. per download.
I am from Europe and Satellite A205-s5859 is not known to me.The Toshiba US support page - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download
Good luck!
-
Satellite M70: How to install WXP Pro without SP with SATA drivers?
I know that this topic is discussed repeatedly,
I get a blue screen when I try to install WXP pro... blah blah blahThe solution is to install the SATA drive.
The problem is that I don't have a floppy drive to install the SATA drive, so what can I do?
Hello
The use of the disk is the best way to install the SATA or RAID drivers.
But I searched a bit on the net and found nLite.
You can use nLite and include the drivers then you do not have to use the
floppy.http://www.nliteos.com/nLite.html
Good bye
-
Seems OK, the wife dropped the laptop while it was on and now it does not start correctly.
Recovery option did not work and I don't want to buy the CD of restoration of £30. I want to receive a ball of Vista anyway and go back to XP.Sounds like there is a corruption of boot, but I'm a bit stuck here how to install XP.
Problem is, well here is a picture from when I try to install XP from the disk. There are a few partitions with no name.
http://img232.imageshack.us/img232/6394/1002781c.jpgLooks like they are empty... but the Vista installation and the files are there somewhere. I can boot into linux from a live CD and find documents intact (phew) but can't burn it to a disk (grrr).
So, how can I install XP?
If I press c to create a new partition, there is room for 1498MB...
Help please!
Thank you.
Post edited by: Palmer
What I see on the screenshot is the typical structure of partition of disk on Toshiba laptop pre-installed with Vista.
-Unpartitioned space is WinRE partition and belongs to Vista
C and D are the OS partitions.So if you want to install Windows XP Home edition, I recommend allows you to delete all partitions. In the early days, then C, and at least this score of 1.5 GB. After doing this create new partition C and installing WXP on this.
Later, Windows XP Home edition, you can activate second partition.
BTW: what model of laptop do you have? Check if your laptop is supported WXP. I hope that you will find that all of the drivers, tools and utilities on Toshiba download page.
-
Installing WXP on Satellite L350 - 107
Hello
I recently bought a satellite L350 - 107
It comes preinstalled with Vista on the disc. Now I have an original Windows XP Home edition and I use my laptop for music production and the problem is that all my programs are not really compatible with Vista. If I want to install Windows XP Home edition.I put in the disc of Windows XP SP2 home edition and it goes to the portion of disk partition and I don't want Vista, so I try to format my whole system, but when it is supposed to perform the format it gives an error on drive p:
I'll try it again in a lil and then I'll post exact error code
Someone at - it already had a problem like this one?
Is it possible to put Windows XP Home edition on my laptop without having to get a floppy drive and having to use these programs I've read on a few posts, because I don't understand why he can't just install if you Gets an original Windows XP Home edition CD.
in any case thank you already for the answer.
I try he's now to get this error report and then I'll post it here.
Oi oi oi
donfifis
Hello, my friend
To be honest, I don't understand what you mean with this error message. The fact is that report of people here on the problems with the installation of Windows XP Home edition because the HARD drive is not visible when installing WXP begins.
To install Windows XP edition family on this laptop you need Intel Matrix Storage Manager and you can download it from the Toshiba support page. When installing Windows XP Home edition begins to press F6 and load this driver. The HARD drive will be recognized correctly and you can continue the installation of Windows XP Home edition. The problem is that you need USB floppy drive. You get one somewhere?
-
Installing WXP on Satellite A300D 11s
Hello, all.
This question has already been asked not so long ago, but I would like to know more details. Do I need to use the Intel Matrix Storage HARD drive driver for installing WXP on Vista? Judging by the manufacturer of CPU - AMD - I have not. How the problem of 'visibility' SATA then be resolved? Or not be no problem at all?
If you have already answered a question the same origin, can John, you please respond to mine? Maybe somebody could answer?
What other problems can I face to replace Vista with the good old Windows XP Home on my A300D?
Thanks in advance.
How about you, the use of the nLite?
nLite may include the SATA driver in XP operating system CD.
So you n t overall 104MB just need only take the view the SATA driver files and include it using a nLite ;)Google for nLite and you'll get more details!
-
Installing WXP on old Tecra M3
My old Tecra M3 has reinstalled XP but I don't have the CD and the winnt32.exe was not installed. Is it possible to get the required software.
I have the original product key.
