Issue of Windows logo

Similar Questions

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• When a windows logo is glued to a desktop ISP logo

  I installed a point tuneup pc from my ISP. The windows logo is stuck to the agenda after its installation. Does this mean that they are not
  compatible and can not be used?

  Hi Gussie,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that this windows logo is glued to an ISP logo on desktop. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. who is the ISP?

  4 is the issue confined to the ISP logo?

  5. what happens when you double-click this icon?

  6. the icon works after restarting the computer?

  I suggest you to refer to this article to learn more.

  Change default programs using Set Program Access and computer defaults: http://windows.microsoft.com/en-us/windows-vista/change-default-programs-using-set-program-access-and-computer-defaults

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Windows Logo key: it seems to me have it disabled on my keyboard windows logo key

  original title: the Windows Logo key

  I use Windows 7 Professional 64 bit. Some how I seem to be disabled on my keyboard windows logo key. Is no longer, it appears the start menu when you press. In fact, nothing happens when one or other of the windows logo keys. So now I can't use windows flip as well.

  Please help on how to enable the windows logo keys.

  Thank you

  The issue of the device here seems to be "what program or process disabled Windows key?'.»»

  Some programs disables the Windows key while they are running. Some dedicated (including gamer KBs) keyboards have a physical switch that disables the Windows key. There are several small software applications that offer a software control of the keyboard like AutoHotKey that can control the button of Windows script . There is also a registry setting, but it is unlikely that it is the culprit, if it has been disabled by mistake. My wireless after-market keyboard has a cmdlet that alow me to disable the Windows key.

  How to toggle the keyboard Windows key
  http://support.Microsoft.com/kb/216893

  AutoHotKey
  http://www.AutoHotKey.com/

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• Help guys from windows logo, spinning colors in windows 7 appearing in 7 seconds and more?

  because now my reset cmos on its own without any reason, how do I make it appear again within 4 seconds of darn its appearance today in 8 seconds, how do I make it appear in 4 seconds more or less hell help me guys is it average? or to reset the settings to make the windows logo boot appear faster

  To better understand here is a picture on wat im talking so guys how do starting windows logo appear as quickly as 4 seconds because iam get irritated by 7 seconds, I think it is something to block the loading so that is why it takes several seconds to appear so guys how do I remove what block the loading of the windows logo screen

  A link to my problem:
  http://www.Google.com.Ph/search?q=starting+Windows+logo&BAV=on.2, gold & bvm = pv.xjs.s.en_US. MpiVkF51mpA.O&um=1&ie=UTF-8&hl=en&tbm=isch&source=og&sa=N&tab=wi&ei=GTH2Ub6hMsbilAWvoICoBg&biw=1024&bih=672&sei=KjH2UerAOcafkQXfzoCQDQ#biv=i%7C0%3Bd%7C3egq53sDTRjAFM%3A

  I need answers because this problem affects my social life life health and make my emotional mind worse Please guys help because it irritates me to see more low profile boot as i7

  Hello

  Since the CMOS reset on its own and you need to change the battery or the BIOS settings, you will need to get in touch with the computer or the manufacturer of the BIOS to check the updates to the BIOS and to get more assistance to change the BIOS settings.

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Jet 7: The Windows Logo no longer works.

  Recently, I put the tablet at the new factory and had some problems. One of them being automatic orientation. I managed to download the driver for it and all is well. BUT, by pressing the Windows Home (Windows Logo) does not work. Can someone help me? Please?  Thank you.

  Correction of a pilot online.

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• Laptop hung on the windows logo

  HpPavilion-g6-1394sa

  Freezes on the windows logo during boot (windows 7).

  Crashes when starting safe mode.

  Crashes when you try to go into recovery tools.

  Help please.

  Hello

  303 error code is a Smart failure for the tough and would indicate that it should be replaced.  This is also consistent with the startup problem you describe in your initial post.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United Kingdom, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Z1: issues installing Windows 10 on Z1

  Trying to update my Z1 (G1) to 10 Windows with a clean install.

  I tried to follow the steps described in the following article: HP - upgrade to Windows 10 workstations;  However, all attempts make changes in BIOS in "Steps to take before upgrading" have failed, leading to the workstation refusing to turn on - I get a blank screen, 6 beeps (repetition) and have to reset the CMOS to do anything. Several attempts to cause the same problem.

  However, I was able to successfully install clean Windows 10 with the previous BIOS settings; However, after the first round of upgrades of Windows and the system is restarted, the desktop crashes just on the Windows logo (and points of rotation). Attempts to enter the SafeMode only get as far as hanging on the Windows logo (I don't even no points of rotation).

  Attempts at recovery or whatever it either does not work - all I can do is an another clean install, and then the same results after updates and a reboot.

