Is it possible to connect a Sony VCR with HDMI to a TBD release

Similar Questions

• First it is possible to connect a cDAQ-9174 with a NI TPC-2206 or the NI TPC-2212?

  Hello

  First it is possible to connect a USB CompactDAQ (cDAQ-9174) in a port USB of the TPC-2206 or TPC-2212? ¿Did you try someone before?

  Thank you.

  Hello

  It is possible, Windows XP Embedded provides users the ability to develop on a desktop PC and quickly deploy to an embedded target. With NEITHER-DAQmx on Windows XP Embedded, developers will have access to common programming languages such as C++ and .NET.

  follow the link corresponding to your request: http://www.ni.com/white-paper/7757/en

  Best regards

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• connect laptop to TV with HDMI

  I have a laptop HP Pavilion g7
  Windows 7 Home Premium 64-bit Service Pack 1
  Intel (R) Core (TM) i5 - 2450 M CPU @ 2.50 GHz
  Graphics unit 1:
  AMD Radeon HD series 7400M
  Graphics unit 2:
  Intel(r) HD Graphics 3000
  All the pilot has been updated weekenden -.
  My problem is that I do not get the image upwards when
  I connect it to my TV Panasonic, both during the
  display settings and the sound can see my TV but it
  No picture, tried all the display settings that are possible?
  but it works without problems on TV 32 "and 40" but not to smart 46 TV and my 50 "TV".

  Sorry my English but I m of the Denmark

  Hello

  Try to contact support for assistance.

  Technical support of HP, 1-800-474-6836 in North America. For all other regions click here.

• Problems with sound when it is connected to the TV with HDMI

  When I connect my laptop to my tv with the HDMI cable everything is fine display wise, but when I go to netflix and watch a movie instantly the sound comes only from the laptop. All other windows sounds come through the TV speakers. Any solution?
  Sony VAIO Windows Vista laptop. Model is VGN-NW150J

  Hi RayBeaudry

   

  Follow the steps below and verify that the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

  Check the link for assistance on the question below
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• Connection to a TV with HDMI output with a Dual-Link DVI adapter

  I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

  Not used that exact configuration but should work.

  See here to ensure that you do not overload a single BUS:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  Al

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

  I recently bought this product and had a problem when connecting it to my LCD TV.
  I used an HDMI cable to DVI to connect to the TV. Only a small part of the display shows on the TV.

  I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.
  I also used VGA adapter, connected to the entrance of the computer to the TV, same effect. Can I use VGA output on the side of the laptop to TV ok.

  Any ideas on how to adjust output dynadock parameters?

  First of all, it would be interesting to know what dynadock you exactly; a DVI or a VGA port?

  > I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.

  You should know that the dynadock has an own integrated graphics controller and video drivers to control the video stream.
  Therefore, you should change the settings directly in the settings dynadock and not on the laptop!

  Greetigns

• Lenovo Y50 only using Intel graphics when connected to the TV with HDMI output

  I recently bought a Lenovo

  you right click on the exe of the fricken game and select 'use nvidia? !!!

  I'm doing it right now with my laptop computer and connected to the tv and it works with my nvidia card... I can also say his work because of the small icon in the lower right... See the photos...

  

• Connect to the TV with HDMI to HDMI connection

  I'm trying to connect my HP Touchsmart 600 (oem Win 7) to my Samsung 850 HDTV using the HDMI connections. Both devices (PC & TV) do not even each other. Do not know how to proceed. Any thoughts there. I though it would be simple to s cable and go.

  The port hdmi input graph based solely on a call back from HP support. It's disappointing because I had two HP tell me that it was an hdmi output.

• HDMI BUG, can't connect to laptop - TV with HDMI.

  Hello

  There is a problem that bothers me not a lot of time, about a year.
  I posted my problem with my card amd with windows 7 here:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/blue-screen-due-to-AMD-card/750853cc-7590-4cb7-9F7A-8ef4059d1ecd

  Nobody was able to help me, so I entered a finding that it may be a problem of material in my amd graphics (vga) - but I have intel graphics hd also!.
  so why can't use my hdmi?
  whenever I connect my hdmi from laptop to TV. the TV does not recognize a connection.
  the hdmi is the most important for me in this story.

  Thanks for your help

  

  Hello

  Sorry to hear about the inconvenience caused.

  To uninstall the graphics drivers and reinstall it please see the article below:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572 (v = vs. 85) .aspx

  In accordance with the previous suggestion of Tech, please communicate with the device or computer
  Reference of the manufacturer for assistance.

  Contact the manufacturer of the graphics card:

  http://forums.AMD.com/game/

  For the support of the manufacturer of the computer:

  https://h30434.www3.HP.com/

  I hope this helps.

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Satellite A300 - 1GC PSAGCE connect to the TV via HDMI on Win XP

  Hey everybody,

  is it possible to connect an A300 1GC with Windows XP to a fullHD TFT via HDMI Port?
  I can't find the drivers for the HDMI port on the Toshiba support page, there is one for Vista, so it is not possible with Windows XP?

  The VGA port can´t normal display solutions-HD 1920 x 1080, correct? (ATI Mobility HD 3650, 1 GB)

  Thx a lot for your help

  Podozyt

  AFAIK for HDMI port you need separate driver. Audio and video signal should be addressed without any problem, but I'm skeptical about obtaining a full HD resolution.

• Could not find a way to connect my Sony headphones to my TV Bravia KDL-32BX310

  My TV Bravia KDL-32BX310 has "Audio In" (red and white) female connectors, but there does appear to be an 'Audio OUT', so I can't find a way to connect my new Sony headphones. (It doesn't seem to have a 'digital output'-looking on the site of the port. Help please!

  Hello Gene,

  What is the model number of Sony headphones? Most Sony headphones can be plugged into the Audio OUTPUT of a TV port. However, your TV Sony is not any Audio port OUT but has an optical Digital Audio OUT port. Only a few select Sony headphones have the possibility to connect to optical Digital OUT port of the TV.

  If your headphones do not have the possibility to connect to the Audio Digital OUT from the TV, then, Alternatively, you can connect the Sony headphones to the Audio OUTPUT of the source device port. For example, if you look at the cable program and the decoder has the Audio OUTPUT port, you can connect the headset to the cable box to listen to the sound.

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.