Hello
If you don't have the original recovery WXP drive you can install the clean version of Windows XP Home edition. All the necessary drivers, the tools and the utilities that you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Old Tecra M3 you can find in the option ARCHIVE.Product key for the Microsoft sticker is useless. It belongs to the original version that was delivered with the machine and cannot be used for activation of Windows XP Home edition.
So what you need is the original installation disc for Microsoft. After the installation of Windows XP Home edition, you must install all the drivers, tools and utilities manually one by one.
If you need assistance with the installation order let us know.
-
Installing the driver LAN WXP on Tecra A7
Hello
I do not have a source more to install WINDOS XP on my Tecra A7 (PTA71E). I reinstalled Windows XP but I'm stuck at the level of the LAN driver, I downloaded the driver on the toshiba site, but in files, only one file "PROUnstl.exe" is a possible, and is a desinsatllation file. How to install the driver from downloaded files
Thank youList of files
e1000msg.dll
EtCo32.dll
NicCo32.dll
NicIn32.dll
PROUnstl.exe
TVERSION. XML
e1e5032. DIN
E1e5032.sys
e1e5132.cat
e1e5132. DIN
e1e5132.inf
E1e5132.sys
iAMT.cat
IAMT.din
IAMT.inf
IAMT2K.sys
IAMT03.sys
IAMTXP.sys
iresol.cat
iresol.inf
verfile. ICTIf you get this message, it means that the LAN driver is already installed.
What is the status of the network (Ethernet controller) card in Device Manager?
You should be able to find the network adapter in the network adapters box. -
Hi all
I am trying to install W2K on a Tecra 8100, but I think I'm doing something wrong, because it keeps failing.
If I just insert the CD it starts to start a load several files at a time when the Setup starts Windows 2000 (present at the bottom of the screen) and the installation crashes with a blue screen and the c0000221 error material unknown error \systemRoot\System32\ntdll.dll
I read that, during installation, you will need to press F5 (in the screen where you can load a SCSI or raid driver) and then choose Advanced Configuration and Power Interface (ACPI) PC, but after doing this I get the same error.
I have no additional material attached, it's original configuration.Any thoughts on how to solve this problem and get W2K on my laptop?
Hello
I think that this question has nothing to do with the Advanced Configuration and Power Interface (ACPI) or similar.
I read about the error systemRoot\System32\ntdll.dll message, and there is no particular reason for this error.
Sometimes some service packs missing cause this problem and sometimes hardware malfunction (RAM or HARD drive) could be responsible for a BSOD.You are able to install Win XP?
-
After installing WXP Satellite A200 reveals an error in device manager
Hello
I reinstalled my pc with windows XP, but after installation, there is a mistake of the ethernet controller in Device Manager.
Can someone help me find the right driver for this problem?Here is the information from my pc:
SYSTEM
======Host name: THUIS-1
IP address: 127.0.0.1
Username: THUIS-1\
Description:
Operating system: Microsoft Windows XP Professional (5.1.2600 version; build 2600)
Name: Microsoft Windows XP Professional
Version: 5.1.2600
Build: 2600
Install date: 2010-11-03 17:36:37
Service pack: Service Pack 2Model: Satellite A200
BIOS: TOSHIBA (version: V5.20; date: 16/08/2007)
Manufacturer: TOSHIBA
Version: V5.20
Date: 08/16/2007
Serial number: 67195868K
Motherboard: TOSHIBA (ISKAE; version: 1.00)
Manufacturer: TOSHIBA
Product: ISKAE
Version: 1.00
Chassis: Notebook
Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
Manufacturer: GenuineIntel
Max clock speed: 1862 MHz
Architecture: x 86
2: 1 024 KB level cache size
Socket type: U2E1
