Installer.exe has stopped working

Similar Questions

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Plugin - container.exe has stopped working" error during installation of Firefox 36.0 via SCCM if Firefox is open during installation.

  When installing Firefox 36.0 via SCCM (System Center Configuration Manager), if the previously installed version of Firefox is open during the new installation, an error, "Plugin - container.exe has stopped working. A problem caused the blocking of the program works correctly. Please close the program. This problem occurs only if Firefox is open during the installation, otherwise the installation is successful. Note: I have included a taskkill to 'firefox.exe' in my installation script to stop Firefox runs.

  There are new logic in Firefox 36 monitor to stop crashes while the Mozilla Crash Reporter can capture data. This could have the effect of killing her task, I'm not sure. Maybe you have to kill plugin - container.exe before firefox.exe? I'm not familiar with SCCM and it might have a more graceful way to close an application.

• HPSF.exe has stopped working

  When I try to open HP Support Assistant, I get an error message that hpsf.exe has stopped working. Application has encountered a problem and needs to close. My warranty expired on 12/09/2012. HP Support Assistant disappears when the warranty expires. If this isn't what someone has an idea how I can fix?

  Hello

  It's nothing to do with your warranty ending, however this can be a fickle piece of software.

  Try the following.

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the computer.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Game.exe has stopped working

  I recently installed a game online and after the installation, I get a message saying games.exe has stopped working.  I have windows vista.  Any ideas.

  Hello lambo123,

  The relay please you use the version of the program. Also, try to perform a clean boot to verify if a background program may interfere and then check the issue. To do this, please see the link below:

  http://support.Microsoft.com/kb/929135

  Thank you

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• How to install a driver for f4500? Error dot4_plugin.exe has stopped working

  I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

  Help I am more than two hours in this and don't know where yet.

  I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

  Method 1: Perform a scan of the file system (CFS) checker on your computer

  Steps to use the SFC/SCANNOW command:

  1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
  2. at the command prompt-> Type "sfc/scannow"-> press enter
  3. follow on-screen messages to start the analysis of the system (this process can take a long time)
  The following will happen:
  Start of the phase of verification of the scanning system of-> % of full audit.
  4. once the analysis is complete, you will see a message with one of the following:
  a. not found any breach of integrity
  b. find corruption but repaired
  c. corruption that he couldn't fix

  Method 2: System Restore will take your PC to a previous state when the PC worked.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
  Type your password-> click continue (if you have one)
  2. in the dialog box the system restore-> click on a different restore point-> click Next.
  3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• Error 'setup.exe has stopped working' when installing Quicken.

  Original title: setup.exe has stopped working

  I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

  When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

  I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

  I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

  Hey, Keenon,.

  Please, remove all existing components of Quicken from the computer and do a fresh install.

  Step 1: use QcleanUI uninstall Quicken

  Follow the instructions in the article below for more information on how to use this tool.

  The use of QcleanUI to uninstall Quicken

  
  Step 2: Install Quicken

   

  Refer to this article for installation help.

  Installation of Quicken on Microsoft Windows 7 or Vista

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup.exe has stopped working

  
  

  Hello, I am trying to install a driver for a "Turtle beach II Micro" usb sound card. Whenever I try to open the .exe file, I get the following:
  Setup.exe has stopped working
  
  
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  
  
  I deleted and redownloaded the file exe, rebooted, ran sfc and for the purposes of troubleshooting, I put this card its usb on another computer in Windows 7 (bridge) and the .exe charges very well, my Dell gives me this problem. Both are Win 7 Home Premium
  Any help or advice would be appreciated
  Thank you

  Hello Lousyshot,

  On the computer Dell, right click on the file setup.exe to the Turtle Beach Micro II and select 'run as administrator '.
  Does make a difference? You are using an administrator account when you try to install the sound card? »

  Did you check Event Viewer to see if there are errors on the installation failure?

  Please answer back with an update and let us know if it helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After you install torchlight 1, my PC stops several times and gives an error "torchlight exe has stopped working".

