connect laptop to TV with HDMI

Similar Questions

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• No sound from laptop to TV with HDMI

  Hi friends,

  I have a question about his problem on my qosmio with Vista.I have connected the laptop HDMI cable to the Plasma TV and the picture and show the big shows, but the sound does not transfer to television, playing only on the laptop. Does anyone know changed etc settings I do it please?

  Hello

  Please, read here:

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  I think that you must activate the audio driver to get sound

• Problems with sound when it is connected to the TV with HDMI

  When I connect my laptop to my tv with the HDMI cable everything is fine display wise, but when I go to netflix and watch a movie instantly the sound comes only from the laptop. All other windows sounds come through the TV speakers. Any solution?
  Sony VAIO Windows Vista laptop. Model is VGN-NW150J

  Hi RayBeaudry

   

  Follow the steps below and verify that the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

  Check the link for assistance on the question below
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• Connection to a TV with HDMI output with a Dual-Link DVI adapter

  I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

  Not used that exact configuration but should work.

  See here to ensure that you do not overload a single BUS:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  Al

• Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

  I recently bought this product and had a problem when connecting it to my LCD TV.
  I used an HDMI cable to DVI to connect to the TV. Only a small part of the display shows on the TV.

  I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.
  I also used VGA adapter, connected to the entrance of the computer to the TV, same effect. Can I use VGA output on the side of the laptop to TV ok.

  Any ideas on how to adjust output dynadock parameters?

  First of all, it would be interesting to know what dynadock you exactly; a DVI or a VGA port?

  > I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.

  You should know that the dynadock has an own integrated graphics controller and video drivers to control the video stream.
  Therefore, you should change the settings directly in the settings dynadock and not on the laptop!

  Greetigns

• Lenovo Y50 only using Intel graphics when connected to the TV with HDMI output

  I recently bought a Lenovo

  you right click on the exe of the fricken game and select 'use nvidia? !!!

  I'm doing it right now with my laptop computer and connected to the tv and it works with my nvidia card... I can also say his work because of the small icon in the lower right... See the photos...

  

• Unable to connect laptop to TV via HDMI cable

  Original title: unable to connect

  I recently put HP G-62 - b51SE.I tried to connect to my HDMI TV using the HDMI cable but nothing works. Is there a way I can connect. What settings should I do in order to make the display appear on television. I have windows 7 ultimate.

  Hi Lovemicrosoft,

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Link to view:

  What should I know before adding TV tuners to use with Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

• Connect to the TV with HDMI to HDMI connection

  I'm trying to connect my HP Touchsmart 600 (oem Win 7) to my Samsung 850 HDTV using the HDMI connections. Both devices (PC & TV) do not even each other. Do not know how to proceed. Any thoughts there. I though it would be simple to s cable and go.

  The port hdmi input graph based solely on a call back from HP support. It's disappointing because I had two HP tell me that it was an hdmi output.

• Is it possible to connect a Sony VCR with HDMI to a TBD release

  It's all in the title. Y at - it a HDMI cable or adapter-> Thunderbolt? My VCR is the HD Sony GV - HD700E.

  No sorry.  There are no adapters.

• Satellite L500-13F connected to the TV with an HDMI - no sound on the TV cable

  Hello! Sorry, my English is bad.

  I have a problem, I tried to connect my laptop with TV via HDMI, but
  reading on laptop rather than TV sound...
  In Manager Realtek HD I found no "Options for HDMI output.

  Please, which suggests what should I do?

  Hello

  Have a look here, maybe it helps you:

  http://en.kioskea.NET/forum/affich-79711-laptop-sound-on-TV-with-HDMI-cable

• Second screen with HDMI audio source after connection or wake

  It is a very minor issue, but one I still dealing with.

  I have a BenQ RL2455M monitor connected to my MacBook Pro w / retina with HDMI. I plug headphones to listen to music and talk on Skype on the plug headphones of the MBP. It all works perfectly.

  The question arises when first connecting my laptop to the monitor (plugged the HDMI cable) or when waking up the laptop from sleep. If my helmet was left plugged in the headphone during this process, so I have no sound. Sound is sent through the HDMI. I have to unplug and plug in the headset to steal her back.

  Of course, El Capitan is the choice the newest device to use for output. It makes sense, when you first connect the HDMI, but less after sleep.

  In addition, this occurs when only my screen is in sleep mode and not my "computer". I changed this setting to 3 hours, because I had some programs that are not keep the laptop awake.

  Hi, kaliblack.

  Please visit Apple support communities.

  I understand that you have an audio problem with your MacBook Pro.  Let's start with a memory NVRAM reset and then do a test to see if the behavior persists.

  How to reset the NVRAM on your Mac.

  See you soon

• Connection to the TV with an HDMI cable

  I have a HP G60 laptop with Win7. When connecting to a TV with a high-definition HDMI cable, all I get on the TV screen is my screen background image. No icons, no cursor, nothing. It worked the last time I tried it about 6 months ago.  The graphics settings are like a "expanded" monitor, which puts only annoys me anything.

  try to use the Intel® driver update utility you may need new drivers of HD.