Version: Model 14, stepping 12
Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
Manufacturer: GenuineIntel
Max clock speed: 1862 MHz
Architecture: x 86
2: 1 024 KB level cache size
Socket type: U2E1
Version: Model 14, stepping 12
Physical memory: 2.0 GB
Memory: 1.0 GB (Bank 0; form factor: SODIMM; memory type: unknown)
Capacity: 1.0 GB
The device index: M1
Label of the Bank: Bank 0
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed:
Maximum capacity: 3.0 GB
Memory: 1.0 GB (Bank 1; form factor: SODIMM; memory type: unknown)
Capacity: 1.0 GB
The device index: M2
Label of the Bank: Bank 1
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed:
Maximum capacity: 3.0 GB
Disk: TOSHIBA MK1637GSX (149,0 GB)
Legend: TOSHIBA MK1637GSX
Size: 149,0 GB
Manufacturer: (Standaardschijfstations)
Interface type: IDE
Media type: fixed the hard drive carrier
Bytes per sector: 512
Heads: 255
Cylinders: 19457
Sectors: 312576705
Other titles: 4961535SOFTWARE
========Atheros Client Utility
Camera Assistant Software for Toshiba, Version: 1.7.147.0628
Geluiddemper (c) cd/dvd-station, Version: 1.00.008
High Definition Audio Driver Package - KB888111, Version: 20040219.000000
Intel(r) Graphics Media Accelerator Driver
Intel (r) PROSet/Wireless Software, Version: 11.01.0000
Marvell Miniport driver, Version: 8.46.4.3
mCore, Version: 9.09.0000
mDrWiFi, Version: 9.09.0000
mHelp, Version: 9.09.0000
mIWA, Version: 9.09.0000
mLogView, Version: 9.09.0000
mMHouse, Version: 9.09.0000
mPfMgr, Version: 9.09.0000
mPfWiz, Version: 9.09.0000
mProSafe, Version: 9.00.0000
mSCfg, Version: 9.09.0000
MSXML 6.0 Parser, Version: 6.00.3883.8
mWlsSafe, Version: 9.00.0000
mZConfig, Version: 9.09.0000
REALTEK GbE & FE Ethernet PCI-E NIC Driver, Version: 1.26.0000
Realtek High Definition Audio Driver, Version: 5.10.0.5464
Texas Instruments PCIxx21 / x 515/xx12 drivers., Version: 2.00.0001
TOSHIBA Accessibility, Version: 0.49.2.1C
TOSHIBA ConfigFree, Version: 5.90.07
Modem TOSHIBA Software, Version: 2.1.77 (SM2177ALD04)
TOSHIBA Supervisorwachtwoord, Version: 0.49.2.1C
TOSHIBA-zoomutility, Version: 2.00.00.24cPROCESS
=========ACS.exe (C:\WINDOWS\system32\acs.exe)
ACU.exe (C:\Program Files\Atheros\ACU.exe)
agrsmsvc.exe (C:\WINDOWS\system32\agrsmsvc.exe)
CFSServ.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSServ.exe)
CFSvcs.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe)
Ctfmon.exe (C:\WINDOWS\system32\ctfmon.exe)
EvtEng.exe (C:\Program Files\Intel\Wireless\Bin\EvtEng.exe)
Explorer.exe (C:\WINDOWS\Explorer.EXE)
freepcaudit.exe (F:\freepcaudit.exe)
Hkcmd.exe (C:\WINDOWS\system32\hkcmd.exe)
iFrmewrk.exe (C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe)
igfxpers.exe (C:\WINDOWS\system32\igfxpers.exe)
igfxsrvc.exe (C:\WINDOWS\system32\igfxsrvc.exe)
igfxtray.exe (C:\WINDOWS\system32\igfxtray.exe)
Lsass.exe (C:\WINDOWS\system32\lsass.exe)
RegSrvc.exe (C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe)
RTHDCPL.exe (C:\WINDOWS\RTHDCPL. (EXE)
Rundll32.exe (C:\WINDOWS\system32\rundll32.exe)
S24evmon.exe (C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe)
services.exe (C:\WINDOWS\system32\services.exe)
SmoothView.exe (C:\Program Files\TOSHIBA\TOSHIBA-zoomutility\SmoothView.exe)
Smss.exe (C:\WINDOWS\System32\smss.exe)
Spoolsv.exe (C:\WINDOWS\system32\spoolsv.exe)
Svchost.exe (C:\WINDOWS\system32\svchost.exe)
Svchost.exe (C:\WINDOWS\System32\svchost.exe)
TCtrlIOHook.exe (C:\WINDOWS\system32\TCtrlIOHook.exe)
TOSCDSPD.exe (C:\Program Files\TOSHIBA\TOSCDSPD\toscdspd.exe)
traybar.exe (C:\Program Camera Assistant Software for Toshiba\traybar.exe)
Winlogon.exe (C:\WINDOWS\system32\winlogon.exe)
wscntfy.exe (C:\WINDOWS\system32\wscntfy.exe)
ZCfgSvc.exe (C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe)
ZoomingHook.exe (C:\WINDOWS\system32\ZoomingHook.exe)I hope someone can help me!