  Hello, I recently bought torchlight 1 for my pc, Windows 7/Vista. Ive had my pc stop repeatedly. I contacted technical support of Torchlight, sent files Dxdiag and msinfo, after reviewing, the suggested running in safe mode, but, after having tried 2 times, each time, got a dialog box stating "" torchlight exe has stopped working '. " When I send a tech, their eval was as follows:

  Looks like it's a question of system rather than a question of the torchlight.  I say this because, as the game has been started in SafeMode only the windows system files are loaded into memory.  So, when Torchlight.exe attempts to access these files with torches can not due to a problem with your file system.  At this point, the only options are the following:
   
  (1) create a new user profile and attempt to play the torches of this new profile.
  (2) depending on how long it's been since your last windows installation costs, you can try to repair windows to resolve any system problems of files or reformat your PC
  (3) contact the Support technology Windows to help your application for stay of troubleshooting problems.
   
  Using technicians on site for your comments, is their a problem with my Windows 7?

  As torchlight works perfectly on my Windows 7 x 64 laptop, I suppose that "it is a question of system rather than a question of the torchlight", too. Especially when your system shuts down instead of simply display a message on a program "stopped working", brings us to this conclusion.

  The most common causes for a corrupt Windows are "optimizers" of sorts (registry cleaners, etc.), the over-zealous antivirus programs and incomplete software installations. This can affect your overall performance of the system, not only the proper functioning of a game, so reformatting/reinstall or restore an unchanged system image from backup may be the safest advice.

• AcroTray.exe has stopped working - environment Terminal

  In view of the terrible way that adobe is accessible for the support, I will try that with hopefully some results.

  Our users started getting errors using Adobe Reader X after installing Adobe Acrobat DC. They receive the message "Acrotray.exe has stopped working".

  We paid licenses so would ask for support on this issue, what is AcroTray.exe, component of domain controller, which generates the error. I'll explain our environment.

  We have a customer with 50 + users who all sign on four Terminal Server in Windows 2008 Standard x 64 servers. On this server, they have several applications such as Office,

  Adobe Reader X and many others.

  The customer asked to install Adobe Acrobat DC on four servers next to the existing installation of Adobe Reader X. After the deployment of DC, received users

  Acrotray.exe random error messages. Some get it when they connect to Windows on the Terminal Server and others get it when generating PDF.

  We cannot reproduce the error using a test account on the same server as users, the user of this test is a copy of a normal user.

  Two examples of the Windows event log: Applications.

  01 server event log (05-mar-2016 18:17:24)

  Name of the failing application: acrotray.exe, version: 15.6.30060.15959, time stamp: 0x5595fe57

  The failed module name: ntdll.dll, version: 6.1.7601.23338, time stamp: 0x56a1c6e6

  Exception code: 0xc0000374

  Offset: 0x000ce843

  ID of the process failed: 0xf34

  Start time of application vulnerabilities: 0x01d17702e19a0cfc

  The failing application path: D:\Progs\Adobe Acrobat DC\Acrobat\acrotray.exe

  The failed module path: C:\Windows\SysWOW64\ntdll.dll

  Report ID: 202e502c-e2f6-11e5-9594-005056964fb8

  Server 03 event log (2016-mar-07 10:11:12)

  Name of the failing application: AcroTray.exe, version: 15.6.30060.15959, time stamp: 0x5595fe57

  The failed module name: ntdll.dll, version: 6.1.7601.23338, time stamp: 0x56a1c6e6

  Exception code: 0xc0000374

  Offset: 0x000ce843

  ID of the process failed: 0x40cc

  Start time of application vulnerabilities: 0x01d178514ac5c12e

  The failing application path: D:\Progs\Adobe Acrobat DC\Acrobat\AcroTray.exe

  The failed module path: C:\Windows\SysWOW64\ntdll.dll

  Report ID: 8914298e-e444-11e5-9e85-0050569654e0

  Someone there experience in this and maybe he can tell how to fix this?
  Thank you!

  For those who have the same problem, I think I found the issue of the cause. When you remove the following windows registry key we found have no more problem with acrotray.exe.

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\2015]

  In this key are 3 keys of void, all 3 keys must be removed, or the key to 2015 should be removed in general. This solved the problem for us.