  I reformatted my SSD TPG, and apparently the UEFI system startup (even if secure boot cannot be activated in the BIOS).

  Any suggestions other than restoration system, Safe Mode or uninstall updates, because none these work... I can't even try to uninstall the updates as my computer does not start in any form in which I can.

  Thanks heap!

  SOLVED!

  It's an absolute nightmare... In short, Intel Management Engine is not compatible with Windows 10, and that it is a layer on the BIOS, an it screws everything up, you can not even in Mode safe... Nice one Intel!

  Solution:

  1. You may or may not need to do an install clean (I did)
  2. Let all the updates, and install the drivers
  3. DO NOT RESTART
  4. DISABLE Intel Management Engine under system devices in Device Manager
  5. DO NOT UNINSTALL THE DRIVER - if you do, Windows will reinstall and enable it, and the next time you reboot, you're screwed!

  I read that the version previous 10 or 9 have no questions, but they do not seem to solve the problem, so disabling was the best option...

  Solution 2: (the first leaving just in case)

  1. See the following article on IME Firmware Upgrade
  2. Looks like the fool who has replaced my motherboard 6 months ago has not set the LFO rider back into the stop position
  3. Return the jumper to off position
  4. Activate the IME in Device Manager
  5. Reboot as instructed

  Note:

  6 beeps from the machine when you try to use the Secure Boot UEFI are because the graphics card Nvidia firmware is not compatible with Secure Boot - if you are having the same problems with the right BIOS settings disable Secure Boot (you can always use UEFI) or get a new graphics card (or simply remove the card altogether and use the integrated Intel GPU) - this should really be explained in the article for upgrade , but is not!

• How to solve a problem installation software re. the Windows logo test

  I tried to install the sorftware for a new kodak printer and display a window pop up that tells me that the software did not test the windows logo and think I may need a device driver installed. Continue installation can compromise my operating system! I contacted kodak twice to try to resolve the problem, but they were not able to help. Any ideas?

  Hello

  ·         What operating system is installed on your computer?

  ·         Did you do changes on the computer before the show?

  You can run the Microsoft Fixit next article and check.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.

• My Company of Heroes: Tales of Valor installs, continues to say a word about the windows logo program program...

  I am running XP Professional V5.1 (Build 2600.xpsp_sp3_gdr.100216 - 1514: Service Pack 3) This warning is displayed when I try to install the game:

  "The software you are installing has spent not Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this is important).

  This software will not be installed. Contact your system administrator. »

  I think maybe it's directx as the game tries to set up first, but it can also be the game itself. My computer handily meets all requirements and beyond for the use of the game to the quality maximux and my friend has on his XP service pack 2 computer. The game is also a game of 'Games for Windows PCDVD'. I need help with this ASAP because I set up a lan party developed on this game (he planned for weeks and built facilities of conquest of the whole of europe with a risk as the installer on table) and I can't seem to install which will forfiet me to participate in my own setup if I can find a way around the problem.

  Is there a way to disable the "windows logo program" blocking me? If this is not the case, what can I do to get the game installed. I think that this "windows logo program" is an addition of SP3. Please help if you know what's happening, I don't want all this time spent planning for such a stupid thing to get lost.

  What is the version of DirectX installed on your XP computer?

  Recommended is version 10.

  Here is an article with the exact error message as that of what you receive which may contain the error correction:

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798/en-us

  

• How to make the windows logo test?

  When you try to install an update to AVG free 2013, I get an error message... "- no plug n Play has not passed Windows Logo test drivers to.

  verify its compatibility with Windows XP"I have XP Home Edition.   Help, please!

  Mamawg

  Given what is happening with AVG I suggest you only contact them because they know what the problem is.

• Windows logo testing problems

  I am trying to install itunes on my computer and it says it was not installed correctly because he failed to pass windows logo testing is a way to solve this problem, because I can not sync my ipod touch now?

  I am trying to install itunes on my computer and it says it was not installed correctly because he failed to pass windows logo testing is a way to solve this problem, because I can not sync my ipod touch now?

  What version of Windows have installed you, including service pack?

  What version of iTunes are you trying to install, and where did you of?  I don't remember any warning message about failure to Windows logo test lately several that I have installed iTunes.

  In general, however, you can ignore safety warnings regarding the software has not passed Windows logo testing, at least for the software from sources deemed such as Apple.

  Please report any error messages you get in its entirety, without paraphrasing.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Computer keeps restarting, blue screen after windows logo.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  =========================
  Not much help I guess... but maybe the
  This article offers a few ideas:

  (330182) how to troubleshoot a stop
  error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  John Inzer - MS - MVP - digital media experience