GR
Go to the download page of Toshiba in http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and search drivers for Satellite A200 PSAE0E.
I can see driver LAN WXP is there and it is version 5.664.205.2007.
Can you please install and see what happens? -
BSOD after installing SP2 on Tecra A2
Hola,
A friend gave me his Toshiba Tecra A2 (489 MB RAM, 1.75 GHz, 40 GB HD, XP Pro SP1), who suffered the usual problems of the system of middle ages - in phase terminale-slow-off operation, the caused by badly clogged registry etc... I made sure that I wouldn't break it, or at least would do no worse, and that it would be better to take it to a store tech for them to watch, £30.
Then I did the stuff standard, following which worked well.
* Disc cleanup (from C:\ [Properties])
* msconfig to remove unnecessary startup programs
* Full scan disk
* full defrag
* hung in line to run liveupdate from Norton AV
* ran a standard register, basic cleaning program
* all online ran several passes of windows update, with several restarts without error.-----
He then took all afternoon install SP2 and restart, he went through the usual XP style blue splash screens, I expected post-SP installation, i.e. "Please wait...". »
seemed to crash, reboot, and then displays the blue screen of death and this message:
-----
STOP: c000021a {fatal system error}
The process of the system session manager initialization ended unexpectedly with status 0x000026c. (0x00000000 0 x 0000000).
The system has been shut down------
Since I tried all other boot options (safe mode, last known good setting, etc.) without success.
Any ideas on how to recover? I would be grateful. At the very least, I need to retrieve files from the HD before making a recovery facility.
your
First: with such errors you should first ask google or microsoft because it s knowledge base not a toshiba associated problem.
And regarding your problem: you are absolutely not able to enter the system?You can recover the files by putting HARD drive into a USB box and copy the contents to another diskk or you use 'UBCD4Win' and copy the files from the HDD to another USB - HDD.
Otherwise, you'll have some nice for study time because it can be ANYTHING!
p.s.: www.google.com
-
Cannot install drivers for Tecra S1
I have problems installing driver Tecra S1.
I tried to install the drivers that I downloaded from the site of Toshiba, but without result so far. Who can help me?
Select this option.
Hello Mark
Can you please tell us what your problem is exactly? Explain what you tried to do to us. Maybe we can better understand your problem.
To be honest, the procedure of the facilities is quite simple. -
Problem installing XP on Tecra 9000 battery
I just installed Windows XP on my Tecra 9000 and re-installed all the drivers via software Driver Genius Professional 2007. Everything worked fine except the driver of my battery (battery model: PA3084U-1BAS) and the infrared device.
I can't find the proper drivers. You can provide them for me?
Thank you very much for the help!
Louis
Hello
Usually the doesn´t need drivers battery. The only 'drivers' that needs to be installed (and which are limited to all the energy components in your system) are Toshiba Powersaver. If it is installed, then the battery stuff would be recognized.
Please go here:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Download and install the powersaver and other tools for your machine if not already done. Computers laptop Toshiba need their own tools to work properly and not just drivers.
See you soon
Maybe you are looking for
-
Hello world I'm new with labview webservices and I must realize a communication between a java application and a Web service of labview. The goal is to send a text, and save it with the webservice. I tried something for the webservice part, it seems
-
my printer keeps repeating over and over again the same print job, and I can't seem to stop. I tried cancelling but it stops and when I go to print something again it prints the same job, I canceled. Help
-
Windows 8: "we cannot connect without these permissions!" with Facebook
I have a very bizarre and unexpected behavior in Windows 8: -With any app or desktop application that attempts to connect with Facebook (Photos, Photo Gallery, Messenger, etc.). I get in the part 'connect' and I actually have to GRANT access to Micro
-
Need to update a root application handler
I need to change the search routine code hardcoded in the application of the root PcardAM - to register an another flexfield (segment1).As we can't extend a root AM and I am unable to decompile correctly AOS in order to change or add an extension of
-
Hi y ' AllGuides appear fine. But, when I try to move the guides by holding down the Cmd/Ctrl key, they move only occasionally - it is very hit and miss and very frustrating.5 k Lightroom Mac - El Capitan - CC 2015.3 (latest)Mice and Wacom Intuos lit